• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.24 no.4 s.175
• /
• pp.1024-1031
• /
• 2000

The plate waves propagating in thin plates have dispersive nature showing the dependence of velocities on the frequency. Wavelet transform (WT) using Gabor function can be used to analyze the dispersive waves in the time-frequency domain, and then to find the arrival time of the waves propagating in the plate. Plate waves in the aluminum plate of 3 mm thickness were identified and generated by pencil lead breaks and the lowest order symmetric ($S_o$) and antisymmetric ($A_o$) modes were analyzed by the WT method. The measured group velocities agreed very well with theoretical predictions in the frequency range of 50-400 kHz. The pencil breaks were also used to simulate acoustic emission sources in the plate, and the source location algorithm using the wavelet transform of dispersive plate waves was found to give accurate results.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.462-471
• /
• 2008

Flight recoder is used to analyze the accident factors and prevent the accident. In the analysis of the flight recorder, the most important factor is how to estimate the precise location of the flight. Traditional aviation navigation is based on stable sensors such as DME and VOR. In order to enhance the precision of the location estimation, the integrated navigation algorithm is designed to incorporate DME, Air data sensors and INS(Inertial Navigation System). The results demonstrate that the proposed algorithm can achieve better accuracy, comparing with the traditional navigation schemes, in flight location estimation.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.2
• /
• pp.173-181
• /
• 2010

This study was conducted to investigate the possible installation of small hydro-power plant at the discharge point of Gumi sewage treatment plant (STP) using treated wastewater. Sufficient amount of water to transfer to electric power and the selection of proper location are two essential elements for the construction of small hydro-power facility. Preliminary analysis based on site visit and existing data in Gumi STP were made. Capacity of the small hydro-power plants and exact location were determined by geomorphological condition and flow duration characteristics. Flow duration characteristics and its duration curve were identified using monthly rainfall data in Gumi STP. Relevant facts of small hydro-power system in other STP were referred to adopt to Gumi STP situation. Flowrate of treated effluents and effective head between flow chamber and the location of hydraulic turbine in Gumi STP are found to be $3.70m^3$/sec and 3.5m respectively. Electric generation rate based on this feasibility study was estimated to be 86.3kW/h. Yearly electric generation rate was expected to be 932.4MMh. Proposed small hydro-power plant construction in Gumi STP is to be reasonable.

• Journal of the Korean Society of Physical Medicine
• /
• v.5 no.4
• /
• pp.685-692
• /
• 2010

Purpose : The purpose of this study was to investigate effects of repetitive hand task on upper extremity proprioception and dexterity. Methods : Experimental group who had done hand task since last 1 year and young adult control group was recruited this study. Proprioception was measured positioning errors of elbow and wrist on three dimensional coordinate system by Winarm software(Zebris Medcal GmbH, Germany). And dexterity was measured by box and block test. Statistical analysis was used independent t -test. Results : When elbow moved from flexion to extension, there were significant difference on error of x axis in wrist location and erros of x, z axis in shoulder location(p<.05). When wrist moved from flexion to extension, there was significant difference on y axis in finger location error(p<.05). And there significant difference on dexterity(p<.05). Conclusion : In conclusion, repetitive hand task increase upper extremity proprioception and dexterity. The physical therapy in industrial workers should inhibit overuse injury.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1278-1281
• /
• 2004

Several workers reported the relationship between osteoporosis and age-related reductions in the BV/TV (bone volume fraction) of vertebral trabecular bones. However, there were few micro finite element (micro-FE) models to account for the treatments of the osteoporotic trabecular bone. In the present study, micro-FE models of osteoporotic and hormone-treated bone models were constructed to analyze the effect of specimen location and boundary condition on mechanical characteristics of hormone treatment model for osteoporotic trabecular bone. Top and bottom sections of specimens were also investigated individually to study the effect of specimen location. Hormone-treated models were allowed to have the same relative BV/TV (13.4％) as that used in models of previous researchers. The present study reported the elastic and plastic characteristics of the osteoporosis and hormone-treated bone models. In the present study, in-situ boundary condition was applied to the simulated compression tests for in-vivo condition of vertebral trabecular bone. The present study indicated that the hormone therapy was likely to improve the mechanical characteristics of osteoporotic bones and the mechanical characteristics of vertebral trabecular bone specimen were dependent on the captured location and boundary condition.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.1
• /
• pp.235-245
• /
• 2015

