• Knowledge Management Research
• /
• v.18 no.1
• /
• pp.159-176
• /
• 2017

Recently, the popularity of smartphones has led to a dramatic increase in the frequency of use of App(Application) services. LBS (Location-Based Service) App service adopts various methods such as push marketing and useful information by region through providing location-based service based on the location of the consumer. In particular, an enterprise or an App management company can provide necessary information to the consumer through the necessary information among the customer related knowledge information obtained by utilizing the location information of the consumer in real time. Nevertheless, since LBS is a service that can be performed only when the company obtains consent to provide location information voluntarily by the consumer, there is a case of privacy infringement due to consumers' use of personal information. The purpose of this study is to identify the characteristics of privacy related variables and the knowledge structure for consumer value formation based on the theory of privacy calculation. We also compared the characteristics of Korea with those of China in privacy issue. As a result of the analysis, it was confirmed that factors such as information utilization ability and information control ability were influential as a key factor of privacy calculation. In addition, perceived value influences the reputation of the LBS App service.

• Journal of Biosystems Engineering
• /
• v.16 no.3
• /
• pp.211-218
• /
• 1991

In this study, the break of the rotary blade which is occured from a stress concentration of the inside of blade by the outside impulsive load, is analyzed to 3-dimension used by the Freezing Photoelastic Method. These results are as follows. 1. The bending and compression stress are the greatest at the location of blade case. 2. The section area of 3cm-location from the blade case is the smallest, therefore, there are breaked 58% of all at this location and are proofed to the most danger section 3. The section area which by stress concentration of 3cm-location from blade case is caused by the production of blade, and it was higher danger of break than another location's. 4. In the location of 6cm and 9cm from the blade case, the bending stress has received a little and the section area has larger than another's, so it is not almost possible that the break at that location 5. In order to prevent of break, the external part which has contacted soil have to made tender for receiving a little stress and the internal part which received a large stress have to strengthen.

• Journal of Korean Society of Rural Planning
• /
• v.27 no.3
• /
• pp.93-102
• /
• 2021

This study was attempted to provide a scientific basis for the problem of location selection by spatial scale for efficient promotion of projects related to green care farm complex. Location potential assessment system in local government scale consists of two major components from demand-side and supply-side consideration. The demand-side aspect considered the characteristics of potential users, while supply-side aspect used total 18 indices over 8 divisions under 3 fields. For the location potential assessment in district scale, total 8 indices under 3 major divisions were considered based on biological, physical, social, and economic environment. The application results of the location potential evaluation system in local government scale(excluding metropolitan cities) showed high location potential in southern Gyeonggi Province and near Busan Metropolitan City. As a result of applying the district-scale location potential evaluation system to Geumsan-gun, Geumsan-eup, Chubu-myeon, and Jewon-myeon have high potential. Further studies to improve the applicability of the developed indices are recommended by enhancing assessment indices, complementing base data, and reinforcing with spatial analysis.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.25 no.3
• /
• pp.143-155
• /
• 2023

This study examined the effect of beauty service location characteristics and service quality on customer satisfaction and revisit intention, and analyzed the gender control effect of location characteristics and service quality in the relationship with customer satisfaction. The Statistical Package for the Social Sciences (SPSS) was employed and analysis was conducted to investigate how location characteristics and service quality in beauty service encounters effects customer satisfaction. The results of this study are as follows. First, visibility, which is a location characteristic, was found to have a significant effect on customer satisfaction. Second, professionalism and convenience, which are service qualities, were found to have a significant impact on customer satisfaction. Third, customer satisfaction was found to have a significant effect on the intention to revisit. Fourth, as a result of analyzing the gender control effect in the relationship between location characteristics and service quality with customer satisfaction, the gender control effect was found in all factors.

• Journal of Korean Society of Rural Planning
• /
• v.23 no.4
• /
• pp.99-110
• /
• 2017

This study is to analyze the spatial structure and POE of Jungja(pavilion) shelter for rural village regeneration. 14 Jungja shelter space at rural villages in Gyungbuk province, were investigated. An interview questionnaire was conducted for total 139 residents as POE. The use behavior and satisfaction for Jungja shelter space, were investigated. The statistical analysis were mean of satisfactions, reliability, factor analysis, and multiple regression analysis. The results and discussions can be objective data for rural village regeneration. In satisfaction level, 'Continuous use intention'(3.99), 'Well-suited approach'(3.87), and 'Helpful in resident living'(3.84) were shown to be high points of agreement in 5 point Likert type scale. But, the mean points were low as 2.01 in 'Surrounding landscape', 'Creation of green areas'(3.22), and 'Traffic safety'(3.22), respectively. Within use satisfaction, 5 factors were categorized, 'Use', 'Safety', 'Facility', 'Management' and 'Users'. By the result of multiple regression analysis, variables of 'Continuous use', 'Convenient location', and 'Image improvement', were shown to be main affecting variables to overall satisfaction. Furthermore, in spatial structure analysis, 4 types were categorized with the aspect of landform, roads, and location in village. The levels of satisfaction were shown to be high in village type of semi-open, road type of circular, and location type of center/back. Conclusively, these findings could be utilized as basic data and useful tool of space-structural satisfaction analytic method, and for each stage of planning/design and remodeling for rural village regeneration.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.663-666
• /
• 2003

Using numerical analysis modeling of Multi-electrode Array that could be applied to the corrosion state measurement of a reinforcing steel bar in concrete, the steel bar location inside concrete can be probed by the investigation of the change of the measured impedance from concrete surface determined by the electrical impedance of interface between the steel bar and concrete, the electrical resistivity of concrete, the array of electrodes and the relative location and diameter of the steel bar.

