• Journal of Industrial Technology
• /
• v.21 no.B
• /
• pp.257-263
• /
• 2001

Terminal paging is the process of determining the exact location of a particular mobile terminal. The paging cost is related to the number of paging cycles and the number of cells being polled by each cycle. In this paper, we first analyze the performance of various terminal paging strategies in terms of the number of polling cycles and the number of polling signals. Then we present a paging scheme which combines Shortest-Distance-First with movement history list. Simulation results show that the proposed paging scheme reduces the number of polling signals as well as the number of polling cycles.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10a
• /
• pp.399-404
• /
• 1998

Analysis of partially prestressed beams in which cracking under service loads is allowed requires a knowledge of geometric cross section properties such as neutral axis, centroid, area and moment of initia of this cracked transformed section. Especially an exact calculation for the stresses of steel and concrete and the width of crack and the amount of deflection can be obtained with accrurate prediction of neutral of centroidal axis location. In this paper, the procedures for predicting the centroidal axis location of partially cracked prestressed concrete members, using the compatibility of deformation of concrete and steel are formulated and compared with Dilger`s computed results. And also the computed results according to this paper are compared with Branson`s experimental results.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.12 no.9
• /
• pp.802-809
• /
• 2000

This study numerically analyzes the thermal and flow characteristics inside the header in PFHE(parallel-flow heat exchanger) by employing a three-dimensional turbulence modeling. The following quantities are examined by varying the injection angle of the working fluid, the location of entrance and the shape of entrance: flow nonuniformity, heat transfer rate, and flow distribution in each passage. The result shows that the degree of significance among the parameters affecting the header part is in the order of the injection angle, the shape of entrance, and the location of entrance. The result also indicates that heat transfer rates compared to the reference model are increased by about 152% for the angle of injection of -$20^{\circ}C$, by about 127% for the shape of entrance with right and left long rectangular form, and by about 108% for the location of entrance located at the lowest Position.

• Convergence Security Journal
• /
• v.10 no.2
• /
• pp.11-17
• /
• 2010

Recent technological advances allow us to envision a future where large numbers of low-power, inexpensive sensor devices are densely embedded in the physical environment, operating together in a wireless network. This paper considers localization for mobile sensors; localization must be invoked periodically to enable the sensors to track their location. Localizing more frequently allows the sensors to more accurately track their location in the presence of mobility. In this paper, we test and analyze the accuracy of a moving node localization by Received Signal Strength (RSS).

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.213-213
• /
• 2009

In this paper, we investigated the current limiting characteristics due to the application location of the superconducting fault current limiter (SFCL) such as the feeder, the bus, the secondary side of transformer in a power distribution system. In addition, the quench and the recovery characteristics of the SFCL installed in each location of the power distribution system were compared each other. Through the analysis, in case that the SFCL was applied into the feeder line, its current limiting and voltage-drop compensating characteristics were confirmed to be the more effective. On the other hand, the power burden of the SFCL was increased higher compared to the SFCL'S other application location.

• Journal of Korean Institute of Industrial Engineers
• /
• v.25 no.3
• /
• pp.321-329
• /
• 1999

An efficient location management for mobile stations plays an important role in mobile communication network. This paper studies a movement-based registration(MBR) method with a selective paging scheme. In the movement-based registration method, a mobile station performs a location registration when the number of cell boundary crossings since the last registration equals to the given movement threshold. In the selective paging scheme, the network first partitions the location area of the called mobile station into a number of subareas and then pages each subarea one after another until the MS is found. To reduce the paging and registration load, we propose a modified MBR(MMBR) method in the aspect of minimization of signaling traffic on radio channels. First, we propose a new establishment of the paging area to reduce the paging load on radio channels and then analyze its effects. Next, we propose the MMBR to reduce the registration load. Numerical results show that our proposed movement-based registration provides the better performance compared with the conventional method.

• Proceedings of the Korea Society of Information Technology Applications Conference
• /
• 2005.11a
• /
• pp.27-30
• /
• 2005

Because of unreplenishable power resources, reducing node energy consumption to extend network lifetime is an important requirement in wireless sensor networks. In addition both path length and path cost are important metrics affecting sensor lifetime. We propose a dynamic clustering scheme based on location in wireless sensor networks. Our scheme can localize the effects of route failures, reduce control traffic overhead, and thus enhance the reachability to the destination. We have evaluated the performance of our clustering scheme through a simulation and analysis. We provide simulation results showing a good performance in terms of approximation ratios.

• Journal of Electrical Engineering and Technology
• /
• v.2 no.4
• /
• pp.434-440
• /
• 2007

This paper proposes a fault location algorithm for double-circuit transmission lines in the case of single line-to-ground fault. The proposed algorithm requires the voltage and current from the sending end of the transmission line. The fault distance is simply determined by solving a second order polynomial equation which is achieved directly by the analysis of the circuit. In order to testify the performance of the proposed algorithm, several other conventional approaches have been taken out to compare with it. The test results corroborate its superior effectiveness.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.684-688
• /
• 1998

Optimization of the collocated piezoceramic sensor/actuator placement is investigated numerically and verified experimentally for vibration control of laminated composite plates. The finite element method is used for the analysis of dynamic characteristics of the laminated composite plates with the piezoceramic sensor/actuator. The structural damping index(SDI) is defined from the modal damping. It is chosen as the objective function for optimization. Weights for each vibrational mode are taken into account in the SDI calculation. The gradient method is used for the optimization. Optimum location of the piezoceramic sensor/actuator is determined by maximizing tie SDI. Numerical simulation and experimental results show that the optimum location of the piezoceramic sensor/actuator is dependent upon the outer layer fiber orientations of the plate, and location and size of the piezoceramic sensor/actuator.

• Proceedings of the Korea Contents Association Conference
• /
• 2003.05a
• /
• pp.449-453
• /
• 2003

In this paper, we evaluate the performance of zone-based registration, distance-based registration and distance-based registration considering call arrival. We propose the mobility model, which can be used to analyze the performance of three registration schemes. Numerical results show that zone-based registration needs less number of registration than distance-based registration. On the other hand, the registration load of the distance-based registration is equally distributed to all cells in a location area. However, the registration load of the distance-based registration considering call arrival is similar to that of zone-based registration and equally distributed to all cells in a location am Therefore, the proposed scheme can be effectively used restricted radio resources.