• Journal of Korean Society of Water and Wastewater
• /
• v.33 no.5
• /
• pp.389-394
• /
• 2019

In order to determine the location of average concentration and distribution status of dissolved oxygen in the rectangular aeration tank of the sewage treatment plant was analyzed and the difference of dissolved oxygen concentration was remarkable at each location. Compared with the computational fluid dynamics analysis, it was found that the results were consistent with the measurement results by showing the difference of dissolved oxygen concentration between the locations. Based on the measured data, the representative location of dissolved oxygen in aeration tank was selected by using statistical analysis method and the representative location was expressed in three-dimensional coordinates(LWH : 25%, 50%, 33%) from flow direction and left wall. Also the difference between the dissolved oxygen concentration at the actual measurement location and the average concentration value of the entire aeration tank was founded, and the equations for calibrating the automatic measurement data considering the actual measurement location were calculated.

• Journal of Korea Port Economic Association
• /
• v.17 no.2
• /
• pp.61-87
• /
• 2001

The purpose of this paper is to analyze the location, population growth. and cargo concentration of Korean port-cities. In the location theory, Sommer (1976) and McGee (1967) models are newly introduced, as are the Rimmer (1967), Bird (1965), Hoyle (1981) models. which were already introduced in previous studies from Korea. Analysis of population growth in the Korean port-cities is conducted using data from 1966 to 1998. Rimmer and Hoyle's concentration models are used to measure cargo concentration from 1966 to 2000. The main results of this paper are as follows: First, Korean ports are concentrated on the East Sea, the Southern Sea, and the West Sea. Their locations are closely related with the hinterland. the inland city, and growth of port-cities. In considering the foreign countrys' cases, Korean port-cities are similar to the models of Bird and Hoyle. Second, the populations of Ulsan and Pohang grew at the fastest rate in 1966-1998, while the port cities in the Honam and Jeiu region grew at much lower ratios. Most port cities are located near large industrial complexes. Third the growth rates of Gwangyang, Daesan, Pohang, Pyungtaeg, and Samchunpo increased, while those of Busan. Mukho, Masan, Mogpo, Yeosu, and Sokcho declined. Of particular note, the growth rate of Busan remained negative after the late 1980s. Fourth. empirical results using the Rimmer (1967) model indicate that Gwangyang, Daesan, Pyungtag, and Pohang have shown the concentration. But the deconcentration was shown from the Busan, Mukho, Janghang, Gunsan, Mogpo, Yeosu, Masan, Sokcho. and Jeju. Fifth, the concentration of ports located in West coast region has shown the mixed results between concentration and deconcentration except the concentration of early 1970s and 1990s. The concentration of ports located in East coast region has shown the concentration before the middle of 1980s. And deconcentration after the middle of 1980s have appeared. The Southern coast region has shown the continuous deconcentration except the partial concentration of early 1986. and 1991. Planners of Korean ports should find out the factors of concentration and deconcentration of each ports and should determine factors such as investment priority level. size and scope in order to ensure the balanced development of regional ports and port-cities.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.1207-1212
• /
• 2008

The purpose of this study is to evaluate the location of the outlets in the mechanical ventilation system installed in apartment. We performed the numerical analysis to estimate the ventilation effectiveness and the indoor $CO_2$ concentration considering the occupants and the condition with inlet and outlet in each room. From the numerical results, modified location of the outlets is about 10% high than designed one with respect to the ventilation effectiveness when the occupants are not considered. But designed location of inlet and outlet in living room and kitchen is better than modified one with respect to the reduction of $CO_2$ concentration in the living room and kitchen with occupants. In case of our model, Air change per hour (0.7) is not enough to sustain the acceptable criteria of $CO_2$ concentration (1000ppm) in the room with the occupants

• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.211-218
• /
• 1991

In this study, the break of the rotary blade which is occured from a stress concentration of the inside of blade by the outside impulsive load, is analyzed to 3-dimension used by the Freezing Photoelastic Method. These results are as follows. 1. The bending and compression stress are the greatest at the location of blade case. 2. The section area of 3cm-location from the blade case is the smallest, therefore, there are breaked 58% of all at this location and are proofed to the most danger section 3. The section area which by stress concentration of 3cm-location from blade case is caused by the production of blade, and it was higher danger of break than another location's. 4. In the location of 6cm and 9cm from the blade case, the bending stress has received a little and the section area has larger than another's, so it is not almost possible that the break at that location 5. In order to prevent of break, the external part which has contacted soil have to made tender for receiving a little stress and the internal part which received a large stress have to strengthen.

