• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.9 no.1
• /
• pp.102-110
• /
• 2000

This paper presents an algorithm of local map building for autonomous robot navigation using LASER range finder information. We develop a model of sensor output for a LASER range finder, and obtain an output data of the LASER range finder for a given environment. From the output data, a local map is obtained through the following procedures: (1) filtering of output data to remove noisy and unnecessary data, (2) comparison of filtered data with the original data to restore useful data, (3) thickening of the map obtained from the restored data, and (4) skeletonizing of the thickened map to get a final local map. Through some simulation studies, a map is obtained from the LASER range finder information for a given indoor environment, and is compared with the environment.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.6
• /
• pp.29-35
• /
• 2021

In this paper, we propose a method that combines KNN(K-Nearest Neighbor), Local Map Classification and Bayes Filter as a way to increase the accuracy of location positioning. First, in this technique, Local Map Classification divides the actual map into several clusters, and then classifies the clusters by KNN. And posterior probability is calculated through the probability of each cluster acquired by Bayes Filter. With this posterior probability, the cluster where the robot is located is searched. For performance evaluation, the results of location positioning obtained by applying KNN, Local Map Classification, and Bayes Filter were analyzed. As a result of the analysis, it was confirmed that even if the RSSI signal changes, the location information is fixed to one cluster, and the accuracy of location positioning increases.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.12
• /
• pp.1046-1052
• /
• 2016

For the safe driving of autonomous vehicles, accurate position estimation is required. Generally, position error must be less than 1m because of lane keeping. However, GPS positioning error is more than 1m. Therefore, we must correct this error and a map matching algorithm is generally used. Especially, road marking intensity map have been used in many studies. In previous work, 3D LIDAR with many vertical layers was used to generate a local intensity map. Because it can be obtained sufficient longitudinal information for map matching. However, it is expensive and sufficient road marking information cannot be obtained in rush hour situations. In this paper, we propose a localization algorithm using an accumulated intensity local map. An accumulated intensity local map can be generated with sufficient longitudinal information using 3D LIDAR with a few vertical layers. Using this algorithm, we can also obtain sufficient intensity information in rush hour situations. Thus, it is possible to increase the reliability of the map matching and get accurate position estimation result. In the experimental result, the lateral RMS position error is about 0.12m and the longitudinal RMS error is about 0.19m.

• The Journal of Korea Robotics Society
• /
• v.8 no.4
• /
• pp.256-265
• /
• 2013

A local map-based exploration algorithm for mobile robots is presented. Segmented frontiers and their relative transformations constitute a tree structure. By the proposed efficient frontier segmentation and a local map management method, a robot can reduce the unknown area and update the local grid map which is assigned to each frontier node. Although this local map-based exploration method uses only local maps and their adjacent node information, mapping completion and efficiency can be greatly improved by merging and updating the frontier nodes. Also, we suggest appropriate graph search exploration methods for corridor and hall environments. The simulation demonstrates that the entire environment can be represented by well-distributed frontier nodes.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.18 no.11
• /
• pp.2902-2912
• /
• 1994

The ultrasonic array sensor system, consisting of one transmitter and fourreceivers instead of the traditional combination of a transmitter and a receiver is proposed in order to identify the location of objects. From the theoretical analysis and the experimental results, it is found that this new array sensor system could derive the information on the position of objects accurately, while the traditional sensor system could provide only the informatioin on the distance to objects. This sensor system is used to develop a sonar-based local mapping algorithm. The local map is used to find the existence of possible gates, through which the mobile robots can pass, and to select the suitable one in order for the robots to reach the goal safely in the presence of obstacles. The performance of the proposed local map algorithm is demonstrated experimentally in a small working area with several obstacles. It is found that the quality of the resulting local map is sufficient for the avoidance of collisions between the robots and obstacles and for the selection of the suitable gate leading to the goal. It is also shown that the global map of the working area could be obtained by integrating several local maps constructed from different locations and that it matches the actual layout of the working area well.

• Journal of Institute of Control, Robotics and Systems
• /
• v.12 no.7
• /
• pp.693-699
• /
• 2006

An accurate and compact map is essential to an autonomous mobile robot system. For navigation, it is efficient to use an occupancy grid map because the environment is represented by probability distribution. But it is difficult to apply it to the large environment since it needs a large amount of memory proportional to the environment size. As an alternative, a topological map can be used to represent it in terms of the discrete nodes with edges connecting them. It is usually constructed by the Voronoi-like graphs, but in this paper the topological map is incrementally built based on the local grid map using the thinning algorithm. This algorithm can extract only meaningful topological information by using the C-obstacle concept in real-time and is robust to the environment change, because its underlying local grid map is constructed based on the Bayesian update formula. In this paper, the position probability is defined to evaluate the quantitative reliability of the end nodes of this thinning-based topological map (TTM). The global TTM can be constructed by merging each local TTM by matching the reliable end nodes determined by the position probability. It is shown that the proposed TTM can represent the environment accurately in real-time and it is readily extended to the global TTM.

• International Journal of Contents
• /
• v.7 no.2
• /
• pp.11-16
• /
• 2011

In this paper, we develop a mobile MAP open API using HTML5 local storage and the W3C geolocation API. The mobile MAP open API consists of the basic JavaScript MAP API, offline navigation API, and multimedia POI (mPOI) API. The basic JavaScript MAP API creates a map and controls, rotates, and overlays data on the map. The offline navigation API is developed using HTML5 local storage and web storage. The mobile web application downloads and stores mPOIs of works of art to local storage or web storage from a web server. The mPOI API is developed using HTML5 video and audio APIs. We develop a mobile art park guidance application using the developed mobile MAP open API.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.12C
• /
• pp.1194-1200
• /
• 2006

In this paper, we propose an adaptive MAP (Maximum A Posteriori) high-resolution image reconstruction algorithm using local statistics. In order to preserve the edge information of an original high-resolution image, a visibility function defined by local statistics of the low-resolution image is incorporated into MAP estimation process, so that the local smoothness is adaptively controlled. The weighted non-quadratic convex functional is defined to obtain the optimal solution that is as close as possible to the original high-resolution image. An iterative algorithm is utilized for obtaining the solution, and the smoothing parameter is updated at each iteration step from the partially reconstructed high-resolution image is required. Experimental results demonstrate the capability of the proposed algorithm.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.666-669
• /
• 2000

Localization is the process of aligning the robot's local coordinates with the global coordinates of a map. A mobile robot's location is basically computed by a dead reckoning scheme, but this position information becomes increasingly inaccurate during navigation due to odometry errors. In this paper, the method of building a map of a robot's environment using ultrasonic sensor data and the occupancy grid map scheme is briefly presented. Then, the search and matching algorithms to compensate for the odometry error by comparing the local map with the reference map are proposed and verified by experiments. It is shown that the compensated error is not accumulated and exists within the limited range.

• Honam Mathematical Journal
• /
• v.26 no.1
• /
• pp.107-117
• /
• 2004

The aim of this paper is to introduce a digital $({\kappa}_0,\;{\kappa}_1)$-covering map and a local $({\kappa}_0,\;{\kappa}_1)$-homeomorphism. And further, we show that a digital $({\kappa}_0,\;{\kappa}_1)$-covering map is a local $({\kappa}_0,\;{\kappa}_1)$-homeomorphism and the converse does not hold. Finally, some property of a digital covering map is investigated with relation to some restriction map. Furthermore, we raise an open problem with relation to the product covering map.