• Journal of dental hygiene science
• /
• v.16 no.2
• /
• pp.118-126
• /
• 2016

This study collected opinions about the design and management of toothbrushing facilities from schoolteachers and the people in charge of public centers, through a focus group interview (FGI), for the development of guidelines. Four moderators conducted eight FGIs of 32 subjects in charge of toothbrushing facilities across all the regions. The qualitative data was analyzed by constant comparative analysis. The findings indicated that more students utilized the facility and brushed their teeth after the installation of toothbrushing facilities. To enhance students' accessibility and safety, guidelines for design and management guidelinesfor toothbrushing facilities need to be developed; the location, sink height and depth, drain size, etc. should be comprehensively considered in the development of the guidelines. This study can help to improve students' satisfaction by enhancing the accessibility, safety, and functionality of toothbrushing facilities, and by providing fundamental data for toothbrushing facilities' development. Finally, this study can maximize the effects of management of toothbrushing facilities management on the improvement of students' oral health and behaviors.

• Journal of Radiation Protection and Research
• /
• v.7 no.1
• /
• pp.34-48
• /
• 1982

The prime purpose of this study is to realize an index quantity, absorbed dose index, defined by the ICRU for the characterization of ambient radiation level at any location for the purpose of radiation protection. The experiment has been designed to be carried out in two phases, namely, preliminary and main experiment. In the primary study a 30cm diameter sphere of polyethylene was used, while in the main experiment that of tissue equivalent material was fabricated and used. Both experiments were performed in the gamma-ray fields of $^{137}Cs\;and\;^{60}Co$, and in a neutron beam of thermal column of the TRIGA MARK-II research reactor. In the measurement of gamma-ray absorbed dose TLD-700 $(^{7}LiF)$ chips were used, and for the neutron dose both Au activation foils and TLD chips (TLD-600 $(^{6}LiF)$ and TLD-700 for the discrimination of gamma-ray contribution) were used. Theoretical assessment of the absorbed dose in the sphere phantom has been carried out in accordance with the Ehrlich's idea that deduced on the basis of Burlin's cavity theory in the case of gamma-ray irradiation. For the analysis of neutron dose fluence-KERMA rate conversion method was used. The explanation on the dose assessment is given in detail. Results obtained were numerically and statistically analyzed and the depth dose distributions are presented in the graphic forms with normalized values. In the concluding remarks, the possibility and difficulty of realizing the index quantity, including questions and problems to be solved are mentioned.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.69-75
• /
• 2015

Purpose: The gonad shielding is used to minimize the impact of the exposure to gonads when Abdomen, Pevis and Hip X-ray inspections are conducted on radiation impressionable pediatric patients. By the way, the gonad is palpable difficult and impossible to check visually because it's a sensitive area, so tests are conducted with the approximate location of shielding, thereby appearing problems of not shielding gonads accurately. Accordingly, this study produced shields by age and gender of pediatric patients and studied the method of positioning shields with ASIS as a reference point without palpable sensitive areas, and tried to evaluate its usability. Materials and methods: The study surveyed 30 pediatric patients by gender and age, who came and got inspected in Department of Radiology, our hospital from February 2012 to January 2014 and obtained the value of tolerance by measuring the average size of the pelvis using the distance measurement function of Infinitt Piview with the images stored in the PACS and producing shields by age and gender of pediatric patients and specifying the areas at random for the comparative analysis of pre- and post-using. It calculated the technology statistics($mean{\pm}SD$) with the value of tolerance measured the length using SPSS 12.0 statistical program. Results: As for boys, differences in the tolerance range of pre- and post-using shields were 2.69 mm in case of 1 year old, 2.58 mm in 2 years, 2.37 mm in 3 years, 2.815 mm in 4~5 years, 2.043 mm in 7~10 years, and as for girls, 1.92 mm in 1~2 years, 1.75 mm in 3~4 years, 2.52 mm in 5~6 years and 1.93 mm in 7~10. After analyzing the pre- and post-using shields for all of boys and girls, there were statistically significant differences(P<0.050). Conclusions: It is considered that we can minimize the exposure to gonads and get a better video for diagnosis in testing high biological impressionable pediatric, if we use shields correctly with ASIS as a reference point considering its shape and size by age and gender in Abdomen, Pevis and Hip X-ray inspections.

