• The Korean Journal of Pain
• /
• v.7 no.2
• /
• pp.170-174
• /
• 1994

Stellate Ganglion (SG) of l0 cadavers were removed during autopsy at Saga Medical College. Length, width, thickness, shape and location of SG were measured before formalin fixation. The results are as follows; 1) Length, width, thickness of SG were 22.33+5.23mm, 9.34+2.23mm and 5.03+1.19mm in right respectively, and 29.67+10.56 mm, 11.29+3.20mm and 5.51+1.09mm respectively in left. 2) Weight of right SG is 0.69+0.25 gm and weight of left SG is 1.04+0.63 gm. 3) Shape of SG is oval and snowman type. 4) Location of SG is variably located from the base of 7th cervical vertebra to first thoracic vertebra.

• Journal of Korean Neurosurgical Society
• /
• v.50 no.1
• /
• pp.30-35
• /
• 2011

Objective : Morphometric data for the sympathetic ganglia (SG) of the upper thoracic spine was investigated to identify the exact location of the SG in order to reduce normal tissue injury in the thoracic cavity during thoracoscopic sympathectomy. Methods : In 46 specimens from 23 formalin-fixed adult cadavers, the authors measured the shortest distance from the medial margin of the T1, T2 and T3 SG to the most prominent point and medial margin of the corresponding rib heads, and to the lateral margin of the longus colli muscle. In addition, the distance between the most prominent point of the rib head and the lateral margin of longus colli muscle and the width of each SG were measured. Results : The shortest distance from the medial margin of the SG to the prominent point of corresponding rib head was on average 1.9 mm on T1, 4.2 mm, and 4.1 mm on T2, T3. The distance from the medial margin of the SG to the medial margin of the corresponding rib head was 4.2 mm on T1, 5.9 mm, and 6.3 mm on T2, T3. The mean distance from the medial margin of the SG to the lateral margin of the longus colli muscle was 6.7 mm on T1, 8.8 mm, 9.9 and mm on T2, T3. The mean distance between the prominent point of the rib head and the lateral margin of the longus colli muscle was 4.8 mm on T1, 4.6 mm, and 5.9 mm on T2, T3. The mean width of SG was 6.1 mm on T1, 4.1 mm, and 3.1 mm on T2, T3. Conclusion : We present morphometric data to assist in surgical planning and the localization of the upper thoracic SG during thoracoscopic sympathectomy.

• Korean Journal of Environmental Agriculture
• /
• v.40 no.3
• /
• pp.179-185
• /
• 2021

BACKGROUND: Tomato genome editing using CRISPR-Cas9 is being actively conducted in recent days, and lots of plant researches have been aiming to develop high valued crops by editing target genes without inserting foreign genes. Many researchers have been involved in the manipulation of the crop ripening process because fruit ripening is an important fruit phenotype for increasing fruit shelf life, taste, and texture of crops. This paper intends to evaluate target sgRNA to edit the two ripening-related genes encoding pectate lyase (PL) and phytoene synthase (Psy) with the CRISPR-Cas9 system. METHODS AND RESULTS: The CRISPR-Cas9 expression vector was cloned to target the PL (Solyc03g111690), Psy1 (Solyc03g031860), and Psy2 (Solyc02g081330) genes, which are the ripening genes of tomatoes. Tomatoes injected with Agrobacterium containing the CRISPR-Cas9 expression vector were further cultured for 5 days and used to check gene editing efficiency. As a result of the target gene sequence analysis by the next generation sequencing method, gene editing efficiency was calculated, and the efficient target location was selected for the PL and Psy genes. CONCLUSION: Therefore, this study was aimed to establish target sgRNA data that could have higher efficiency of the CRISPR-Cas9 system to obtain the delayed ripening phenotype of tomato. The developed method and sgRNA information is expected to be utilized in the development of various crops to manage its ripening processes.

