• ETRI Journal
• /
• 제38권3호
• /
• pp.560-567
• /
• 2016

To solve the problem of parameter optimization in image sensor-based visible light positioning systems, theoretical limits for both the location and the azimuth angle of the image sensor receiver (ISR) are calculated. In the case of a typical indoor scenario, maximum likelihood estimations for both the location and the azimuth angle of the ISR are first deduced. The Cramer-Rao Lower Bound (CRLB) is then derived, under the condition that the observation values of the image points are affected by white Gaussian noise. For typical parameters of LEDs and image sensors, simulation results show that accurate estimates for both the location and azimuth angle can be achieved, with positioning errors usually on the order of centimeters and azimuth angle errors being less than $1^{\circ}$. The estimation accuracy depends on the focal length of the lens and on the pixel size and frame rate of the ISR, as well as on the number of transmitters used.

• 대한기계학회논문집A
• /
• 제24권10호
• /
• pp.2487-2495
• /
• 2000

The acoustic characteristics of expansion chamber will be changed with the variation of inlet/outlet location due to the higher order acoustic mode in a high frequency in which the plane wave theory is not available. In this paper, the acoustic performance of reactive type expansion chamber with circular cross-section is analyzed by using the modified mode matching theory. The sensitivity analysis of four-pole parameters with respect to the location of inlet and outlet is also suggested to increase the acoustic performance. The acoustic power transmission coefficient is used as cost function, and the location of inlet and outlet is used as design variables. The steepest descent method and SUMT algorithm are used for optimization technique. Several results showed that the expansion chamber with optimally located inlet/outlet had better acoustic performance than concentric expansion chamber.

• Wind and Structures
• /
• 제20권4호
• /
• pp.489-508
• /
• 2015

In this paper, a novel methodology is proposed to obtain optimum location of outriggers. The method utilizes genetic algorithm (GA) for shape and size optimization of outrigger-braced tall structures. In spite of previous studies (simplified methods), current study is based on exact modeling of the structure in a computer program developed on Matlab in conjunction with OpenSees. In addition to that, exact wind loading distribution is calculated in accordance with ASCE 7-10. This is novel since in previous studies wind loading distributions were assumed to be uniform or triangular. Also, a new penalty coefficient is proposed which is suitable for optimization of tall buildings. Newly proposed penalty coefficient improves the performance of GA and results in a faster convergence. Optimum location and number of outriggers is investigated. Also, contribution of factors like central core and outrigger rigidity is assessed by analyzing several design examples. According to the results of analysis, exact wind load distribution and modeling of all structural elements, yields optimum designs which are in contrast of simplified methods results. For taller frames significant increase of wind pressure changes the optimum location of outriggers obtained by simplified methods. Ratio of optimum location to the height of the structure for minimizing weight and satisfying serviceability constraints is not a fixed value. Ratio highly depends on height of the structure, core and outriggers stiffness and lateral wind loading distribution.

• 한국소음진동공학회논문집
• /
• 제26권5호
• /
• pp.609-615
• /
• 2016

Measuring similarity between two signals is a key element of the location template matching (LTM) method which is one of impact source localization technique. As a measure of similarity, the correlation coefficient is most widely used, and the group delay based method is recently proposed to improve the accuracy of finding the impact source. In practice, the LTM method assumes that the similarity between two signals decreases as the distance between two corresponding impact points increases, where the distance between two neighboring impact points defines the grid spacing. In this paper, it is shown that this assumption is not always true but the correlation coefficients fluctuate forming a main robe and many side robes as the distance between two neighboring impact points increases. On the other hand, the standard deviation of group delay sharply increases with a small increase of the grid spacing. These are demonstrated by using a simple cantilever beam. Based on these findings, an optimal way of implementing the LTM method may be suggested by combining the correlation coefficient and the group delay based approaches.

• Smart Structures and Systems
• /
• 제18권5호
• /
• pp.1063-1085
• /
• 2016

Taking advantage of the high sensitivity and long-distance detection capability of acoustic emission (AE) technique, this paper focuses on the crack detection in rail head, which is one of the most vulnerable parts of rail track. The AE source location and noise cancellation were studied on the basis of practical rail profile, material and operational noise. In order to simulate the actual AE events of rail head cracks, field tests were carried out to acquire the AE waves induced by pencil lead break (PLB) and operational noise of the railway system. Wavelet transform (WT) was first utilized to investigate the time-frequency characteristics and dispersion phenomena of AE waves. Here, the optimal mother wavelet was selected by minimizing the Shannon entropy of wavelet coefficients. Regarding the obvious dispersion of AE waves propagating along the rail head and the high operational noise, the wavelet transform-based modal analysis location (WTMAL) method was then proposed to locate the AE sources (i.e. simulated cracks) respectively for the PLB-induced AE signals with and without operational noise. For those AE signals inundated with operational noise, the Hilbert transform (HT)-based noise cancellation method was employed to improve the signal-to-noise ratio (SNR). Finally, the experimental results demonstrated that the proposed crack detection strategy could locate PLB-simulated AE sources effectively in the rail head even at high operational noise level, highlighting its potential for field application.

