• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.278-279
• /
• 2004

The multiplication region of an APD(Avalanche photodiode) plays a critical role in determining the gain, the multiplication noise, and the gain-bandwidth product. we compared and analyzed the local model and the non-local model for a 10Gb/s APD designing.

• 한국멀티미디어학회논문지
• /
• 제3권4호
• /
• pp.365-371
• /
• 2000

카메라의 렌즈 등 광학장비의 성능 제한으로 인하여 초점이 맞지 않아 흐려지고 잡음으로 훼손된 영상을 복원하는데 일반적으로 반복복원방법이 사용된다. 이 경우에 가속변수는 훼손영상에 관계없이 영상전체에 일률적으로 적용되기 때문에 흐려짐 훼손이 심한 윤곽부분도 훼손이 작은 평면영역과 같이 일정하게 처리되어 수렴속도가 느려지고 시각적으로 중요한 윤곽부분의 복원에는 효율적이지 못하다. 이러한 문제점을 해결하기 위하여 본 논문에서는 흐려짐 훼손이 작은 평면영역은 가속변수를 작게 하고 훼손이 큰 윤곽영역은 가속변수를 크게 하여 영상의 국부적인 훼손특성에 따라 적응적으로 반복 복원하는 방법을 제안하였다. 제안한 복원방법 은 기존의 방법과 비교하여 수렴속도가 빨라지고 시각적으로 중요한 윤곽부분의 복원에도 효율적임을 실험결과를 통해 알 수 있었으며, MSE면에서도 우수하였다.

• 대한기계학회논문집B
• /
• 제20권4호
• /
• pp.1395-1405
• /
• 1996

The purpose of this experimental research is to investigate the local heat transfer characteristics in the upward free water jet impinged on a downward flat plate of uniform heat flux. The inner shape of rectangular nozzle used was sine curve type and its contraction ratio of inlet to outlet area was five. Experimental parameters considered were Reynolds number, nozzle exit-flat plate distance, and level of supplementary water. Local Nusselt number was influenced by Reynolds number, Prandtl number, supplementary water level, and distance between the nozzle exit and flat plate. Within the impingement region, the Nusselt number has a maximum value on the nozzle center axis and decreases monotonically outward from center. Outside of the impingement region, on the other hand, the Nusselt number has a secondary peak near the position where the distance from nozzle center reaches four times the nozzle width. However if nozzle exit velocity exceeds 6.2 m/s, the secondary peak appears also in the impingement region. The empirical equation for the stagnation heat transfer is a function of Prandtl, Reynolds, and axial distance from the nozzle exit. The optimum level of supplementary water to augment the heat transfer rate at stagnation point was found to be twice the nozzle width.

• 한국정보처리학회논문지
• /
• 제7권1호
• /
• pp.286-295
• /
• 2000

본 논문은 MR 영상의 비지도 분할을 위하여 MDL원리를 이용한 통계적 모델기반의 적응적 방법을 제안한다. 이 방법에서 조직 영역을 MRF로 모델링함으로써 잡음에 대응하고, 창으로 정의되는 국소영역 내의 밝기값을 가우스 혼합으로 모델링함으로써 영상의 비균일성을 흡수한다. 분할 알고리즘은 ICM을 기반으로 하며 MAP를 근사적으로 추정하고, 모델 파라미터를 국소영역으로부터 구한다. 파라미터 추정과 분할을 위한 창의 크기는 MDL원리를 이용하여 영상으로부터 추정한다. 실험에서 제안한 방법이 특히 비균일성이 있는 MR영상의 분할에서 국소영역의 영상특성을 잘 반영하였으며, 기존의 방법보다 더 좋은 결과를 보여주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 D
• /
• pp.1953-1955
• /
• 1999

