• The Journal of the Korea Contents Association
• /
• v.14 no.3
• /
• pp.33-39
• /
• 2014

Domestic and international researches, about intelligent systems based on a variety of location recognitions using location information, have actively proceeded. The representative location recognition method based on PTMP(Point To Multi Point) communication uses TOA(Time Of Arrival) to calculate distances to a fixed node that you want to recognize a position. The method is used to obtain the fixed node location information from three nodes location information that is applied by the triangulation method. There are disadvantages, an infrastructure should be established at a specific space and the system established cost is needed, in the location recognition method based on the PTMP communication, In this paper, the ranging based PTP(Point To Point) location recognition method is proposed to revise the disadvantage of PTMP location recognition method. And then it is compared with PTMP communication location recognition to evaluate performance. In this way, PTMP and PTP communication location recognition systems based on ranging were constructed and tested in an indoor environment. Experiment results show that the proposed PTP location recognition method could be confirmed to improve accuracy more than 3 times when it was compared with the existed PTMP location recognition method.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.4
• /
• pp.1-7
• /
• 2012

This paper proposes a new indoor location recognition system using a ZigBee network and a global positioning system(GPS). The proposed location recognition system applies GPS values that are mainly used for outdoor location recognition, to indoor location recognition; hence the techniques conventionally separated for the indoor and outdoor location recognition are integrated into one location recognition technique. The proposed system recognizes a location using the distance between nodes. Although the distance between nodes can be calculated by measuring the strength of the received ZigBee signals, generally the measured distance is not accurate and has high error rates since the strength of the ZigBee signals is different depending on the distance. In order to reduce the error rate, we have subdivided the output power of the received ZigBee signals into five levels. When a moving node generates a signal, each fixed node transmits the received signal strength and its own GPS information to other nodes, so the moving node can find its own accurate location in terms of the received signals.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.4
• /
• pp.57-61
• /
• 2019

Nowadays, portable digital cameras such as smart phone cameras are being popularly used for entertainment and visual information recording. Given a database of geo-tagged images, a visual location recognition system can determine the place depicted in a query photo. One of the most common visual location recognition approaches is the bag-of-words method where local image features are clustered into visual words. In this paper, we propose a new bag-of-words-based visual location recognition algorithm using time-series streetview database. The proposed algorithm selects only a small subset of image features which will be used in image retrieval process. By reducing the number of features to be used, the proposed algorithm can reduce the memory requirement of the image database and accelerate the retrieval process.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.65 no.4
• /
• pp.704-710
• /
• 2016

In this paper, we proposed pole position detection system for providing exact location information to users. The proposed system consists of pole recognition part and pole number recognition part. Above all, exact pole recognition is carried out by PDD(Pole Detection Device). And recognition of pole number is performed by PID(Pole Inspection Device). Acquired image by using line scan camera is judged whether it is free bracket or not through image processing. When it is judged as free bracket, pole number image is acquired by OCR camera and recognized by OCR. By recognizing pole number, exact location information is provided to user.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.9 no.3
• /
• pp.1087-1104
• /
• 2015

An eye location based head posture recognition method is proposed in this paper. First, face is detected using skin color method, and eyebrow and eye areas are located based on gray gradient in face. Next, pupil circles are determined using edge detection circle method. Finally, head postures are recognized based on eye location information. The proposed method has high recognition precision and is robust for facial expressions and different head postures, and can be used in mouse operation. The experimental results reveal the validity of proposed method.