The aim of this study was to identify the significant factors for deciding yacht marina harbor location, and to use them for policy decision of a yacht marina project of local government. For this purpose, 2 top factors, 11 sub-factors and 50 specific factors were determined through a theoretical review and specialist interviews. This was followed by a questionnaire survey given to residents of Jeju and yacht tourists within the Jeju Special Self-Governing Province only. The results showed that marine safety is significant and the development must be made for local economic growth and by the participation of local residents.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.57 no.1
• /
• pp.25-33
• /
• 2008

This paper presents a new approach of a evaluation of location marginal prices(LMPs) considering demand response resources in the competitive electricity market. The stabilization of the electric power supply and demand balance has been one of the major important activities in electric power industry. Recently, much attention is paid to the demand-side resources which are responsive to incentives or time-varying prices and existing power system planning and operation activities are incorporated with the so-called demand response resources. In this paper, we first present an analytical method for calculation of LMPs considering demand response resources and then break down the LMPs into three components. In this study, we assume that Korean power system consists of two major regions, one which is the metropolitan and the other is non-metropolitan region. In the case study, we have considered several LMPs cases with different use of locational demand response resource and we can obtain a locational signal to demand response resources. Also, the economics of demand response resources are evaluated, compared with the increase of transmission line capacity and of generation capacity.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.2
• /
• pp.230-236
• /
• 2014

Superconducting fault current limiter (SFCL) has been expected as one of more effective solutions for decreasing fault current instantaneously and various types of SFCLs have been developed to apply into real power system. Recently, the application of the SFCL in a power distribution system has been reported to be contributed to the suppression of the voltage sag as well as the limitation of the fault current. However, the suppressing effect of voltage sag by the SFCL depends on component of its impedance and its application location in a power distribution system considering the recloser-recloser coordination. This paper analyzed the voltage sag caused by recloser-recloser coordination in a power distribution system and the suppression of the voltage sag due to the application location of the SFCL in a power distribution system was discussed through the PSCAD/EMTDC simulation.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.2
• /
• pp.7-14
• /
• 2015

This paper deals with an optimal determination process for the built-in location of localizer under restrictive siting area conditions of a domestic P-airport. Aerodynamic forces and moments acting on the localizer structure can be used a reference to find the safe distance from jet blast and the position at which the reasonable structural loading is applied. Wind tunnel experiment is conducted to measure aerodynamic loadings. The finite element analysis for structural deformation is employed to get the information of structural failure. A new localizer's position is determined by considering aerodynamic loading, structural strength and thermal loading due to jet blast. Deflector effect was also investigated in this study. In conclusion, the location of localizer can be placed at shorter than the current position and greatly decreased if the deflector is applied at the front of localizer.

• Journal of Korean Neurosurgical Society
• /
• v.41 no.1
• /
• pp.11-15
• /
• 2007

Objective : The authors attempted to confirm the risk factors for recurrent chronic subdural hematoma[CSDH] after simple burr-hole drainage. Methods : A total of 302 patients with CSDH who were treated at our hospital between January 1998 and May 2005 were studied. Various parameters considered for analysis of factors associated with CSDH recurrence; demographic and clinical findings [age, sex, history of seizures, diabetes, vascular diseases], initial and perioperative CT findings [hematoma density, location of catheter tip, post operative intracranial air, intracranial hematoma extension, hematoma width, hematoma site]. Results : Twenty-four patients [7.9%] experienced recurrence, whereas 278 patients [92.1%] did not. Five major risk factors should be considered : 1) layered type by hematoma density, 2) type I, II by location of catheter tip, 3) presence of postoperative intracranial air, 4) cranial base type of intracranial hematoma extension, 5) greater hematoma width. Conclusion : In this study, we report that the incidence of postoperative CSDH recurrence can be reduced by the examination of the hematoma characteristics on initial and perioperative CT findings and by preventing subdural air accumulation during operation. In addition, the location of the catheter tip can be used as a helpful factor in reducing the recurrence.