The effects of the local lifetime control on the characteristics of IGBT are investigated using the 2-dimensional device simulator, MEDICI. Many lumped resistive turn-off simulations are carried out to analyze the effects of the minority carrier lifetime, the width, and the position of the region with a reduced local minority carrier lifetime. As a result of these simulations, it is concluded that the on state voltage drop$(V_{CE,SAT})$ is only slightly increased while the switching behavior is greatly improved if the low lifetime region is properly set. And these results are compared with IGBTs having uniform lifetime.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1098-1103
• /
• 2004

In this study, the effect of channel flow in the concave surface on local heat transfer characteristics of array jets was investigated experimentally. A TLC method is employed to determine local heat transfer coefficients on the target plate and also flow visualization has been conducted to investigate the behavior of a row of impinging jets and array of impinging jets. Two different array patterns of impinging array jets devices are tested for Reynolds number(Re=10,000). In a row of impinging jets, secondary vortex is strongly maintained by main vortex at nozzle-to-plate distance of H/d=2. Therefore, the Nusselt number slowly decreased at the mid-way region between adjacent jets. In array jets, the local maximum Nusselt number region move further in the downstream direction due to the increase of channel flow velocity.

• 전자공학회논문지B
• /
• 제33B권9호
• /
• pp.13-23
• /
• 1996

When artificial potential field approach is used to avoid obstacle, the problem can be occurred in case that manipulator selects the path which across over an obstacle among paths. In thiscase manipulator can't reach the desired goal form obstacle. This problem is a case of structual local minimum. so this paper proposes the method to solve structual local minimum in this case. The method is that the manipulator goes via temporary goal. This paper proposes that visual region concept to select the temporary goal. The temporary goal is selected on the border of the visual region. To prove its effectiveness, two simulation examples are done by two link manipulator in two dimension and by three link manipulator in three dimension.

• Journal of Mechanical Science and Technology
• /
• 제18권7호
• /
• pp.1258-1266
• /
• 2004

It is important to completely understand heat/mass transfer from a flat plate because it is a basic element of heat/mass transfer. In the present study, local heat/mass transfer coefficient is obtained for two flow conditions to investigate the effect of boundary layer using the naphthalene sublimation technique. Obtained local heat/mass transfer coefficient is converted to dimensionless parameters such as Sherwood number, Stanton number and Colburn j-factor. These also are compared with correlations of laminar and turbulent heat/mass transfer from a flat plate. According to experimental results, local Sherwood number and local Stanton number are in much better agreement with the correlation of turbulent region rather than laminar region, which means analogy between heat/mass transfer and momentum transfer is more suitable for turbulent boundary layer. But average Sherwood number and average Colburn j-factor representing analogy between heat/mass transfer and momentum transfer are consistent with the correlation of laminar boundary layer as well as turbulent boundary layer.

• 한국통신학회논문지
• /
• 제21권4호
• /
• pp.834-847
• /
• 1996

A selective coding scheme is proposed that describes a method for coding image sequences distinguishing bits between background and target region. The suggested method initially estimates global motion parameters and local motion vectors. Then segmentation is performed with a hierarchical clustering scheme and a quadtree algorithm in order to divide the processing image into the backgraound and target region. Finally image coding is done by assigning more bits to the target region and less bits to background so that the target region may be reconstructed with high quality. Simulations show that the suggested algorithm performs well especially in the circumstances where background changes and target regionis small enough compared with that of background.

• 에너지공학
• /
• 제14권1호
• /
• pp.30-36
• /
• 2005

본 논문에서는 실린더 후류 영역의 열전달 특성에 대한 실험결과를 보고하였다. 정체점(θ=0°)로부터 실린더 뒷면(θ=180°)까지 국소 열전달을 측정하였으며, 축 방향에 대한 누셀트 수의 변화도 조사하였다. 덕트 중앙에 비하여 덕트 벽면근처의 후류영역 열전달계수는 58% 정도 높게 측정되었으며, 종횡비와 열전달 경계조건의 영향도 조사하였다.