• Journal of the Korean association of regional geographers
• /
• v.2 no.1
• /
• pp.69-85
• /
• 1996

This research adoptes a spatial analysis function of the Geographic Information System[GIS] to analyze the location and the service district of a collective consumption facility, to discover the optimal location, and to redefine the service district. The location and spatial district of a collective consumption facility strongly influences the quality of life of residents. This research studies administrative offices and districts, especially Gu-offices in Ulsan. Ulsan would be raised to the status of Kwangyokshi in 1997; so that, the status of four Gus would be changed from a general administration into a self-governing administration. The summary of this research focuses on five significant points. First, the districts of four Gus were strongly required to be redefined to obtain the maximization of the degree of potential development as well as of the efficiency and equity of administring services. The spatial range of residents in a Gu was not in accord with its administrative district. The administrative districts of four Gus in Ulsan were not balanced in terms of area and population, and the high degree of disparity among Gus existed the efficiency and equality of a collective consumption service. Second, the current gu-offices were located based on security of land and accessibility of a main route; so, there was difficult to find the creteria and the principles of selections of the location of Gu offices. The social disparity of an administrative service existed in the accessibility into Gu-offices. Third, the administrative districts of Gus were redefined with spatial analysis tool of ARC/INFO. It was recommended that Ulsan maintain four Gus under the condition of five Kwangyokshi in South Korea. The redefined districts of administration reduced the disparity among four Gus in terms of area and population. improved the degree of harmony between the spatial range of residents of Gus and the administrative district of Gus, and increased the efficiency and equity of administrative service. Fourth, within the redefined adminis trative district of a Gu, the centroid reduced the maximum distance and mean distance; so, the efficiency and equity of public service provided by the Gu-office were improved. Last, the spatial analysis function of GIS helped to select the optimal location and to delineate the district of public service with more speedly and objectively. The function of spatial analysis of GIS was very useful to minimize the conflict in the determination of the location of a collective consumption facility and of the service district. To improve location analysis with GIS. non-spatial data base such as budget, thought of residents, and development policy and program, should be constructed.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.488-493
• /
• 2011

Authors previously suggested the design sensitivity analysis based on transmissibility function and identified the sensitivity of measured point over the small modification of system dynamics. On the other hand, the acceleration data will not reveal the strain information at the same location and authors suggested energy isoclines that successfully predict the fatigue damage on the interesting location to overcome the drawback of acceleration over fatigue society. Both of methodologies, sensitivity analysis and fatigue damage prediction, commonly use the response acceleration response as main indicator. In this paper, authors investigate the advanced method of vibration fatigue prediction using design sensitivity analysis to enhance the accuracy of predicted accumulated fatigue. Uni-axial vibration testing is performed with finite element model of a simple notched specimen and the prediction of fatigue damage at notched location is conducted for accelerations at different measurement locations that show different sensitivity contribution, either.

• Journal of the Korean Society for Precision Engineering
• /
• v.15 no.3
• /
• pp.31-37
• /
• 1998

The structure of satellite consists of six parts which are control system, power system, thermal control system, remote measurement command system, propellant system and thrust system. In these parts, propellant system consists of propellant tank and thrust device. What we want to perform is optimum design to minimize the weight of propellant tank. In order to design optimal propellant tank, several parameters should be adopted from the tank geometry like the relative location of the lug and variation of the wall thickness. The analysis was executed by finite element analysis for finding optimal design parameters. The structure was divided into three parts consisting of the initial thickness zone, the transitional Bone, and the weak zone, whose effects on the pressure vessel strength was investigated. Finally the optimal lug location and the three zone thickness were obtained and the weight was compared with the uniform thickness vessel.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.926-939
• /
• 2022

The area of this study will cover the location-wise seismic response variation of an electrical cabinet in nuclear power point (NPP) based on classical reliability analysis. The location-based seismic ground motion (GM) selection is carried out with the help of probabilistic seismic hazard analysis using PSHRisktool, where the variation of reliability analysis can be understood from the relation between the reliability index and intensity measure. Two different approaches such as the first-order second moment method (FOSM) and Monte Carlo Simulation (MCS) are helped to evaluate and compare the reliability assessment of the cabinet. The cabinet is modeled with material uncertainty utilizing Steel01 as the material model and the fiber section modeling approach is considered to characterize the section's nonlinear reaction behavior. To verify the modal frequency, this study compares the FEM result with recorded data using Least-Squares Complex Exponential (LSCE) method from the impact hammer test. In spite of a few investigations, the main novelty of this study is to introduce the reader to check and compare the seismic reliability assessment variation in different seismic locations and for different earthquake levels. Alongside, the betterment can be found by comparing the result between two considered reliability estimation methods.