• Journal of the Korean Society for Precision Engineering
• /
• 제20권9호
• /
• pp.63-69
• /
• 2003

As increasing underground facilities, more effective management is needed nowadays. It is important to get an accurate information of underground facilities to manage that, so some methods of detecting location - electromagnetic induction method, ground penetration radar method, sound wave method - are used to obtain the information of underground facilities. In this study, a magnetic method to detect underground facilities was developed. In the magnetic method, underground facilities are detected by a detector and the magnetic marker which is a permanent magnet and used to marking the location by attaching underground facilities. A test field was constructed for experiment with the magnetic marker, PVC pipe, and steel pipe under ground 1.5m, and a ferromagnetic detector was used for measurement. Magnetic strengths of the magnetic marker were measured by the detector at each location in the test field, and analyzed by magnetic field analysis tool in the same condition. In the result, the underground pipes of 1.5m below were detectable within the deviation $\pm$0.2m. When For applying this method, it should be considered that ferromagnetic materials around the detector could affect a measured value.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제14권3호
• /
• pp.1337-1362
• /
• 2020

Advances in localization-based technologies and the increase in ubiquitous computing have led to a growing interest in location-based applications and services. High accuracy of the position of a wireless device is still a crucial requirement to be satisfied. Firstly, the rapid development of wireless communication technologies has affected the location accuracy of radio monitoring systems employed locally and globally. Secondly, the location is determined using standard complex computing methods and needs a relatively long execution time. In this paper, two geolocalization techniques, based on trigonometric and CORDIC computing processes, are proposed and implemented for Bluetooth-based indoor monitoring applications. Theoretical analysis and simulation results are investigated in terms of accuracy, scalability, and responsiveness. They show that the proposed techniques can locate a target wireless device accurately and are well suited for timing estimation.

• Journal of Korea Multimedia Society
• /
• 제23권2호
• /
• pp.255-261
• /
• 2020

As the accidents of cargo and passenger carrying ships occur, the stress faced by the vessel users is increasing. The risk factors for accident deterioration in remote marine area are stronger than those in road accidents, and therefore the need for safety control is greatly emphasized. To overcome such issue, a lot of effort has been made in terms of conducting research and development of the passengers and freights location tracking system. However, the inner bulkhead structures are made of aluminum/steel which is a difficult material to transfer location information through. This study aims to measure the receiving rate of LoRaWAN signal inside the aluminum/steel bulkhead structures with variation in reception strength and distance. The test was taken place at platforms with 6T and 8T enclosures to reflect the same conditions found in fishery patrol boats. The receiving rate of through-the-wall communication at 10M distance turned out to be 86% in case of using two 6T enclosures, and 73% in case of using one 8T enclosure. The result showed that the receiving rate was more affected by the thickness rather than the number of enclosures.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2008년도 추계종합학술대회 B
• /
• pp.316-319
• /
• 2008

Most of campus vehicle management systems, so far, have simple functions such as managing vehicle in/out or issuing parking tickets. Recently some of them use RFID tags to count total numbers of cars in the campus, excluding exact parking position management. In this paper we propose a new campus vehicle management system using wireless sensor network location management scheme. This system adopts RSSI based location management method with some performance improvement technique. According to the experimental result, this proposed scheme can be used to implement an effective campus vehicle management system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 한국해양정보통신학회 2007년도 추계종합학술대회
• /
• pp.457-461
• /
• 2007

In many applications, received signal strength indicator is used for location tracking and sensor nodes localization. For location finding, the distances between sensor nodes can be estimated by converting received signal's power into distance using path loss prediction model. Many researches have done the analysis of power-distance relationship for radio channel characterization. In indoor environment, the general conclusion is the non-linear variation of RSSI values as distance varied linearly. This has been one of the difficulties for indoor localization. This paper presents works on indoor RSSI characterization based on statistical methods to find the overall trend of RSSI variation at different places and times within the same room From experiments, it has been shown that the variation of RSSI values can be determined by both spatial and temporal factors. This two factors are directly indicated by the two main parameters of path loss prediction model. The results show that all sensor nodes which are located at different places share the same characterization value for the temporal parameter whereas different values for the spatial parameters. Using this relationship, the characterization for location estimation can be more efficient and accurate.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제9권9호
• /
• pp.3412-3431
• /
• 2015