• Journal of Korea Port Economic Association
• /
• v.34 no.4
• /
• pp.69-84
• /
• 2018

The purpose of this study is to provide a comparative evaluation of container port criteria at four major container ports in the Bay of Bengal, including Colombo Port in Sri Lanka, Chennai Port in India, Chittagong Port in Bangladesh and Yangon Port in Myanmar. Important container port selection criteria are identified and comparisons among container ports are made using previous studies, personal interviews and questionnaires, completed by top shipping companies, freight forwarders, logistics service providers, and experts in Myanmar. The AHP method is used to verify the research model and hypothesis. This study identified five main criteria and eleven sub-criteria when choosing potential regional hub ports among the four ports in the Bay of Bengal. The main findings from the five main criteria suggest that port efficiency is the highest priority criteria, and the second priority is port costs. The criteria of geographical location and available port facilities are the third and fourth most important, respectively, and the last priority is port's hinterland. Regarding the relative competition among these ports, Colombo Port obtained the highest priority among the four influential factors except for port hinterland. This study has certain limitations that will require future research. First, the sample group for the population size is relatively small. Second, interviewees had limited experience answering questionnaires using this methodology and a limited amount of time was available for respondents for the interviews.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.6
• /
• pp.721-731
• /
• 2019

Air drying depends on species, density, dimension of wood, the geographical location of the air drying yard, and the meteorological factors of air drying site. If there are four seasons with large difference in temperature and humidity like in Korea, the research of the meteorological factors is required in air drying site. In this study, effective air drying days (EADD) of 24 regions in Korea were calculated by using the average monthly temperature, relative humidity, and wind speed. The EADD in 24 regions in Korea was ranged from 239 days to 291 days, with an average 265 days. This result is 5 days increased compared to the average of EADD calculated using the meteorological factors from 1955 to 1984. The results of multiple regression analysis on the EADD and meteorological factors showed that EADD affected in the order of temperature, relative humidity, and wind speed. As a result of dividing Korea into 4 zones of EADD, the zones of EADD were moved northward compared to previous study due to global warming. As basic data for predicting the moisture content (MC) distribution of Korean red pine logs during air drying conducted in Seoul, the average monthly temperature, relative humidity and wind speed for three years from 2016 to 2018 were presented, and the corresponding changes of the equilibrium MC were analyzed.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.10a
• /
• pp.83-83
• /
• 2019

본 연구는 고품질 산양삼 생산을 위한 표준재배기술 개발을 위해 산양삼의 생육특성과 재배지의 입지환경 간의 상관관계를 구명하고자 하였다. 전국 9지역의 산양삼 재배지를 선정하여 13년생 산양삼의 생육특성을 조사하고, 각 재배지의 임상 및 토양 이화학성을 분석하여 입지환경과 산양삼 생육특성과의 상관관계를 확인하였다. 총 9개의 재배지 중에서 산양삼의 생육특성은 거창과 함양 재배지에서 다른 재배지에 비해 유의적으로 높은 것으로 나타났다. 임산과의 상관관계를 확인한 결과, 산양삼의 부피는 재배지 임상의 흉고직경과 유의적인 정의 상관관계를 보였고, 활엽수의 비율과 유의적인 부의 상관관계, 침엽수의 비율과는 유의적인 정의 상관관계를 보였다. 침엽수의 비율이 100%로 확인된 영월 재배지의 산양삼 생육특성이 다른 재배지에 비해 유의적으로 높지 않은 것으로 확인되어, 이러한 결과는 침활혼효림에서 침엽수의 비율과 상관관계가 있는 것으로 판단된다. 토양 특성과의 상관관계 분석에서는 재배지 토양의 pH, K, Ca, Mg과 생육특성 간의 유의적인 부의 상관관계를 확인할 수 있었다. 이와 같이 산양삼의 생육특성과 입지환경 간의 상관관계를 분석한 결과, 산양삼의 생육은 재배지 임상의 흉고직경이 크고, 침활혼효림에서 침엽수의 비율이 높으며, 토양의 pH, K, Ca, Mg 함량이 높지 않은 재배지에서 적합하다는 것을 확인할 수 있었다. 본 연구의 결과를 통해 산양삼 재배에 적합한 재배적지의 입지환경 조건을 확인할 수 있었고, 산양삼은 7~20년 동안 무농약, 무비료의 청정환경에서 생산하는 것이 원칙이기 때문에 본 연구의 결과를 활용하여 향후 산양삼의 예상재배지를 선정하는데 있어 도움을 줄 수 있을 것으로 사료된다.

