• The Journal of Bigdata
• /
• v.9 no.1
• /
• pp.115-126
• /
• 2024

The scale and cost of disasters are increasing globally, emphasizing the importance of logistics activities in disaster response. A disaster response logistics system must place logistics hub centers in regions relatively safe from disasters and ensure the stable supply of relief goods and emergency medicines to the affected areas. Therefore, this study focuses on locating drone delivery centers that minimize disaster vulnerability when designing a disaster response delivery network. To facilitate the transport of relief supplies via drones, the maximum delivery range of drones is considered and we employed a natural disaster vulnerability index to develop optimization models for selecting drone delivery center locations that minimize disaster vulnerability. The analysis indicates that while the optimization models to minimize disaster vulnerability increase the number of hub investments, these approaches mitigate disaster vulnerability and allows the safe and effective operation of a disaster response logistics system utilizing drone deliveries.

• The Journal of the Korea Contents Association
• /
• v.17 no.11
• /
• pp.303-311
• /
• 2017

Safety accidents in railway work continue to increase every year; Engineer's negligence, trackside worker's sensory deprivation and signalman's mistake are the main reasons of such incidents. We consider this problem by far the most urgent matter in railway work because of its steady increase and risk of taking a person's life. Based on that account, a new alarm system has developed, that is called Railway Access Alarm System, to allow railway workers to sense the access of trains with not only vision, but also hearing. The detector device of this system is installed on both sides of the track locating 1.5km from the workplace. When the train enters the place, the detector device can sense the entering, sending the detect sign of train to the alarm unit, then the alarm unit warns the workers by the LED lighting and sirens. This system has several advantages compared to previous systems. First, it recognizes the train at a long distance. Secondly, there is no need for wiring work since it is a wireless system. At last, the system works by rechargeable batteries and solar charger so that it is installed in the work places where there is no external power supply. Moreover, it is proven that the system is 100% reliable by the successful on-the spot inspection evaluating the capability.

• Journal of the Korean Institute of Gas
• /
• v.26 no.5
• /
• pp.1-9
• /
• 2022

Selection of a suitable artificial lift is important in terms of efficient operation and economics for oil production. In general, process of well design includes the selection of artificial lift, but the oil recovery could be enhanced by use of hybrid system combined with two types of artificial lift method according to reservoir condition for oil production. Electric submersible pump (ESP), as a presentative artificial lift method, is a manner for supplying the pressure in the lower part of oil well by using of a multi-stage centrifugal pump with an electric energy. However, there is a disadvantage that has a limit to the application period because of mechanical defection on ESP. Accordingly, it is possible to reduce the shutdown time of production well by applying the ESP/Gas lift hybrid system, which is to switch to a gas lift when an ESP is defective. This study describes the effect of ESP/gas lift hybrid system compared with ESP method for a onshore horizontal well locating in the of Permian basin, USA. As a result of study, ESP/gas lift hybrid system could make more effective productivity than ESP method. Also, we quantitatively predicted how much economic benefit would be obtained when the hybrid system was applied in the production well.

• The KIPS Transactions:PartD
• /
• v.10D no.1
• /
• pp.85-100
• /
• 2003

Today's computing system has expanded its application to business trade and distributed work transactions using the Internet. As the demand for more flexible, adaptable, extensible, and robust web-based enterprise, these application development has been gradually expanded based on reusable, independent, and portable components. Component Based Development (CBD) works by developing and evolving software from selected reusable software components and then assembling them within appropriate software architecture. However, it requires an increase in cost to build new components as well as the necessary effort to develop of the business requirement these components. Standardized component models are required as well from the perspective of systems in order to support rapid and exact component information transmission on the web. In this paper, we describe the e-Business Component Development with agent for rapid application development on the web that correspond to the demands of users in the business domain. We design and implement the specifications of e-business components by combining these demands. In order to improve the agent register and retrieval, we propose the intelligent search and register agents, which can conduct more precise searching and specializing for components. The system enables the locating of user's frequently used components through an agent involving register and retrieval, as well as rapid procedures for registers The e-BCOS (e-Business Component System) is the agent system for the user to register distributed components and to search for components Information. The e-BCOS increases reusability through the e-business component development of distributed components in the business domain. For the share and delivery, specification with XML is acceptable to user's variable order e-BCOS Includes the effective investment, timeliness, reliability, efficiency, and maintenance effort by with agent.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.6 no.4
• /
• pp.51-58
• /
• 2003

Satellite-based positioning system such as global positioning system(GPS) has played a major role in data capture technology for constructing GIS database. Recent advances in satellite-based positioning technology have made the task of precisely locating features fast, easy, and inexpensive, and determined their current latitude and longitude. However, there are still situations where satellite-based positioning service will not provide users with desired precision such as in urban environments, that is, the only severe handicap still hampering satellite-based positioning is the well-known problem of restricted satellite visibilities. As the majority of the creation and updating of road and street network are carried out in urban environments, the obstruction problem considerably impedes the wider application of satellite-based positioning. This paper presents the current GPS-based positioning environment for GIS data acquisition in urban areas. A field experiment with measurement vehicle has been performed under varying operational conditions and areas where shading of satellite signal is encountered due to buildings and overpasses with measurement vehicle in order to evaluate the availability of existing GPS-based positioning. We found that the current GPS-base positioning system we used in this study was insufficient for a precise GIS data acquisition. This research would make a contribution for the development of base data to supplementary technology, which can complement the existing GPS-based positioning.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.10
• /
• pp.181-187
• /
• 2013