• Journal of Korea Trade
• /
• v.25 no.5
• /
• pp.93-109
• /
• 2021

Purpose - The logistics industry is often featured by its location relevance and industrial concentration. Industrial concentration is conducive to the effective transmission of information by reducing transaction costs and improving transaction efficiency, thus promoting the development of trade. The main purpose of this paper is to measure the spatial total factor productivity and location quotient of the logistics industry in Korea, and to study the impact of the logistics industry efficiency and agglomeration effect on import and export trade in Korea. Design/methodology - First, used the spatial stochastic frontier method to measure the spatial total factor productivity of the logistics industry in Korea, this serves as the efficiency index of the logistics industry in various regions of Korea. Second, calculated the location quotient (LQ) of the logistics industry to measure the industry's concentration degree. Third, employed a spatial econometric model to analyze the impacts of factors such as the efficiency and concentration levels of the logistics industry on import and export trade in Korea. Findings - This study's main findings can be summarized as follows: this study found that the overall efficiency of the logistics industry in Korea needs to be improved, even though it showed an upward trend in all regions of the country; Moreover, the agglomeration level of Korea's logistics industry needs to be improved; Finally, the positive spatial correlation and industrial agglomeration effect of Korea's logistics industry had a positive impact on the country's import and export trade. Originality/value - This study is innovative in terms of research perspective and methods. Most of the previous studies have measured the development level of the logistics industry using the logistics performance index (LPI), Fewer studies have assessed through the spatial total factor productivity and location quotient of the logistics industry in Korea to measure the efficiency index of the logistics industry in various regions of Korea and concentration degree, as well as there was almost no study on the impact of logistics industry efficiency and agglomeration effect on import and export trade in Korea. This study addresses this limitation by analyzing the impacts of the efficiency and agglomeration effect of the logistics industry on import and export trade in Korea.

• Journal of the Economic Geographical Society of Korea
• /
• v.14 no.4
• /
• pp.671-683
• /
• 2011

The technical development of transportation and communication increases freedom of location choice. This higher freedom allows to company can pursues bigger profit than before. Company's separated spatial configurations tend to go to most optimal location, so some places showed unexpected agglomeration. This study conducted to prove "dispersed concentration" for specific example, pharmaceutical enterprises, in real business world. As a result, separation of spatial configuration clearly observed as product output goes bigger and R&D's depth goes deeper. And spatial concentration of each function was found. Most headquarters are located in Seoul, R&D centers make agglomeration at some spaces. Plants' location concentrated until 1990s, but, in 2000s, plants expand out of metropolitan area.

• Korea Journal of Hospital Management
• /
• v.29 no.3
• /
• pp.54-69
• /
• 2024

Purposes: This study aims to analyze the location patterns, concentration, and accessibility of clinics in Seoul with the grids of a geographic information system(GIS) and provide useful indicators for research on hospital and clinic management and policies based on the results. The study especially sets out to identify areas falling behind in the service of the essential medical care departments based on an analysis with 250m×250m grids and contribute to efficient medical business management and public healthcare policies based on the results. Methodology: The study analyzed clinics in Seoul in terms of concentration, distribution and clustering patterns, accessibility, and hot spots by dividing the entire city into 500m×500m cells and generating grids. The accessibility analysis for the essential medical care departments was especially in detail based on grids in a 250m×250m cell size. Findings: The Herfindahl results show that plastic surgery and rehabilitation medicine recorded the highest concentration level. General medicine and dermatology recorded the highest Moran's I value, and internal medicine was the highest in hot spots. Obstetrics and gynecology capable of child delivery showed considerably lower accessibility in the grids corresponding to Gangseo-gu, Yangcheon-gu, and Gwanak-gu. Surgery had low accessibility in the grids corresponding to the northern parts of Gangseo-gu for the total population. Practical Implication: Unlike previous studies whose analyses covered wide areas, the present study examined minute spatial patterns, concentration, and accessibility based on an analysis with 500m×500m or 250m×250m grids. Based on its findings, the study expects a more minute analysis for future research on medical business management and policies.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.6
• /
• pp.131-138
• /
• 2004

The objective of this paper is to decide optimal location of a pin-hole to minimize stress concentration around the hole in a rotating disc. The focus of this investigation is to evaluate the effect of pin-hole on stress distribution around the hole using optimum design technique and finite element analysis. Design variables are the radial and the angular location of pin-hole from center of the hole and objective function is the maximum stress around hole in a rotating disc. Using first order method of optimization technique, we found that the maximum equivalent stress around the hole with optimized pin-hole could be reduced by 15.1% compared to that without pin-hole.

• Korea Trade Review
• /
• v.47 no.4
• /
• pp.293-309
• /
• 2022

The purpose of this paper is to analyze the import and export volume of Jeollabuk-do to establish a plan to activiation Saemangeum New Port. To this end, this study utilized the HHI(Herfindahl-Hirschman Index), LQ(Location Quotient) analysis using the annual data set from the Korea Trade Statistics Promotion Institution between 2015 to 2020. As a result, it has been confirmed that the degree of export volume concentration (HHI (Herfindahl-Hirschman Index)) in Jeollabuk-do has been increasing over the past 5 years. According to results of LQ(Location Quotient) analysis, Brazil had the highest index in the case of exporting countries, and Meat, edible meat offal (HS 2) had the highest index in the case of export items. This paper is meaningful in analyzing the export structure using import and export volumes and proposing a plan to improve the competitiveness of Saemangeum New Port.

• Journal of Korean Society for Atmospheric Environment
• /
• v.31 no.6
• /
• pp.585-592
• /
• 2015

In this study, by applying mobile based GIS and image analysis of particulate matter ($PM_{10}$) concentration in Seoul and Ulsan in Korea, to identify the user's location and also implemented the application to information exchange. It strengthened citizens' access to air quality information through the application and derived the expanded environment information sharing through real-time user participation. Through atmospheric concentrations image analysis, it showed a new environmental information construction possibility. It had the effect of expanding the information collecting through the local user participation on the limited information collected area which place is not yet constructed atmospheric monitoring network. Location-based particulate matter information service application provides a user location's $PM_{10}$ information from the 25 urban air monitoring network real-time database of the Ministry of Environment. Furthermore, if the user sent a picture of the atmosphere to the server, should match the image density values of the database and express on Seoul's maps through the IDW interpolation. And then a $PM_{10}$ concentration result is transmitted to user in real time.