• 대한공간정보학회지
• /
• 제24권2호
• /
• pp.25-35
• /
• 2016

Since a sophisticated location determination technology (LDT) is necessary for accurate positioning in urban area environments, numerous studies related to the LDT using the RFID (Radio Frequency IDentification) technology have been implemented for real-time positioning and data transferring. However, there are still lots of unsolved questions especially regarding what to use as base stations and what are corresponding results under the intrinsic complexity of alignment and configuration of components used for the RFID positioning. This study proposes the street light fixtures as base stations where the RFID receivers will be embedded for the mobile tracking scheme. As street light fixtures are usually installed at a certain distance interval, they can be used as base stations for the RFID receiver installation. Using the principle of the single row triangle network, the RFID receiver organization is determined based on the experiments such as recognition distance measurement and tag position accuracy estimation at inside and outside of the single row triangle network. The results verify that the mobile tracking scheme which uses RFID-embedded street light fixtures, suggested and configured in this study, is effective for the real-time outdoor positioning.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.155-163
• /
• 2023

This study deals with the maximum thermal load analysis and optimal capacity determination method of tank culture system for applying seawater source heat pump to save energy and realize zero energy. The location of the fish farm was divided into four sea areas, and the heat load in summer and winter was analyzed, respectively. In addition, two representative methods, the flow-through aquaculture system and the recirculation aquaculture system were reviewed as water treatment methods for fish farms. In addition, the concept of the exchange rate was introduced to obtain the maximum heat load of the fish farms. Finally, power consumption for heat pumps was analyzed in the view point of sea areas, tank capacity, and exchange rate based on the calculated maximum thermal load.

• 지구물리와물리탐사
• /
• 제20권1호
• /
• pp.1-11
• /
• 2017

P파 및 S파의 초동주시를 활용한 역산기법들을 통해 미소지진 모니터링의 진원위치의 정확도를 향상시키기 위해 시추공 3성분 수진기를 이용한 현장실험이 수행되었다. 3성분 수진기의 수평 $\times$ 성분을 자북방향으로 정렬시키고 중추낙하형 발생원을 이용한 실험을 통해 계측자료의 P파 초동의 입자움직임으로부터 진원의 방향을 추정할 수 있었다. 한편 계측자료에서 S파의 식별이 어려운 경우에도 편극필터의 적용으로 S파의 초동주시를 발췌할 수 있었다. P파 초동주시만을 이용한 역산기법은 진원위치에 대한 초기치가 진원으로부터 크게 이격되면 국부적인 최소값으로 수렴하여 정해를 찾지 못하는 경우가 있다. 본 연구에서는 이러한 문제를 해결하기 위해 P파와 S파의 초동주시 차이를 이용한 진원위치 결정방법과 P파 초동주시만을 이용한 역산을 복합적으로 사용한 결과 진원위치의 정확도를 향상시킬 수 있었다.

• 항공우주기술
• /
• 제13권2호
• /
• pp.99-107
• /
• 2014

다목적실용위성 2호/3호 위성자료를 이용하여 지상좌표를 결정하는 방법은 Physical Model과 RFM(Rational Function Model)의 두 가지 종류가 있다. 일반적으로 사용자에게 제공되는 모델은 RFM을 기반으로 한 RPCs(Rational Function Coefficients)이며, 이때 제공되는 RPCs는 지상좌표에서 영상좌표를 계산하는 계수이다. 사용자가 정사영상을 만들 경우에는 이 계수가 유용하나, 영상에서 임의의 영상기준점에 대응하는 지상좌표를 계산하거나, 위치정확도를 확인하기는 매우 어렵다. 본 논문은 다목적실용위성에서 제공되는 RPCs를 기반으로 Inverse RPCs를 해석하는 알고리즘과 해석된 Inverse RPCs를 기반으로 지상표고를 고려한 정밀 지상좌표 해석 알고리즘을 기술하고자 한다. 또한 Inverse RPCs의 해석된 정밀지상좌표 정확도와 Physical Model과의 차이를 계산하여 정확도를 평가하고자 한다.

• Structural Engineering and Mechanics
• /
• 제55권3호
• /
• pp.655-674
• /
• 2015

In this paper, a new and simplified method is presented in which the natural frequencies of the uniform and non-uniform beams are calculated through simple mathematical relationships. The various vibration problems such as: Rayleigh beam under variable axial force, axial vibration of a bar with and without end discrete spring, torsional vibration of a bar with an attached mass moment of inertia, flexural vibration of the beam with laterally distributed elastic springs and also flexural vibration of the beam with effects of viscose damping are investigated. The governing differential equations are first obtained and then; according to a harmonic vibration, are converted into single variable equations in terms of location. Through repetitive integrations, the governing equations are converted into weak form integral equations. The mode shape functions of the vibration are approximated using a power series. Substitution of the power series into the integral equations results in a system of linear algebraic equations. The natural frequencies are determined by calculation of a non-trivial solution for system of equations. The efficiency and convergence rate of the current approach are investigated through comparison of the numerical results obtained with those obtained from other published references and results of available finite element software.

