• Journal of Conservation Science
• /
• v.35 no.3
• /
• pp.197-208
• /
• 2019

Biological damages of wooden cultural properties are closely related to the preservation of the environment; these damages can be accelerated because of rapid climate change. Therefore, to preserve cultural properties, it is important to understand environmental characteristics. This study aims to investigate the status of termite damage and the characteristics of major environmental factors such as micro-meteorology, meso-meteorology, and local-meteorology of the Josadang shrine in the Seonamsa temple at Suncheon. Damage was confirmed by visual observation and the response of the termite detection dog at the north-west corner. Also another damage was observed by the termite detection dog at the north-east corner. These pillars had lower surface temperature and higher moisture content compared with the pillars in the front. The mean temperature of the entire time was similar for the meteorologies; however, the relative humidity differed. High relative humidity, greater than 70%, was observed frequently. In particular, it was determined that the termite activity days were the most inside the Josadang shrine. The statistical analysis confirmed that there was a difference between the meteorology events through the F ratio. In addition, the difference of environmental factors with relative humidity and temperature was identified more great difference in relative humidity through the t-statistics of temperature and relative humidity. And then relative humidity was confirmed most great in the difference of meso-meteorology and local-meteorology.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_1
• /
• pp.1407-1419
• /
• 2020

Long time-series gridded data is crucial for the analyses of Earth environmental changes. Climate reanalysis and satellite images are now used as global-scale periodical and quantitative information for the atmosphere and land surface. This paper examines the feasibility of DCT-PLS (penalized least square regression based on discrete cosine transform) for the spatial gap filling of gridded data through the experiments for multiple variables. Because gap-free data is required for an objective comparison of original with gap-filled data, we used LDAPS (Local Data Assimilation and Prediction System) daily data and MODIS (Moderate Resolution Imaging Spectroradiometer) monthly products. In the experiments for relative humidity, wind speed, LST (land surface temperature), and NDVI (normalized difference vegetation index), we made sure that randomly generated gaps were retrieved very similar to the original data. The correlation coefficients were over 0.95 for the four variables. Because the DCT-PLS method does not require ancillary data and can refer to both spatial and temporal information with a fast computation, it can be applied to operative systems for satellite data processing.

• Journal of the Korean earth science society
• /
• v.41 no.6
• /
• pp.575-587
• /
• 2020

Meteorological phenomena are observed by the Korea Meteorological Administration in a variety of ways (e.g., surface, upper-air, marine, ocean, and aviation). However, there are limits to the meteorological observation of the planetary boundary layer (PBL) that greatly affects human life. In particular, observations using a sonde or aircraft require significant observational costs in economic terms. Therefore, the goal of this study was to measure and analyze the meteorological factors of the vertical distribution of the see-land breeze among local meteorological phenomena using meteorological drones. To investigate the spatial distribution of the see-land breeze, a same integrated meteorological sensor was mounted on each drone at three different points (seaside, bottom of mountain, and mountainside), including the Boseong tall tower (BTT) at the Boseong Standard Weather Observatory (BSWO) in the Boseong region. Vertical profile observations for air temperature, relative humidity, wind direction, wind speed, and air pressure were conducted up to 400 m every 30 minutes from 1100 LST to 1800 LST on August 4, 2018. The spatial characteristics of meteorological phenomena for temperature, relative humidity, and atmospheric pressure were not shown at the four points. Strong winds (~8 m s-1) were observed from the midpoint (~100 m) at strong solar radiation hour, and in the afternoon the wind direction changed from the upper layer at the inland area to the west wind. It is expected that the analysis results of the lower atmospheric layer observed using the meteorological drone may help to improve the weather forecast more accurately.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.42 no.5
• /
• pp.617-626
• /
• 2022