• ALGAE
• /
• v.23 no.1
• /
• pp.15-29
• /
• 2008

Many species in Gymnodiniales, which are unarmored dinoflagellates, are responsible for marine algal blooms and some of them have potent toxin in the cell. Their taxonomy has so far been well-defined, and several genera (e.g. Akashiwo, Gymnodinium, Karenia) have recently been re-described. In Korea, few works have been carried out on their taxonomical and molecular studies. This study focused on comparison of both morphological and molecular characteristics of five unarmored dinoflagellates on Korean coastal water: Akashiwo sanguinea, Cochlodinium polykrikoides, Gymnodinium catenatum, Gymnodinium impudicum and Karenia aureolum (=K. mikimotoi). Morphological characteristics observed here was in good accordance with the original descriptions of individual species. In addition, none of difference was found in morphological comparisons between the Korean and foreign strains. Furthermore, molecular analysis showed that the SSU rDNA sequences were generally identical according to each species. In some distinct features, A. sanguinea, which has generally the same morphological features, were divided into two groups: one was Korean isolates including European isolates, the other was American isolates. In the two groups, the nucleus was positioned differently: middle of the cells in the Korean isolates (GnSg02, GnSg03), near the epicone in American isolates (CCMP1593, CCMP1837). In addition, this was strongly supported by phylogenetic analysis, inferred from the SSU rDNA sequences. K. aureolum (GrAr01) was corresponded to European G. aureolum (=K. mikimotoi) in shape and position of nucleus, chloroplast, however, which is similar to K. digitata in view of having a finger-like sulcus. This was in good agreement with phylogenetic study of these species. G. catenatum have identical morphology except the ridge location, and their genotype of SSU rDNA was also identical to GenBank data of the same species. From this study, we found that the five Korean unarmored dinoflagellates are identical morphological characteristics and genotype to each species of foreign isolates.

• Nuclear Engineering and Technology
• /
• v.42 no.1
• /
• pp.97-108
• /
• 2010

Fluid-elastic instability and turbulence-induced vibration of steam generator U-tubes of a nuclear power plant are studied numerically to investigate the effect of design changes of support structures in the upper region of the tubes. Two steam generator models, Model A and Model B, are considered in this study. The main design features of both models are identical except for the conditions of vertical and horizontal support bars. The location and number of vertical and horizontal support bars at the middle of the U-bend region in Model A differs from that of Model B. The stability ratio and the amplitude of turbulence-induced vibration are calculated by a computer program based on the ASME code. The mode shape with a large modal displacement at the upper region of the U-tube is the key parameter related to the fretting wear between the tube and its support structures, such as vertical, horizontal, and diagonal support bars. Therefore, the location and the number of vertical and horizontal support bars have a great influence on the fretting wear mechanism. The variation in the stability ratios for each vibrational mode is compared with respect to Model A and Model B. Even though both models satisfy the design criteria, Model A shows substantial improvements over Model B, particularly in terms of having greater amplitude margins in the turbulence-excited vibration (especially at the inner region of the tube bundle) and better stability ratios for the fluid-elastic instability.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.26 no.2
• /
• pp.203-209
• /
• 2016

According to the wear detection history for the steam generator tubes in the nuclear power plant, the outer tubes inside the steam generator have more problems on the flow-induced vibration than inner tubes. Many researchers and engineers have used a specified added mass coefficient for a given tube array during the design stage of the steam generator even though the coefficient is not constant for entire tube in cylindrical shell. The aim of this study is to find out the distribution of added mass coefficients for each tube along the radial location. When numbers of tubes inside a cylindrical shell are increased, values of added mass coefficients are also increased. Added mass coefficients at outer tubes are less than those of inner tubes and they are decreased with increasing the gap between the outermost tube and the cylindrical shell. It also turns out when the gap between the outermost tube and the cylindrical shell approaches infinite value, the added mass coefficient converges to an asymptotic value of given tube array in a free fluid field.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.26 no.3
• /
• pp.174-180
• /
• 2006