• Korean Journal of Cognitive Science
• /
• v.23 no.2
• /
• pp.225-248
• /
• 2012

The summed-similarity model of visual short-term recognition proposes that the estimated amount of summed similarity between remembered items and a recognition probe determines recognition judgement decision (Kahan & Sekuler, 2002). This study examined the effect of a task-irrelevant location change on the recognition decision against two remembered Gabor gratings differing in their spatial frequencies. On each trial in Experiment, participants reported if two gratings displayed across the visual fields are the same or not as the probe grating displayed after about a second of memory delay. The probe grating would be the same as or different from the memory items (lure) by 1 or 4 JND units. The location of the probe would also vary randomly across the left and right visual field with respect to the location of the corresponding memory item. The participants were instructed to perform their recognition task exclusively to the spatial frequencies of the memory items and the probe while ignoring the potential location change of the probe. The results showed that false-recognition rates of the lure probe increased as the summed similarity between the memory items and the probe increased. The rates also further increased in the condition where the probe location was different from the location of the corresponding memory item compared to the condition where the probe location was the same. The increased false-recognition rates indicate that information stored into visual short-term memory is represented as a form of well-bound visual features rather than independent features.

• Journal of Institute of Control, Robotics and Systems
• /
• v.17 no.1
• /
• pp.47-53
• /
• 2011

To enable the efficient operation of ITS, it is necessary to collect location data for vehicles on the road. In the case of futuristic transportation systems like ubiquitous transportation and smart highway, a method of data collection that is advanced enough to incorporate road lane recognition is required. To meet this requirement, technology based on radio frequency identification (RFID) has been researched. However, RFID may fail to yield accurate location information during high-speed driving because of the time required for communication between the tag and the reader. Moreover, installing tags across all roads necessarily incurs an enormous cost. One cost-saving alternative currently being researched is to utilize GNSS (global navigation satellite system) carrierbased location information where available. For lane recognition using GNSS, a precise digital map for determining vehicle position by lane is needed in addition to the carrier-based GNSS location data. A "precise digital map" is a map containing the location information of each road lane to enable lane recognition. At present, precise digital maps are being created for lane recognition experiments by measuring the lanes in the test area. However, such work is being carried out through comparison with vehicle driving information, without definitions being established for detailed performance specifications. Therefore, this study analyzes the performance requirements of a precise digital map capable of lane recognition based on the accuracy of GNSS location information and the accuracy of the precise digital map. To analyze the performance of the precise digital map, simulations are carried out. The results show that to have high performance of this system, we need under 0.5m accuracy of the precise digital map.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.11
• /
• pp.1528-1533
• /
• 2020

Recently, indoor location recognition technology using Wi-Fi fingerprints has been applied and operated in various industrial fields and public services. Along with the interest in machine learning technology, location recognition technology based on machine learning using wireless signal data around a terminal is rapidly developing. At this time, in the process of collecting radio signal data required for machine learning, the accuracy of location recognition is lowered due to distorted or unsuitable data for learning. In addition, when location recognition is performed based on data collected at a specific location, a problem occurs in location recognition at surrounding locations that are not included in the learning. In this paper, we propose a learning data preprocessing technique to obtain an improved position recognition result through the preprocessing of the collected learning data.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.7
• /
• pp.4562-4572
• /
• 2014

The recent location-based services of smart-phones are some of the rapidly growing mobile technology. This paper proposes a technique for modifying the change cycle of location-based services according to the specific location using location based services. This technique shows that the cycle of the location-based services can be customized based on the location. As a result, this technique proposes a process that can reduce the waste of resources compared to the location based services of a constant cycle.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.1
• /
• pp.171-179
• /
• 1995

In many continuous speech recognition systems, phoneme is used as a basic recognition unit However, the coarticulation generated among neighboring phonemes makes difficult to recognize phonemes consistently. This paper proposes allophone as an alternative recognition unit. We have classified each phoneme into three different allophone groups by the location of phoneme within a syllable. For a recognition algorithm, time-delay neural network(TDNN) has been designed. To recognize all Korean allophones, TDNNs are constructed in modular fashion according to acoustic-phonetic features (e.g. voiced/unvoiced, the location of phoneme within a word). Each TDNN is trained independently, and then they are integrated hierarchically into a whole speech recognition system. In this study, we have experimented Korean plosives with phoneme-based recognition system and allophone-based recognition system. Experimental results show that allophone-based recognition is much less affected by the coarticulation.