• Food Science and Preservation
• /
• v.17 no.5
• /
• pp.571-580
• /
• 2010

We sought to define the main motivational factors promoting consumption of Prunus mume products. We surveyed both specialized high-volume consumers and public consumers, and focused on consumption of and preferences for Prunus mume and Prunus mume products. We investigated how products were preferentially consumed, purchase experience, purchase location, purchase price, consumption experience, factors important in a purchase decision, preference factors, dissatisfaction factors, consumption outlook, comments on new processed foods, and activation of consumption. A total of 534 responses were received and data were analyzed using the SAS program (Version 9.1) of the Frequency test; Chi-square test was used to detect significant factors. A greater percentage of high-volume(compared with low-volume) consumers processed personal products at home. The public consumer tended to buy commercial products. However, public consumers who were older, who had higher incomes, and who were heads of households, tended to both buy commercial products and to prepare foods at home. The common purchase methods used by high-volume consumers were internet and direct marketing, but the public consumer frequented department stores and hypermarkets. High-volume consumers observed that commercial products were expensive, and such consumers seemed to be particularly cost-sensitive. The decisive factor triggering purchase decisions in high-volume consumers was the geographical origin of the fruit, whereas the public consumer was more concerned with taste. In public, positive factors were that the product was good for health and had a pleasant taste. Some of those surveyed complained of a lack of variety in Prunus mume products and that the amount of Prunus mume in certain products was low. To promote and increase consumption, convenient-to-eat products with healthy images are needed.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.637-642
• /
• 2021

Kidney stones are largely classified into kidney stones, ureter stones, and urolithiasis depending on the location of their occurrence. Therefore, in this study, from January 2019 to June 2021, kidney stones found in 112 patients with flank pain or who visited for abdominal ultrasonography at a general hospital located in Daegu were diagnosed with urolithiasis. We wanted to investigate the effect on twinkling artifacts. As a result of the study, the incidence of twinkling artifacts due to kidney stones was relatively high in the longitudinal scan among the scan methods. As the number of kidney stones increased, the incidence of twinkling artifacts increased by 1.296 times (p<0.05). As the kidney stone size increased, the incidence of twinkling artifacts increased by 0.086-fold (p<0.05). It was found that the number and size of kidney stones are factors affecting twinkling artifacts. Since the effect of kidney stones on twinkling artifacts is related to the number and size of kidney stones, continuous attention should be paid to helping the detection of kidney stones by using variables affecting twinkling artifacts.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.27 no.5
• /
• pp.683-690
• /
• 2021

The ventilation system of the engine room of a ship is generally installed to supply the combustion air necessary for the internal combustion engine and to remove the heat source generated in the engine room, and it must satisfy the international standard (ISO 8861) for the design conditions and calculation standards for the ventilation of the ship engine room. The response delay of the ventilation system including the fire detector is affected by the airflow formed inside the area and the location of the fire detector. In this study, to improve the initial fire detection response speed of a fire detector installed on a fishing vessel and to maintain the sensitivity of the installed detector, the smoke behavior was simulated using the air flow field inside the engine room, the amount of combustion air in the internal combustion engine, and the internal pressure of the engine room as variables. Analysis of the simulation results showed that reducing the flow rate in the air flow field and increasing the vortex by reducing the internal pressure of the engine room and installing a smoke curtain would accelerate the rise of the ceiling of the smoke component and improve the smoke detector response speed and ventilation system.

• Journal of the Korea Convergence Society
• /
• v.12 no.12
• /
• pp.315-322
• /
• 2021

This study analyzes the Required Safe Egress Time (RSET), in the event of a fire at a welfare center for the disabled, using the emergency passage according to the floor arrangement of users to evaluate the safety and the difference in RSET for each emergency passage using the Pathfinder simulation program to suggest an efficient evacuation method. As a result of RSET, it was found that there is no problem in evacuation safety for the current state of the facility's personnel allocation by satisfying the standard RSET in case of fire, and evacuation can be completed safely by evacuating through stairs rather than using elevators if possible. It is necessary for employees to be provided sufficient education and training in advance so that they can evacuate effectively with the disabled in case of fire. This study gives significance in saving many precious lives and safely evacuate in case of fire as evacuation routes were secured through the design, construction and operation of facilities for the disabled and the RSET was shortened through regular evacuation practices. It is necessary to discuss the further RSET studies based on the automatic fire shutters open or not when a fire occurs at a specific location following the installation of automatic fire shutter at the entrance of each floor of the facilities.