Steam generator (SG) tubes are expanded inside tubesheet holes by using explosive or hydraulic methods to be fixed in a tubesheet. In the tube expansion process, it is important to minimize the crevice gap between expanded tube and tube sheet. In this paper, absolute and differential signals are computed by a numerical method for several different locations of tube expansion inside and outside a tubesheet and signal variations due to tubesheet, tube expansion and operating frequencies are observed. Results show that low frequency is good for detecting tubesheet location in both types of signals and high frequency is suitable for sizing of tube diameter as well as the detection of transition region. Also learned is that the absolute signal is good for measuring tube diameter, while the differential signal is good for locating the top of tubesheet and both ends of the transition region. In the case of mingled anomaly with tube expansion and tubesheet, low frequency inspection is found to be useful to analyze the mixed signal.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.7 no.5
• /
• pp.19-24
• /
• 2003

We analysed seismic phases recorded by the 10 December 2002 Cheolwon, Korea, earthquake of $M_{L}$ 3.6 and obtained source parameters such as hypocenter, origin time, earthquake magnitude. Velocity and acceleration records used in this study are from the KMA and KIGAM seismic networks. Due to the location of the epicenter in the north of the DMZ(Demilitarized Zone), direct Pg phases were recorded only at five stations in the area south of DMZ. Identification of refracted Pn phase as the first arrival is difficult in most stations. Therefore, the hypocenter determined by existing routine methods could be affected by a large error. In order to avoid the possibility of the problem, we employed a method of seismic phase analysis developed by Kim et al.. The direct, refracted, and reflected P and S phases were successfully identified using the method together with the travel time curve data. In order to improve the accuracy in determination of the hypocenter and origin time, we included PmP and SmS phases in the analysis in addition to the phases such as Pg, Pn, Sg and Sn. The epicenter, depth, and origin time of the Cheolwon earthquake determined based on data of 11 stations within 200km from the epicenter are $38.81^{\circ}$N, $127.22^{\circ}$E, 12.0km, and 7:42:51.4(local time), respectively. The average value of the local magnitude based on the Richter's definition from all the stations is 3.6 in $M_{L}$. This magnitude is smaller by 0.2 and 0.5 compared with magnitudes determined by KMA and KIGAM, respectively.

• Convergence Security Journal
• /
• v.18 no.1
• /
• pp.85-91
• /
• 2018

In this study, we design a marine environmental information service system with satellite images based on satellite images to reduce the damage caused by changes in the marine environment. The system provides satellite oceanographic information such as water temperature, chlorophyll, float, etc. as hierarchical texts, which is implemented as a unit module Web service so that it can be expanded in OpenAPI environment. And stability of system plug-in portability, service hours, data extraction precision and speed are used as a basis for diagnosing service stability. By securing the function and performance of the service system implemented in this study, it can be expanded to a complex technology that can customize the users by group by adding not only general services of existing systems operated by location but also information about a specific interested areas. Especially, various other items of interest including marine environment information are developed in modules, so we expect to be able to expand and service the system by plugging into the system and to spread it in technical linkage with the related institution information system.

• Journal of Cadastre & Land InformatiX
• /
• v.53 no.2
• /
• pp.107-122
• /
• 2023

The demand for spatial information in the era of the 4th Industrial Revolution is expanding Additionally, interest in attribute data related to geography or location is increasing. In the field of spatial information, spatial information policies and services tailored to the public can be provided through linkage and integration with new attribute data, and these data are resources for this purpose. In order to meet this expanding and diverse demand for spatial information utilization, it is necessary to develop technologies for linking and utilizing various attribute information such as public data. In this study, we aim to present a technology development strategy for linking and integrating attribute data and spatial information through a review of theories related to data linkage and integration, the current status of data on public data portals, and existing prior research. As a result, it was suggested that the data identifier of the attribute data to be linked should be used to develop linkage technology between spatial information and attribute data, and an attribute data linkage process that can be used when designing a prototype for technology development was presented.