• 한국IT서비스학회지
• /
• 제15권3호
• /
• pp.211-221
• /
• 2016

The human spatial mobility information is in high demand in various businesses; however, there are only few studies on human mobility because spatio-temporal data is insufficient and difficult to collect. Now with the spread of smartphones and the advent of social networking services, the spatio-temporal data began to occur on a large scale, and the data is available to the public. In this work, we compared the movement behavior of residents and tourists by using geo-tagged tweets which contain location information. We chose Seoul to be the target area for analysis. Various creative concepts and analytical methods are used: grid map concept, cells visited concept, reverse geocoding concept, average activity index, spatial mobility index, and determination of residents and visitors based on the number of days in residence. Conducting a series of analysis, we found significant differences of the movement behavior between local residents and tourists. We also discovered differences in visiting activity according to residential countries and used applications. We expect that findings of this research can provide useful information on tourist development and urban development.

• Nuclear Engineering and Technology
• /
• 제52권7호
• /
• pp.1597-1601
• /
• 2020

Background: Non-destructive evaluation of defects in metals or composites specimens is a regular method in radiographic imaging. The maintenance examination of metallic structures is a relatively difficult effort that requires robust techniques for use in industrial environments. Methods: In this research, iron plate, lead marker and tungsten defect with a 0.1 cm radius in spherical shape were separately simulated by MCNP code and SuperMC software. By ¹⁹²Ir radiation source, two exposures were considered to determine the depth of the actual defined defect in the software. Also by the code, displacement shift of the defect were computed derived from changing the source location along the x- or y-axis. Results: The computed defect depth was identified 0.71 cm in comparison to the actual one with accuracy of 13%. Meanwhile, the defect position was recognized by disorder and reduction in obtained gamma flux. The flux amount along the x-axis was approximately 0.5E+11 units greater than the y-axis. Conclusion: This study provides a method for detecting the depth and position of the defect in a particular sample by combining code and software simulators.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2017년도 9th Asian Crop Science Association conference
• /
• pp.13-13
• /
• 2017

By the progress of genome sequencing, infrastructures for marker-assisted breeding (MAB) of rice came to be established. Fine mapping and gene isolation have been conducted using the breeding materials derived from natural variations and artificial mutants. Such genetic analysis by the genome-wide dense markers provided us the knowledge about the many genes controlling important traits. We identified several genes or quantitative trait loci (QTL) for heading date, blast resistance, eating quality, high-temperature stress tolerance, and so on. NILs of each gene controlling heading date contribute to elongate the rice harvest period. Determination of precise gene location of blast resistance gene pi21, allowed us to overcome linkage drag, co-introduction of undesirable eating quality. We could also breed the first practical rice cultivar in Japan with a brown planthopper resistance gene bph11 in the genetic back-ground of an elite cultivar. Discovery of major and minor QTLs for good eating quality allowed us to fine-tune of eating quality according to the rice planting area or usage of rice grain. Many rice cultivars have bred efficiently by MAB for several traits, or by marker-assisted backcross breeding through chromosome segment substitution lines (CSSLs) using genetically diverse accessions. We are also systematically supporting the crop breeding of other sectors by MAB or by providing resources such as CSSLs. It is possible to pyramid many genes for important traits by using MAB, but is still difficult to improve the yielding ability. We are performing a Genomic Selection (GS) for improvement of rice biomass and grain yield. We are also trying to apply the genome editing technology for high yield rice breeding.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(D)
• /
• pp.180-184
• /
• 2010

UWB(Ultra Wide Band)는 기존의 스펙트럼에 비해 매우 넓은 대역에 걸쳐 낮은 전력으로 대용량의 정보를 전송가능하며 정확성면에서 탁월하며 신호 도달거리가 길다는 장점에서 실내 위치 측위기술로 가장 적당하다. 측위 기술 방법 중 각도를 측정하여 위치를 측정 하는 AoA방식과 도착 시간을 이용해서 위치를 측정하는 ToA방식, 그리고 두 리더기간의 시간의 차를 측정하여 리더기 간의 거리차가 일정함을 통해 얻는 쌍곡선의 교점을 이용하는 TDoA방식이 가장 대표적으로 사용되고 있다. 본 논문에서는 2개의 리더기에서 AOA방법을 통한 두 각의 교점과 ToA의 두 원들과의 교점, TDOA방식의 한 쌍의 쌍곡선의 교점을 이용하여 3개의 리더기가 아닌 2개의 리더기 사용으로 리더기의 개수를 최소화 하며 위치 추적의 정확도를 높이고자 한다. UWB의 특징과 실내 위치 결정 측위 방법 소개와 더불어 Hybrid를 통하여 얻을 수 있는 효과를 설명한다.

• 한국공작기계학회논문집
• /
• 제12권5호
• /
• pp.94-100
• /
• 2003

One of unique characteristics of guided waves is a dispersive behavior that guided wave velocity changes with an excitation frequency and mode. In practical applications of guided wave techniques, it is very important to identify propagating modes in a time-domain waveform for determination of detect location and size. Mode identification can be done by measurement of group velocity in a time-domain waveform. Thus, it is preferred to generate a single or less dispersive mode But, in many cases, it is difficult to distinguish a mode clearly in a time-domain waveform because of superposition of multi modes and mode conversion phenomena. Time-frequency analysis is used as efficient methods to identify modes by presenting wave energy distribution in a time-frequency. In this study, experimental guided wave mode identification is carried out in a steel plate using time-frequency analysis methods such as wavelet transform. The results are compared with theoretically calculated group velocity dispersion own. The results are in good agreement with analytical predictions and show the effectiveness of using the wavelet transform method to identify and measure the amplitudes of individual guided wave modes.