• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.2
• /
• pp.369-372
• /
• 2009

When measuring the luminous flux of a light source at the integrating sphere photometer, it can know the luminous flux to compare the standard lamp with the specimen lamp at the same location. But in case of PLS(plasma lighting system, microwave discharged lamp), that two lamps are cannot be the same location. If the reference illuminant and specimen lamp are cannot measure identical location, we should measure the variation of the luminous flux. For the outcome we can turn out a correction factor to revise and reflect it. But the better way is calibrate the specimen lamp locate the identical location of reference illuminant measured. In this thesis, we've test to find the correction factor for consider that change the measuring location. And it turns out the correction factor. From this, it presents the result to make a select for the reference illuminant which is against the illuminant type for newly produce.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1524-1532
• /
• 2012

The calibration method using the existing environmental characteristics is to correct taking advantage of the data that is followed Judgement on the environment. If a decision is not made on the environmental judgement, the use of traditional methods may increase rather than errors. In this paper, UWB-based localization system is utilized. We propose Location Correction Algorithm which is available on if you can not make a judgment about any circumstances for location estimation system. Reference Points was selected to observe the characteristics of the localization system. This paper searched the characteristics of the localization system in LOS environment and NLOS environment, and used data correcting the location information of the moving object by combining the two environmental characteristics. The Location Correction Algorithm is applied to the location measured from the location estimation system. This algorithm corrects for the location information of the object. As a result, the location accuracy improvement were observed.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.221-224
• /
• 2006

seismic crosshole tomography works applying borehole deviation correction were performed at a test site to detect a small cavity. Two correction methods were applied. The one is the constant distance correction which adds constant distance to surface borehole distance and the other is the constant angle correction which considers an angle between surface borehole location and bottom borehole location. After applying the corrections, the distortions of the image diminished while its resolution improved. Though the constant angle correction is the most appropriate correction method, the constant distance correction can delineate the small cavity sufficiently.

• Steel and Composite Structures
• /
• v.9 no.3
• /
• pp.209-221
• /
• 2009

Heating correction, through heating and flattening a structure with a pressing machine, is the in-situ method used to repair buckled steel structures. The primary purpose of this investigation is to develop an FEM model which can predict the mechanical response of heat-corrected plates accurately. Our model clarifies several unsolved problems. In previous research, the location of the imperfection was limited to the center of the specimen although the mechanical behavior is strongly affected by the location of the imperfection. Our research clarifies the relationship between the location of the imperfection and the mechanical behavior. In addition, we propose further reinforcement methods and validate their effectiveness. Our research concludes that the strength of a buckled specimen can be recovered by heating correction and the use of an adequate stiffener.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.8
• /
• pp.1779-1788
• /
• 2012

Recently, demands of application services in consideration of interior environment according to the stream of times, Ubiquitous. In case of interior location-based service, WLAN is now mostly used. But it is largely affected by environmental changes. To solve this problem, lots of studies on UWB are underway. The reason why studies on UWB are much made lies in that it is not much affected by environment changes owing to radio wave characteristics. So this study suggests the location correction algorithm which derives values with less influence of environment and high accuracy and corrects with more accurate location information using Ubisense system based on UWB technologies. The location correction algorithm suggested is one made after constructing environment database and use it to estimate more accurate location from the location measuring system in a high position.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.30A no.3
• /
• pp.16-33
• /
• 1993

New decoding algorithm of double-error-correction Reed-Solmon codes over GF(2$^{8}$) for optical compact disks is proposed and decoding algorithm of RS codes with triple-error-correcting capability is presented in this paper. First of all. efficient algorithms for estimating the number of errors in the received code words are presented. The most complex circuits in the RS decoder are parts for soving the error-location numbers from error-location polynomial, so the complexity of those circuits has a great influence on overall decoder complexity. One of the most known algorithm for searching the error-location number is Chien's method, in which all the elements of GF(2$^{m}$) are substituted into the error-location polynomial and the error-location number can be found as the elements satisfying the error-location polynomial. But Chien's scheme needs another 1 frame delay in the decoder, which reduces decoding speed as well as require more stroage circuits for the received ocode symbols. The ther is Polkinghorn method, in which the roots can be resolved directly by solving the error-location polynomial. Bur this method needs additional ROM (readonly memory) for storing tthe roots of the all possible coefficients of error-location polynomial or much more complex cicuit. Simple, efficient, and high speed method for solving the error-location number and decoding algorithm of double-error correction RS codes which reudce considerably the complexity of decoder are proposed by using Hilbert theorems in this paper. And the performance of the proposed decoding algorithm is compared with that of conventional decoding algorithms. As a result of comparison, the proposed decoding algorithm is superior to the conventional decoding algorithm with respect to decoding delay and decoder complexity. And decoding algorithm of RS codes with triple-error-correcting capability is presented, which is suitable for error-correction in digital audio tape, also.