This paper considers the effect of co-channel interference on hybrid satellite-terrestrial relay network. In particular, we investigate the problem of amplify-and-forward (AF) relaying in hybrid satellite-terrestrial link, where the relay is interfered by multiple co-channel interferers. The direct link between satellite and terrestrial destination is not available due to masking by surroundings. The destination node can only receive signals from satellite with the assistance of a relay node situated at ground. The satellite-relay link is assumed to follow the shadowed Rice fading, while the channels of interferer-relay and relay-destination links experience Nakagami-m fading. For the considered AF relaying scheme, we first derive the analytical expression for the moment generating function (MGF) of the output signal-to-interference-plus-noise ratio (SINR). Then, we use the obtained MGF to derive the average symbol error rate (SER) of the considered scenario for M-ary phase shift keying (M-PSK) constellation under these generalized fading channels.

• Journal of the Korea Safety Management & Science
• /
• 제15권2호
• /
• pp.129-134
• /
• 2013

In this study, the heat flow analysis compatible commercial code CFX 11 was used to develop the structure inside PCB circuit board devices, which could stable radiant heat as well as the cooling device within it. In case of modifying the arrangement of electronic parts on the PCB inside the multi channel temperature measurement board devices, radiant heat effects did not show a rising tendency, whereas the overall temperature went down in case of installing the vents in the outer case of PCB circuit board devices. In terms of installation location, it was the most appropriate to install it on the electronic parts with no heat. Besides, in case of mounting the fan as a cooling device by considering various user environments for multi channel temperature measurement board devices, the radiant heat effects were shown higher than in case of installing the vents, and the middle sections were the most appropriate to its installation location. In case of changing the wind quantity of the fan from its selected installation location, the best radiant heat effects were shown at high speed as expected.

• Journal of Korean Society of Rural Planning
• /
• 제19권1호
• /
• pp.149-164
• /
• 2013

This article purposes to make a GIS database of South Korea rural village forest. So we first tried to collect data of their geographic coordinates or location from the many references on the rural village forest. As the result, we collected locations of the 634 forests. Boundaries of the 462 forests could be made by using their satellite imagery. Finally we implemented GIS database of the 462 traditional rural village forest in South Korea. Furthermore we surveyed 100 forests out of them. They were analyzed in the view of location, area, wood species, cultural assets and activities of inhabitants. These data can be used in the rural village planning and I look forward this database is helpful to preserve existing traditional rural village groves as a lasting legacy.

• Journal of Biosystems Engineering
• /
• 제27권4호
• /
• pp.293-300
• /
• 2002

Surface crack detection is an important aspect in the quality control process of egg markets. The acoustic vibration of an egg could be used as a critical factor in evaluating the eggshell quality. The mode shape indicates the egg vibration behavior at different locations with respect to the input impulse and provides important information for the optimum sensor location to obtain the desired acoustic measurements. Theoretical analysis and experimental measurements were conducted to determine the acoustic vibration modes in eggs. The resonant fiequencies of the first and second resonance mode of intact eggs were found to be distributed between 2kHz and 7kHz range. The measured mode shapes of an egg were similar to theoretical shapes of homogeneous, elastic spheres. An elliptical deformation at the equator ring of the egg was observed. The frequency peak of this mode was dominantly present in the frequency spectrum of an intact egg impacted at its sharp position. The mode shapes related to the first resonant frequency of an egg shelved that the optimum location for the measuring sensor was the 180 degrees position. A optimum location for the egg support was found to be the 90 degrees position having the smallest vibration magnitude.

• Journal of Korea Spatial Information System Society
• /
• 제5권2호
• /
• pp.91-103
• /
• 2003

There are currently tremendous amount of geotechnical information saved, which has been qcquired for essential application of site selection, plan, design, constructin, repari in the builing work. However, due to the lack of the location data attribute, there has been a trouble in its analysis and GIS implementation. In this study, the geotechnical information aquisition program(PGeo) for real-time database in the field and geotechnical information reporting program(GeoReport) by Web-GIS for additional data input and its reporting function has been developed.