In Korea, annual precipitation and its variability have gradually increased since modern meteorological observations began, and the risk of disasters has also been increasing due to significant regional variations and recent abnormal climate conditions. Given that damage from storms and floods mainly occurs around rivers, it is crucial to determine the appropriate design frequency for river-related projects. This study examined existing design practices used to determine hydrological design frequencies and suggested a new method to determine appropriate design frequencies. The study collected available data pertaining to seven evaluation factors, specifically the basin areas, shape parameters, channel slopes, stream orders, backwater effect reaches, extreme rainfall frequencies, and urbanized flood inundation areasfor 413 local rivers in Chungcheongnam-do in Korea. The estimated weights for areas of extreme rainfall frequencies and urbanized flood inundation were found to be 18, having a great effect on determining the design frequency. Compared with the established design frequency in previous government reports, the estimated design frequency increased for 255 rivers and decreased for 158 rivers.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.428-434
• /
• 2022

This study was conducted to derive the site index of forest productivity of Robinia pseudoacacia (honey plant) to characterize suitable planting sites and to investigate the effect of the site environmental factors on the site index using the quantification theory I method. The data used in the analysis were growth factors (stand age, dominant height, etc.) of the 6th national forest resources survey and various site environmental factors of a forest soil map (1:5,000). The average site index value of the R. pseudoacacia stand in Korea was 14 (range, 8 to 18). The environmental factors affecting the site index were parent rock, climatic zone, soil texture, local topography, and altitude. The accuracy of the estimation model using quantification theory I was only 33%. However, the correlation between the site index and the site environmental factors was statistically significant at the 1% level. Results of quantification analysis between site index and site environmental factors revealed that metamorphic and igneous rocks received high grades as parent rocks, climate zones received higher grades than central temperate zone, clay loam and silt loam received high grades in soil texture, and hillside received a high grade in local topography. Analysis of the partial correlation between site topographical factors and forest productivity (site index) found that soil class and altitude were partially correlated to x by 0.4129 and 0.4023, respectively, indicating that these factors are the most influential variables.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.26 no.4
• /
• pp.80-96
• /
• 2023

The expansion of human activities and road development has led to the loss and fragmentation of ecological spaces, which is a negative factor for biodiversity. In particular, urban areas where land use and land cover have rapidly changed into urbanization zones are regions where ecological spaces are lost and isolated, making it difficult for wildlife to inhabit. Furthermore, the loss and fragmentation of ecological spaces due to urbanization can have a negative impact on ecosystem services. Therefore, to enhance biodiversity and ecosystem services in urban and national land, it is necessary to establish a practical ecological axis that reflects the current status of the city. Thus, this study analyzed the connectivity of ecological spaces and forest axis that can be used for spatial planning related to urban ecological axis of local governments in Daegu and Gyeongsangbuk-do. The ecological connectivity was analyzed by dividing the Daegu-Gyeongbuk region into 31 local government units, distinguishing between forests and natural areas using land cover data. Subsequently, the study area was divided into 20,483 hexagonal grids of 1 square kilometer each, and the restoration effects for ecological fragmentation within 100 meters were spatially clustered to visualize priority restoration areas. The forest axis was derived by considering regional conditions such as land cover, building area, slope, and others to connect 1,534 forests of 100 hectares or more. The research results are expected to be used as fundamental data for spatial planning, goal setting, and the selection of restoration areas for improving ecological connectivity.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.22 no.6
• /
• pp.196-207
• /
• 2023

As part of measures to address the climate crisis, buses are also being converted to electric and hydrogen buses. Local authorities need to prioritize carbon emissions when allocating newly introduced and converted electric and hydrogen buses, and as a method, consider the introduction of Low Emission Bus Zones (LEBZ) to propose the reduction of pollution from specific links. To introduce LEBZ, it is necessary to compare the carbon emissions before and after its implementation, yet there is a shortage of studies that focus solely on buses or analyze the effects of introducing LEBZ to specific links. In this paper, we utilized bus information system data to calculate and compare the effects of introducing LEBZ to bus priority lanes in Jeju. We categorized scenarios into five groups, with scenarios 1 through 4 involving the introduction of LEBZ, and scenario 5 designating cases where LEBZ was not introduced. Comparative results confirmed that in scenarios with LEBZ introduction, the reduction per km reached a maximum of 0.097t per km, whereas in cases without LEBZ, it amounted to 0.022t per km, demonstrating higher efficiency. It underscores the significance of conducting carbon emission calculations and comparing the effects of LEBZ introduction using bus information system data, which can be directly applied by local authorities to make informed and rational decisions.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.4
• /
• pp.371-381
• /
• 2012