• Korean Journal of Remote Sensing
• /
• v.27 no.2
• /
• pp.99-105
• /
• 2011

This research presents the correction method to correct the location error of cloud caused by parallax error, and how the method can reduce the position error. The procedure has two steps: first step is to retrieve the corrected satellite zenith angle from the original satellite zenith angle. Second step is to adjust the location of the cloud with azimuth angle and the corrected satellite zenith angle retrieved from the first step. The position error due to parallax error can be as large as 60km in case of 70 degree of satellite zenith angle and 15 km of cloud height. The validation results by MODIS(Moderate-Resolution Imaging Spectrometer) show that the correction method in this study properly adjusts the original cloud position error and can increase the utilization of geostationary satellite data.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.2
• /
• pp.381-389
• /
• 2012

This paper proposes a method which corrects location data of GPS for navigation of outdoor mobile robot. The method uses a Bayesian filter approach called the particle filter(PF). The method iterates two procedures: prediction and correction. The prediction procedure calculates robot location based on translational and rotational velocity data given by the robot command. It incorporates uncertainty into the predicted robot location by adding uncertainty to translational and rotational velocity command. Using the sensor characteristics of the GPS, the belief that a particle assumes true location of the robot is calculated. The resampling from the particles based on the belief constitutes the correction procedure. Since usual GPS data includes abrupt and random noise, the robot motion command based on the GPS data suffers from sudden and unexpected change, resulting in jerky robot motion. The PF reduces corruption on the GPS data and prevents unexpected location error. The proposed method is used for navigation of a mobile robot in the 2011 Robot Outdoor Navigation Competition, which was held at Gwangju on the 16-th August 2011. The method restricted the robot location error below 0.5m along the navigation of 300m length.

• Journal of Korea Multimedia Society
• /
• v.25 no.2
• /
• pp.280-286
• /
• 2022

In order to efficiently collect data, it is essential to locate the facilities and analyze the movement data. The current technology for location collection can collect data using a GPS sensor, but GPS has a strong straightness and low diffraction and reflectance, making it difficult for indoor positioning. In the case of indoor positioning, the location is determined by using wireless network technologies such as Wifi, but there is a problem with low accuracy as the error range reaches 20 to 30 m. In this paper, using BLE 4.2 built in Raspberry Pi, we implement Bluetooth Smart Ready. In detail, a beacon was produced for Advertise, and an experiment was conducted to support the serial port for data transmission/reception. In addition, advertise mode and connection mode were implemented at the same time, and a 3-count gradual algorithm and a quadrangular positioning algorithm were implemented for Bluetooth RSSI error correction. As a result of the experiment, the average error was improved compared to the first correction, and the error rate was also improved compared to before the correction, confirming that the error rate for position measurement was significantly improved.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.56-62
• /
• 2017

As the need for 3D spatial information increases, many local governments and related industries are establishing map-based 3D spatial information services and offering them to users. In these services, positional accuracy is one of the most important factors determining their applicability to specific tasks. This study studied the location correction method between indoor and outdoor 3D spatial information through the construction of modeling data on a BIM/GIS platform. First, we selected the sites and processed the BIM/GIS data construction with 3 steps. When connecting the BIM model including indoor spatial data and 3D texturing model based on ortho images, mismatches occurred, so we proposed a location correction method. Using the conversion algorithm, the relative coordinate-based BIM data were converted to the absolute positions and then relocated by means of the texturing data on the BIM/GIS platform.