• 정보처리학회논문지C
• /
• 제10C권1호
• /
• pp.103-110
• /
• 2003

본 논문에서는 호의 도착을 고려한 거리기준 위치등록 방식을 제안하고 성능을 평가하였다. 이를 위해 이동성 모형을 제시하고, 이를 이용하여 제안한 방식의 성능을 분석하였다. 분석 결과 거리기준 위치등록 방식은 영역기준 위치등록 방식에 비하여 위치등록이 자주 발생하지만 위치등록 부하가 위치영역 내 모든 셀에 분산된다. 반면에 호의 도착을 고려한 거리기준 위치등록 방식의 위치등록 부하는 영역기준 위치등록 방식과 비슷한 수준이면서도 위치등록 부하가 위치영역 내 모든 셀에 분산되기 때문에 한정된 무선자원을 효율적으로 사용할 수 있다.

• 한국정보과학회논문지:컴퓨팅의 실제 및 레터
• /
• 제14권3호
• /
• pp.266-270
• /
• 2008

블루투스(Bluetooth)는 별도의 기반 인증 시설없이 각 디바이스간의 독립적인 인증과정을 통해 데이타를 서로 전송하는 기술을 사용하고 있다. 이러한 특징 때문에 이전에 기반 인중시설을 이용하는 네트워크에서는 발생하지 않았던 취약점들이 발생할 수 있으며, 가장 대표적인 문제가 위치 추적 공격이다. 따라서 본 논문에서는 디바이스 위치추적공격에 대해 살펴보고 그에 대한 해결책으로 익명모드를 제안한다. 제안된 방법은 발생 가능한 공격시나리오에 대해 분석하고 성능을 평가하였으며, 이를 통해, 기존 방법에 비해 수행 시간과 메모리 소비 측면에서 큰 차이를 보이지 않으면서도 위치 추적 공격에 대해 더 강인하게 동작함을 보였다.

• 한국공간정보시스템학회 논문지
• /
• 제12권1호
• /
• pp.1-9
• /
• 2010

최근, 무선 센서 네트워크 기술은 유비쿼터스 컴퓨팅 시대의 핵심 기반 기술의 하나로 인식되고 있다. 센서 노드는 제한된 배터리 용량을 가지기 때문에, 장기간 생존하기 위해서 노드들의 동작에 적은 에너지를 소모해야한다. 따라서, 에너지를 효율적으로 사용하는 프로토콜이 필수적이다. 이를 위해 본 논문 에서는 에너지 사용량을 고려하여 에너지 소모가 적은 경로를 설정하는 위치 기반의 에너지 효율적인 라우팅 프로토콜을 제안한다. 아울러 메시지 전송이 원활하지 못한 경우를 처리하는 경로 재설정 알고리즘을 제안한다. 마지막으로 TOSSIM을 이용한 성능평가를 통해, 제안한 프로토콜이 에너지 효율성 측면에서 기존 위치기반 라우팅 프로토콜 보다 우수함을 보인다.

• 반도체디스플레이기술학회지
• /
• 제11권4호
• /
• pp.37-42
• /
• 2012

Nanoimprint lithography (NIL) has attracted broad interest as a low cost method to define nanometer scale patterns in recent years. A major disadvantage of thermal NIL is the thermal cycle, that is, heating over glass transition temperature and then cooling below it, which requires a significant amount of processing time and limits the throughput. One of the methods to overcome this disadvantage is to improve the cooling performance in NIL process. In this paper, the performance of the cooling system of thermal NIL is numerically investigated by SolidWorks Flow Simulation program. The calculated temperatures of nanoimprint device were verified by the measurements. By using the analysis model, the effects of the change of flow velocity and cooler location on the cooling performance are investigated. For the 6 cases (0.1 m/s, 0.5 m/s, 1 m/s, 3 m/s, 5 m/s, 10 m/s) of flow velocity and for the 6 cases of distances (50 mm, 40 mm, 30 mm, 20 mm, 10 mm, 1 mm) of cooler location, the heat conjugated flow analyses are performed and discussed.

• 전기학회논문지
• /
• 제64권3호
• /
• pp.357-364
• /
• 2015

The power system configuration is changed to solve increasing power demand. This changes in power system configuration with mesh-, network grid generate the problem of fault current increase. Superconducting fault current limiter (SFCL) has been expected the one of the solutions to solve this problem. And there has already been reported much to the application and research of SFCL in the power distribution system. However, the application and research of SFCL are insufficient in a transmission power system. Also, the fault current limiting effect by the SFCL varies with installation location of SFCL. Therefore, this paper constructed the power transmission system through experiment and analyzed installation location method of SFCL using the current rate of each circuit breaker (CB) according to fault location.