When there are background noises or some people speaking at the same time, a human's auditory sense has the ability to listen the target speech signal with a specific purpose through Auditory Scene Analysis. The CASA system with human's auditory faculty system is able to segregate the speech. However, the performance of CASA system is reduced when the CASA system fails to determine the correct position of the speech. In order to correct the error in locating the speech on the CASA system, voice activity detection algorithm is proposed in this paper, which is a combined auditory scene analysis with PAR(Periodic to Aperiodic component Ratio). The experiments have been conducted to evaluate the performance of voice activity detection in environments of white noise and car noise with the change of SNR 15~0dB. In this paper, by comparing the existing algorithms (Pitch and Guoning Hu) with the proposed algorithm, the accuracy of the voice activity detection performance has been improved as the following: improvement of maximum 4% at SNR 15dB and maximum 34% at SNR 0dB for white noise and car noise, respectively.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.8
• /
• pp.2233-2244
• /
• 1999

It is essential to guarantee high reliability of embedded real-time systems since the failure of such systems may result in large financial damage or threaten human life. Though many researches have devoted to fault tolerant mechanisms, most of them are object-level fault tolerant mechanisms that can detect errors occurred in a single object and treat the errors in object-level. As embedded real-time systems become more complex and larger, there exist faults that cannot be detected by or tolerated with object-level fault tolerance. Hence, system-level fault tolerance is needed. System-level fault tolerance examines the status of a system whether the system is normal or not by analyzing the status of objects. When an error is detected it should be capable of locating the fault and performing an appropriate recovery and reconfiguration action. In this paper, we propose RobustRTO(Robust Real-Time Object) that provides object-level fault tolerance capability and RMO(Region Monitor real-time Object) that offers system-level fault tolerance capability. Then we show how highly dependable fault tolerant systems can be modeled by RobustRTO and RMO. The model is presented based on real-time objects.

• Journal of Intelligence and Information Systems
• /
• v.15 no.2
• /
• pp.33-48
• /
• 2009

Capsule endoscopy is one of the most remarkable inventions in last ten years. Causing less pain for patients, diagnosis for entire digestive system has been considered as a most convenience method over a normal endoscope. However, it is known that the diagnosis process typically requires very long inspection time for clinical experts because of considerably many duplicate images of same areas in human digestive system due to uncontrollable movement of a capsule endoscope. In this paper, we propose a method for clinical diagnosticians to get highly valuable information from capsule-endoscopy video. Our software system consists of three global maps, such as movement map, characteristic map, and brightness map, in temporal domain for entire sequence of the input video. The movement map can be used for effectively removing duplicated adjacent images. The characteristic and brightness maps provide frame content analyses that can be quickly used for segmenting regions or locating some features(such as blood) in the stream. Our experiments show the results of four patients having different health conditions. The result maps clearly capture the movements and characteristics from the image frames. Our method may help the diagnosticians quickly search the locations of lesion, bleeding, or some other interesting areas.

• Steel and Composite Structures
• /
• v.20 no.4
• /
• pp.801-812
• /
• 2016

In an actual design, none of the structures with shear behaviors will be designed for torsional moments. Any failure or damages to roofs, infills, shear walls, and braces caused by an earthquake, will inevitably result in relocation of center of mass and rigidity of the structure. With these changes, the dynamic characteristics of structure could be changed during an earthquake at any moment. The main objective of this paper is to obtain the relationship between time-varying eccentricity of load and corner lateral displacement. In this study, various methods have been used to determine the structural response for time-varying lateral corner displacement. As will be seen below, some of the structural calculation methods result in a significant deviation from the actual results, although these methods include the interaction effects of modes. Controlling the lateral displacement of structure can be performed in different ways such as, passive dampers, friction dampers, semi-active systems including the MR damper and active Systems. Selecting and locating these control systems is very important to bring the maximum safety with minimum cost into the structure. According to this study will be show the relation between the corner lateral displacements of structure and time-varying eccentricity by different kind of methods during an earthquake. This study will show that the response of the structure at the corners due to an earthquake can be very destructive and because of changing the eccentricity of load, calculating the maximum possible response of system can be carried out by this method. Finally, some kind of systems must be used for controlling these displacements. The results shows that, the CQC, DSC and exact methods is comply each other but the results of Vanmark method is not comfortable for these kind of buildings.

• Korean Journal of Occupational Health Nursing
• /
• v.11 no.2
• /
• pp.121-131
• /
• 2002

Objective: The purpose of this study was to determine the physical load by identifying harmfully working postures and to develop recommendations for improving the existing situation with nurses in ICU, thereby to provide the basis for development of work-related musculoskeletal preventive program. Method: Various types of tasks were recorded with a video camera to chart and analyze different postures by OWAS(Ovako Working Posture Analysing System). Collected data showed that poor postures were adopted, not only for lifting or repositoning a patient, but also for other tasks. Data Analysis: The performed activities were then divided into Nursing Intervention Classification. Altogether 128 postures were selected for analysis. Then they were classified into different OAC (OWAS Action Categories). From all the observation, unhealthy postures, for which corrective measures had to be considered immediately (i.e., 75% classified as OACII+III+IV) were found. Collected data were analyzed in terms of percentage, 2-tail Mann-Whitney U test. Result: Poor postures mainly occur during 'positioning the patient' and 'airway suctioning' in NIC. No difference was found (p=0.060) between the percentage of harmful posture adopted during the patient handling tasks and non-patient handling tasks. Conclusion: This study shows, that in the nursing profession with ICU not only occur during patient handling, but also during other activities. The OWAS method was useful in determining the physical load by locating potential activities due to harmfully working postures, providing a detailed description with analysis, and suggesting successful means to reduce postural load.