• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.4
• /
• pp.591-595
• /
• 1993

A trial involving 200 day-old 288 Shaver chicks in a randomized experimental design tested the effects of using diets based on local feed materials (LF). Commercial imported counterpart feeds (CF) served as control diets. Birds were raised from 0-6 w on Chick Starter feed, from 7-17 w on Pullet Developer feed and from 18 to 72 w on Layer feed. The results obtained indicated that there were no significant differences in the performance of birds fed LF and CF diets during the Chick Starter and Pullet Developer phases. During the Laying phase, there were also no differences in laying percentage, (66 vs 65) and in egg size (62 vs 63 g) between LF and CF diets. Feed cost was lower on LF diet had a better egg yolk colour score, (4 vs 1) than those fed on CF diet. Feed cost was lower on LF than CF diets and the feed cost for producing eggs was approximately 50 percent lower on LF compared to CF (P$ 0.06 vs P$ 0.12). It was concluded that the use of locally available feed resources produces comparable performance to that obtained using commercial imported feeds. Secondly, using local materials markedly reduces feed cost and cost of producing eggs.

• Asian-Australasian Journal of Animal Sciences
• /
• v.5 no.1
• /
• pp.97-100
• /
• 1992

Locally available milk mix, coconut meal, cassava root meal, cassava leaf meal, maize, meat meal, fish meal, rice bran, rice polishings, wallow, molasses and coral sand in Fiji were analysed for proximate components, gross energy and mineral contents. The results obtained indicated typical and variable amounts of nutrients in these materials. On the basis of their nutrient contents, the potential usefulness and weaknesses of the various feed materials are discussed with specific reference to the formulations of diets for livestock and poultry in Fiji based on these locally available feed materials.

• Journal of Microbiology and Biotechnology
• /
• v.27 no.12
• /
• pp.2180-2189
• /
• 2017

Psychrophilic phytases suitable for aquaculture are rare. In this study, a phytase of the histidine acid phosphatase (HAP) family was identified in Morchella importuna, a psychrophilic mushroom. The phytase showed 38% identity with Aspergillus niger PhyB, which was the closest hit. The M. importuna phytase was overexpressed in Pichia pastoris, purified, and characterized. The phytase had an optimum temperature at $25^{\circ}C$, which is the lowest among all the known phytases to our best knowledge. The optimum pH (6.5) is higher than most of the known HAP phytases, which is fit for the weak acidic condition in fish gut. At the optimum pH and temperature, MiPhyA showed the maximum activity level ($2,384.6{\pm}90.4{\mu}mol{\cdot}min^{-1}{\cdot}mg^{-1}$, suggesting that the enzyme possesses a higher activity level over many known phytases at low temperatures. The phytate-degrading efficacy was tested on three common feed materials (soybean meal/rapeseed meal/corn meal) and was compared with the well-known phytases of Escherichia coli and A. niger. When using the same amount of activity units, MiPhyA could yield at least $3{\times}$ more inorganic phosphate than the two reference phytases. When using the same weight of protein, MiPhyA could yield at least $5{\times}$ more inorganic phosphate than the other two. Since it could degrade phytate in feed materials efficiently under low temperature and weak acidic conditions, which are common for aquacultural application, MiPhyA might be a promising candidate as a feed additive enzyme.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.6
• /
• pp.59-69
• /
• 2021

Directed energy deposition (DED) is an additive manufacturing technology involving a focused high-power laser or electron beam propagating over the substrate, resulting in melt pool formation while simultaneously supplying metal powder to the melt pool area to deposit the material. DED is performed to repair and strengthen parts in various applications, as it can be easily integrate local area cladding and cross-material deposition. In this study, we characterize stainless steel 316 L parts fabricated via DED based on various deposition conditions and geometries to widen the application of DED. The deposition characteristics are investigated by varying the laser power and powder feed rate. Multilayer deposition with a laser power of 362 W and a powder feed rate of 6.61 g/min indicate a height closest to the design value while affording high surface quality. The microhardness of the specimen increases from the top to the bottom of the deposited area. Tensile tests of specimens with two different deposition directions indicate that horizontally long specimens with respect to a substrate demonstrate a higher ultimate tensile strength and yield strength than vertically long specimens with lower elongation.

