• Structural Engineering and Mechanics
• /
• v.46 no.1
• /
• pp.39-51
• /
• 2013

An extremum method is presented to predict the wrinkling characteristics of the inflated cone in bending. The wrinkling factor is firstly defined so as to obtain the wrinkling condition. The initial wrinkling location is then determined by searching the maximum of the wrinkling factor. The critical wrinkling load is finally obtained by determining the ratio of the wrinkling moment versus the initial wrinkling location. The extremum method is proposed based on the assumption of membrane material of beam wall, and it is extended to consider beam wall with thin-shell material in the end. The nondimensional analyses show that the initial wrinkling location is closely related to the taper ratio. When the taper ratio is higher than the critical value, the initial wrinkles will be initiated at a different location. The nondimensional critical wrinkling load nonlinearly increases as the taper ratio increases firstly, and then linearly increases after the critical taper ratio. The critical taper ratio reflects the highest load-carrying efficiency of the inflated cone in bending, and it can be regarded as a measure to optimize the geometry of the inflated cone. The comparative analysis shows fairly good agreement between analytical and numerical results. Over the whole range of the comparison, the mean differences are lower than 3%. This gives confidence to use extremum method for bending-wrinkling analysis of inflated conical cantilever beam.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.35 no.3
• /
• pp.92-104
• /
• 2007

This paper aims to discussion the characteristics of location and spatial organization on Hongneung and Yureung(royal tomb) in Namyangju through the interpretation of traditional oriental philosophy including Feng-Shui theory. To do this, we studied in two ways; analysis of the present conditions and photographing research materials about the form of physical structure and review of historical document. The result of analysis in sight of the location and spatial structure was good matched. Main finding of this paper are as follows: The location and landscape structure was characterized by the harmony with natural following traditional thinking and the Korean view of nature, while maintaining the dignity of the King. The spatial organization were placed in a straight line following the hierarchy of metaphysics by order of Neungchim(Tombs Vicinity) - Changmyungdeung(Stone Lantern) - Chungjakak(Pavilion) - Hongsalmun(Gate for Heavenly Gods) and was based on the Confucianism value, the natural contour and inner value. Through this study, we find the principles made it possibles to re-evaluate nature in modem society and provided us with new ways to conserve nature with the help of environmental theory.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.51 no.1
• /
• pp.5-14
• /
• 2002

In this paper, we analyze inductive interference in conductive material around 345 kV power transmission line, and evaluate the effects of mitigation wires. Finite element method (FEM) is used to numerically compute induced eddy currents as well as magnetic fields around powder transmission lines. In the analysis model, geometries and electrical properties of various elements such as power transmission line, buried pipe lines, overhead ground wire, and conducting earth are taken into accounts. The calculation shows that mitigation wire reduces fairly good amount of eddy currents in buried pipe line. To find the optimum magnetic field shielding location of mitigation wire, we applied evolution strategy algorithm, a kind of stochastic approach, to the analysis model. Finally, it was shown that we can find more effective shielding effects with optimum location of one mitigation wire than with arbitrary location of multi-mitigation wires around the buried pipe lines.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.41 no.6
• /
• pp.47-53
• /
• 2004

This paper proposes an algerian for determining robot location using appearance-based paradigm. First, this algorithm compresses the image set using Principal Component Analysis(PCA) to obtain a low-dimensional subspace, called the eigenspace, and it makes a manifold that represent a continuous-appearance function. Neural network is employed to estimate the location of the mobile robot from the coefficients of the eigenspace. Then, Kalman filtering scheme is used for the fine estimation of the robot location. The algorithm has been implemented and tested on a mobile robot system. It is shown that the robot location is estimated accurately in several trials.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.175-179
• /
• 2010

This study was to evaluate of installation location and management problem for a closed circuit television according to the present situation and installation environment when the CCTV doesn't take a location, surrounding environment, mechanical function in the campus. This methodology used network analysis, mechanical characterization and Streetlight illuminance. As a result, we confirmed in Kyung-Buk National University that was problem of unrelated location of walk pattern in students, a short of illuminance location, only 25 CCTV can be used to crime prevention of student in the night but, the other one is need to some improvement under 44 CCTV.

