• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1876-1885
• /
• 2003

The artificial potential field (APF) methods provide simple and efficient motion planners for practical purposes. However, these methods have a local minimum problem, which can trap an object before reaching its goal. The local minimum problem is sometimes inevitable when an object moves in unknown environments, because the object cannot predict local minima before it detects obstacles forming the local minima. The avoidance of local minima has been an active research topic in the potential field based path planing. In this study, we propose a new concept using a virtual obstacle to escape local minima that occur in local path planning. A virtual obstacle is located around local minima to repel an object from local minima. We also propose the discrete modeling method for the modeling of arbitrary shaped objects used in this approach. This modeling method is adaptable for real-time path planning because it is reliable and provides lower complexity.

• Proceedings of the Korean Information Science Society Conference
• /
• 2003.10c
• /
• pp.199-201
• /
• 2003

Ad hoc network은 stationary infrastructure의 도움 없이 이동 노드들이 필요 시 network 형태을 구성하여 통신이 이루어지게 하는 network으로 ad hoc network 환경에 맞는 다양한 라우팅 프로토콜들이 개발되었고 크게는 table­driven, on­demand 방식으로 나눌 수 있는데 on­demand 방식의 AODV 프로토콜은 routing overhead가 적다는 장점이 있는 반면 single path로 data forwarding을 진행하여 중간노드의 이동에 의한 path가 broken되는 경우 local routing을 하거나 새로이 source­initialed route rediscovery을 수행하여 전송 delay 및 control traffic overhead 등을 높이는 결과를 발생 시켰다. 본 논문은 single path로 구성되는 AODV 프로토콜의 route failures시 문제점을 보완한 Associativity Based Redundancy path Routing(ABRR) 및 Alternate Redundancy path Routing(ARR) schemes을 제안한다. 첫째, ABRR은 main path상에 있는 각 노드들은 associativity based stable node 정보를 이용하여 path broken 이전에 local redundancy path을 구성하여 path broken시 local routing없이 route을 복구할 수 있게 하고 둘째, ARR은 source­initialed route discovery에 의해 alternate path을 구성하여 ABRR 그리고 local routing에 의해 main route recovery 실패 시 alternate path을 main path로 전환하여 control traffic overhead 및 전송 delay을 줄이게 한다.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.3
• /
• pp.327-334
• /
• 2011

It is necessary that UGV(Unmanned Ground Vehicle) should generate a real-time travesability index map by analyzing raw terrain information to travel autonomously tough terrain which has various slope and roughness values. In this paper, we propose a local path planning method, $MA^*$(Modified $A^*$) algorithm, using DVGM (Directional Velocity Grid Map) for unmanned ground vehicle. We also present a path optimization algorithm and a path smoothing algorithm which regenerate a pre-planned local path by $MA^*$ algorithm into the reasonable local path considering the mobility of UGV. Field test is conducted with UGV in order to verify the performance of local path planning method using DVGM. The local path planned by $MA^*$ is compared with the result of $A^*$ to verify the safety and optimality of proposed algorithm.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.16 no.6
• /
• pp.726-732
• /
• 2013

It is required for UGV(Unmanned Ground Vehicle) to have a LPP(Local Path Plan) component which generate a local path via the center of road by analyzing binary map to travel autonomously unpaved road in rough environment. In this paper, we present the method of boundary estimation for unpaved road and a local path planning method based on RANGER algorithm using the estimated boundary. In specially, the paper presents an approach to estimate road boundary and the selection method of candidate path to minimize the problem of zigzag driving based on Bayesian probability reasoning. Field test is conducted with scenarios in rough environment in which bush, tree and unpaved road are included and the performance of proposed method is validated.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.4
• /
• pp.88-98
• /
• 1994

A new local path planning algorithm for free-ranging robots is proposed. Considering that a laser range finder has the excellent resolution with respect to angular and distance measurements, a simple local path planning algorithm is achieved by a directional weighting method for obtaining a heading direction of nobile robot. The directional weighting method decides the heading direction of the mobile robot by estimating the attractive resultant force which is obtained by directional weighting function times range data, and testing whether the collision-free path and the copen parthway conditions are satisfied. Also, the effectiveness of the established local path planning algorithm is estimated by computer simulation in complex environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.35 no.1
• /
• pp.39-46
• /
• 2012

An unmanned aerial vehicle (UAV) is a powered aerial vehicle that does not carry a human operator, uses aerodynamic forces to provide vehicle lift, can fly autonomously or be piloted remotely, can be expendable or recoverable, and can carry a lethal or non-lethal payload. An UAV is very important weapon system and is currently being employed in many military missions (surveillance, reconnaissance, communication relay, targeting, strike, etc.) in the war. To accomplish UAV's missions, guarantee of survivability should be preceded. The main objective of this study is a local path planning to maximize survivability for UAV on the battlefield of dynamic threats (obstacles, surface-to-air missiles, radar etc.). A local path planning is capable of producing a new path in response to environmental changes. This study suggests a $Smart$ $A^*$ (Smart A-star) algorithm for local path planning. The local path planned by $Smart$ $A^*$ algorithm is compared with the results of existing algorithms ($A^*$ $Replanner$, $D^*$) and evaluated performance of $Smart$ $A^*$ algorithm. The result of suggested algorithm gives the better solutions when compared with existing algorithms.

• Structural Engineering and Mechanics
• /
• v.5 no.5
• /
• pp.577-586
• /
• 1997

In nonlinear finite element stability analysis of structures, the foremost necessary procedure is the computation to precisely locate a singular equilibrium point, at which the instability occurs. The present study describes global and local procedures for the computation of stability points including bifurcation points and limit points. The starting point, at which the procedure will be initiated, may be close to or arbitrarily far away from the target point. It may also be an equilibrium point or non-equilibrium point. Apart from the usual equilibrium path, bypass and homotopy path are proposed as the global path to the stability point. A local iterative method is necessary, when it is inspected that the computed path point is sufficiently close to the stability point.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.15 no.3
• /
• pp.1-9
• /
• 2007

A major concern for Autonomous Military Robot in the rough terrain is the problem of moving robot from an initial configuration to goal configuration. In this paper, We generate a local path to looking for the best route to move an goal configuration while avoiding known obstacle from world model, not violating the mobility constraints of robot. Trough a Simulator for Unmanned Autonomous Vehicle, We can simulate a traversability of unmanned autonomous vehicle based on steering, acceleration, braking command obtained from local path planning.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.20 no.6
• /
• pp.803-812
• /
• 2017

This paper proposes a local path planning method for stable autonomous driving in rough terrain. There are various path planning techniques such as candidate paths, star algorithm, and Rapidly-exploring Random Tree algorithms. However, such existing path planning has limitations to reflecting the stability of unmanned ground vehicles. This paper suggest a path planning algorithm that considering the stability of unmanned ground vehicles. The algorithm is based on the genetic algorithm and assumes to have probability based obstacle map and elevation map. The simulation result show that the proposed algorithm can be used for real-time local path planning in rough terrain.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.2
• /
• pp.171-179
• /
• 2010

A fundamental technology of UGV(Unmanned Ground Vehicle) to perform a given mission with success in various environment is a path planning method which generates a safe and optimal path to the goal. In this paper, we suggest a local path-planning method of UGV based on the binary map using world model data which is gathered from terrain perception sensors. In specially, we present three core algorithms such as shortest path computation algorithm, path optimization algorithm and path smoothing algorithm those are used in the each composition module of LPP component. A simulation is conducted with M&S(Modeling & Simulation) system in order to verify the performance of each core algorithm and the performance of LPP component with scenarios.