• Journal of Welding and Joining
• /
• v.28 no.6
• /
• pp.35-39
• /
• 2010

Generally, ceramic material is very difficult to machine due to high strength and hardness. However, ceramic material can be machined at high temperature by plastic flow as metallic material due to the deterioration of the grain boundary glassy phase. Recently, a new method was developed to execute cutting process with CBN cutting tool by local heating of surface with laser. There are various parameters in LAM because it is a complex process with laser treatment and machining. During laser assisted machining, high power results in reducing of cutting force and increasing tool life, but excessive power brings oxidation of the surface. The effect of laser power, feed rate, cutting depth and etc. were investigated on the life of cutting tool. Chips were observed to find out suitable machining conditions. Chips of SSN had more flow-types than HIPSN. It means SSN is easier to machining. The life of cutting tool was increased with increasing laser power and decreasing feed rate and cutting depth.

• Journal of Advanced Marine Engineering and Technology
• /
• v.39 no.2
• /
• pp.136-142
• /
• 2015

The shell and tube heat exchanger is an essential part of a power plant for recovering transfer heat between the feed water of a boiler and the wasted heat. The baffles are also an important element inside the heat exchanger. Internal materials influence the flow pattern in the bed. The influence of baffles in the velocity profiles was observed using a three-dimensional PIV (Particle Image Velocimetry) around baffles in a horizontal circular tube. The velocity of the particles was measured before the baffle and between them in the test tube. Results show that the velocity vectors near the front baffle flow along the vertical wall, and then concentrate on the upper opening of the front baffle. The velocity profiles circulate in the front and rear baffle. These profiles are related to the Reynolds number (Re) or the flow intensity. Velocity profiles at lower Re number showed complicated mixing to obtain the velocities and concentrate on the lower opening of the rear baffle as front wall. Numerical simulations were performed to investigate the effects of the baffle and obtain the velocity profiles between the two baffles. In this study, a commercial CFD package, Fluent 6.3.21 with the turbulent flow modeling, k-${\epsilon}$ are adopted. The path line and local axial velocities are calculated between two baffles using this program.

• Journal of the Korea Concrete Institute
• /
• v.20 no.6
• /
• pp.705-712
• /
• 2008

This study carried out simulation for structural layout design for concrete structures by using the models of the ground structure method. The micro lattice truss is modeled as assemblage of a number of unit cells. The progress of analysis repeat to undergo finite element analysis to feed-back results of stress to the stiffness of each member. Through the repeated this analysis, truss model is represented to form the topological materials and the structural shape with the use of the local stress condition without mathematical optimum tools. It is successful to analyse the shape-layout problem as numerical samples on the lattice truss model.