• Journal of the Korean Institute of Rural Architecture
• /
• v.9 no.2
• /
• pp.1-12
• /
• 2007

TV-Drama Location sets as a potential magnet for tourism have been a popular subject during the past years. A large number of provincial governments have been trying to attract location sets to their region for this cause. But so far the drama sets, once they lost the heat of the initial exposure, have not been used continuously and thus result in waste of province budget. Systematic approach to the utilization and effective application is needed. On the basis of analyzing the issues and problems of existing TV drama sets, this study explores possibilities of development in the case of "Into the storm" drama set, locationed at Jukbyun, Uljin-gun. Through SWOT analysis, feasibility analysis, the study proposes sustainable scheme that accommodates potential for future drama, tourist attraction and functions for local residents.

• Journal of the Korean Society of Physical Medicine
• /
• v.10 no.3
• /
• pp.73-79
• /
• 2015

PURPOSE: This study aims to examine the impact of the location of a walker-aid pocket that is attached to the walker while walking. METHODS: The research subjects included 10 male adults and 10 elderly people. The subjects used a two-wheeled walker for the walking analysis, and a firm velcro-type pocket that can be attached to the walker aid was used for weight loading. The size of the external loads was set at 2kg, which corresponds to approximately 2.5% of the mean body weight of the subjects. The pocket was attached to the left, center, and right sides of the walker aid. Stride length, stride, step width, and time were investigated according to the location change. RESULTS: No statistical differences were observed in all the walking factors among the adults and elderly people regardless of the changes in the location of the walker pocket. In cases of no weight and the 2kg walker pocket, stride length and strides were longer for the adults, while the step width was greater and walking time was longer for the elderly people. CONCLUSION: The weight of the walker pocket turn out to retard walking speed, although the location of the walker pocket is not affect walking with the walker-aid.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.55-61
• /
• 2005

The purpose of this study is to investigate the effect of circumferential location of local wall thinning defect on the collapse behavior of an elbow. Thus, the present study conducts three-dimensional finite element analysis on the 90-degree elbow containing a local wall thinning at intrados, crown and extrados of bend region and evaluates the collapse moment of wall thinned elbow under various thinning shapes and loading conditions. Combined internal pressure and bending moment are considered as an applied load. The internal pressure of $0\~20MPa$ and both closing and opening mode bending are employed. The results of analysis show that the reduction in collapse moment of the elbow by local wall thinning is more significant for a defect locating at crown than for a defect locating at intrados or at extrados. Also, the effect of internal pressure on the collapse moment of wall thinned elbow depends on the circumferential location of thinning defect and applied bending mode.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.20 no.6
• /
• pp.38-45
• /
• 2016

A study was conducted on the effect of leading edge location for the performance characteristics of a centrifugal compressor impeller. Five impellers with different leading edge location were selected for numerical analysis. The impeller with leading edge located 10% away from the inlet about meridional distance from entrance to exit showed the best total pressure ratio and efficiency. Also, this case showed relatively uniform flow distribution because of a weak intensity of the separation region at impeller exit. The impeller with leading edge located far from this location showed lowest total pressure ratio and efficiency. Performance of compressor also decreased due to non-uniform flow distribution at impeller exit.

• Journal of the Korea Safety Management & Science
• /
• v.17 no.4
• /
• pp.287-295
• /
• 2015

modern logistics are required to carry out functions such as timely adjustment and swift adaptation to changing patterns, and this leads to the emphasis on forming logistics parks. Logistics parks make profits using the efficiency of time and space. Such logistics parks play an important role in a corporation creating operating profits as well as acting as a method of alternative investment for individuals. Logistics parks no longer simply store materials, but have become a place that plays an important role in various areas of corporate and individual activities, and thus the analysis of the selection of the location of logistics parks and the related characteristics is extremely important. There are many existing studies on the selection of locations of logistics parks but work on the factors related to location selection by industry seem lacking. As such, in the course of this study we have used preceeding studies to draft a questionnaire on which selection factors affect the selection of logistics park location in different industries and conducted empirical analysis of the questionnaire results to uncover the factors that affect the selection of the locations of logistics parks in different industries.