This study investigates quantitative wear training effects and involved 15 participants from a previous study (part 1) in May to September 2009. Before wear training, the subjects' rectal temperature, skin temperature, heart rate, blood pressure and local sweating were measured for 1 hour in a climate chamber ($39{\pm}1^{\circ}C$, $65{\pm}5%RH$, 0.3m/s) to evaluate heat tolerance. Subsequently, the subjects were divided into 3 groups that consisted of 5 participants. Group N (control-group) dressed the participants so that they felt comfortable (or cool). Group W and MW where participants underwent regular wear training for 10 weeks (5 days a week a total of 50 times). The intensity of the wear training for the participants of group MW was stronger than that for group W. A heat-tolerance experiment was performed after wear training. The results were as follows: 1. The participants of groups W and MW felt more comfortable after wear training than before wear training in the case of warmer $T_{cl}$. However, no significant differences were observed before and after wear training for group N. 2. The heat tolerance of the participants of groups W and MW was higher after wear training than before wear training. However, no significant difference was noted in this regard for group N. 3. The results showed the wear training effect (based on quantitative guidelines). The results show that the predicted optimal temperature inside clothing can enhance heat tolerance.

• Advances in aircraft and spacecraft science
• /
• v.1 no.3
• /
• pp.311-330
• /
• 2014

Environmental impact of aircraft emissions can be addressed in two ways. Air quality impact occurs during landings and takeoffs while in-flight impact during climbs and cruises influences climate change, ozone and UV-radiation. The aim of this paper is to investigate airports related local emissions and fuel consumption (FC). It gives flight path optimization model linked to a dispersion model as well as numerical methods. Operational factors are considered and the cost function integrates objectives taking into account FC and induced pollutant concentrations. We have compared pollutants emitted and their reduction during LTO cycles, optimized flight path and with analysis by Dopelheuer. Pollutants appearing from incomplete and complete combustion processes have been discussed. Because of calculation difficulties, no assessment has been made for the soot, $H_2O$ and $PM_{2.5}$. In addition, because of the low reliability of models quantifying pollutant emissions of the APU, an empirical evaluation has been done. This is based on Benson's fuel flow method. A new model, giving FC and predicting the in-flight emissions, has been developed. It fits with the Boeing FC model. We confirm that FC can be reduced by 3% for takeoffs and 27% for landings. This contributes to analyze the intelligent fuel gauge computing the in-flight fuel flow. Further research is needed to define the role of $NO_x$ which is emitted during the combustion process derived from the ambient air, not the fuel. Models are needed for analyzing the effects of fleet composition and engine combinations on emission factors and fuel flow assessment.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.6 no.4
• /
• pp.8-16
• /
• 2003

In terms of climate change communities have only during the 1990s begun to recognize that all greenhouse gas(GHG) emissions are directly or indirectly generated locally, through acts of agency, production or consumption. This has provided a boost to the role of local places in the debate since GHGs can be allocated and made understood locally and hence form the basis for specific policies, programs, plans and projects. The objectives of this study are to define a framework for making Environmentally Friendly City through enhancing integrated energy-urban policies and present framework to do comprehensive evaluation on energy related policies response and also explore the interrelation between energy related activities in each sector and policy and applies to Seoul mega city in Korea. Despite the growing recognition of the seriousness of urban environmental problems and their contribution to global environmental and social concerns, most analysts continue to study cities in parts rather than as a whole; we study sectoral sub-systems such as transport, air pollution or energy. While specialization is useful for detailed thinking, we also need to see each issue in the context of how each city works environmentally, economically, socially and politically. We therefore need integrative approaches to study of cities and need to understand how they function as systems. These framework presented in this study allows an organized and systematic analysis. These research results can provide useful, credible and timely input into the urban planning process. This study will be a helpful exercise to draw some policy implications of other cities in Korea and also East Asia that are in a similar stage with the these cities and developing plans on how to address them.