• Nutrition Research and Practice
• /
• v.2 no.3
• /
• pp.165-170
• /
• 2008

Protein-energy malnutrition is regarded as one of the public health problems in developing countries as a result of poor feeding practices due to poverty. This study, therefore, aimed at evaluating nutritional quality of a potential weaning food formulated from locally available food materials. The cooking banana fruit(CB) and bambara groundnut seeds(BG) were purchased from local market in Akure, Ondo State, Nigeria. The CB and BG were processed into flours, mixed in ratios of 90:10, 80:20, 70:30 and 60:40 and subjected into proximate, sensory and biochemical analyses using standard procedures. Nutrend(a commercial formula) and ogi(corn gruel, a traditional weaning food) were used as control. The nutritient composition(g/100 g) of the food samples were ranged as follows: moisture 2.94-6.94, protein 7.02-16.0, ash 1.76-2.99, fat 0.76-8.45, fibre 1.52-3.75, carbohydrate 63.84-88.43 and energy 1569.8-1665.7 kcal. The biological value(BV), net protein retention(NPR), protein efficiency ratio(PER) and feed efficiency ratio(FER) of the experimental food samples were significantly(p<0.05) lower than nutrend, but higher than ogi. The haematological variables of rats fed with formulated food samples, commercial formula(nutrend) and traditional weaning food(ogi) were not significantly(p>0.05) influenced by the dietary treatment. However, the values obtained for red blood cell(RBC), white blood cell(WBC), pack cell volume(PCV) and erythrocyte sedimentation rate(ESR) were higher in the experimental food samples than the commercial food. The growth rate of animals fed with experimental food samples were lower than those fed with the nutrend, but higher than those fed with ogi. In conclusion, the nutritional quality of CB and fermented BG mix of 60:40 ratio was better than ogi; and comparable to the nutrend. This implies that it can be used to replace low quality traditional weaning food and the expensive commercial weaning formula.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.11 no.4
• /
• pp.233-238
• /
• 1978

Rainbow trout were reared in a stainless steel aquarium from Nov. 11, 1977 to June 12, 1978, and the following results were obtained : 1. The volume of water was about $400\iota$ in a aquarium measuring $1m\;(Length)\times1m\;(Width)\times67cm(Height)$ and water depth 40 cm. Water was supplied for about 16 hours daily at a rate $3\iota/min$ and was drained through the conical settling part in the middle of the aquarium bottom. Filter tank was about $23cm(W)\times23cm(L)\times40cm(D)$ and contained pebbles 30 cm in depth. Water recirculation rate was at)out $1,030\iota/hr$, or 2.6 turn-over per hour. 2. During the first period (77 days), the trout grew from 88.3g to 229g in average, the total weight attaining 30.7kg. The food coefficient was 1.249, average daily increment 243.3g, average daily growth rate 1.245%, and the mortality was 2 smallest fish weighing 53 g, owing to unknown reason. During the second period (135 days), the trout grew from 239g to 555g in average, the total weight attaining 57.2 kg. The food coefficient was 1.447, average daily increment 279.8g, average daily growth rate $0.65\%$ and the mortality was 31 fish weighing 11,255 g, owing partly to miss-handling and partly to disease. 3. The feed consisting of fully domestic materials was prepared in this laboratory, and the feed conversion was not inferior to high protein commercial feed available in foreign countries. 4. The result of whole period for 212 days was 56.5 kg in gross increment, and based on this result, when $1\iota/min$ full day inflowing water available, the net production will become 28.25 kg. So, if a 5000kg production is planned, $180\iota/min$ or about $10.8m^3/hr$ be reauired, and the production in value frill become 15million won at local price at the expense of about 5.3 million won. From the result of this experiment, rainbow trout is feasible for commercial production in Korea with relatively small amount of well water and simplified water recirculation system.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.60 no.2
• /
• pp.75-84
• /
• 2018

Thermal stress of livestock has been issued due to recent climate change trends and this causes reproductive disorders, decreased feed consumption, immunosuppression, and increased mortality of animals. Concept of THI has been widely used to quantitatively evaluate the degree of thermal stress for animals, however use of this concept is restricted for animals living in the enclosed facilities such as mechanically ventilated broiler houses. In this study, time-based internal energy flow and variation trends of temperature and humidity were analyzed based on BES technique. Local weather data, insulation characteristics of building materials, heat and moisture generation rate from broilers according to age, algorithm of ventilation operation were adopted for boundary condition of the model to accurately compute THI values inside the mechanically ventilated broiler house. From the BES computation, excess frequency of THI threshold in Jeju city was highest on the assumption that air conditioning equipments were not installed. When general raising density ($39kg\;m^{-2}$) was adopted, total 2,191 hours were exceeded. Excess hours of THI threshold were strongly related to the cumulative air temperature ($R^2=0.87$).