DDInSAR 영상을 이용한 남극 로스 빙붕의 조위변형과 물성 분석 (Analysis of Tidal Deflection and Ice Properties of Ross Ice Shelf, Antarctica, by using DDInSAR Imagery)
-
- 대한원격탐사학회지
- /
- 제35권6_1호
- /
- pp.933-944
- /
- 2019
이 연구에서는 영상레이더(synthetic aperture radar; SAR) 이중차분간섭기법(Double-Differential Interferometric SAR; DDInSAR)을 이용하여 남극 로스 빙붕(Ross Ice Shelf)의 동쪽(A지역)과 서쪽(B지역)에 위치한 육지 경계부 지역의 조위변형을 분석하고, 조위예측 모델의 정밀도와 빙붕의 영률(Young's modulus) 추정을 위해 2015-2016년에 획득된 총7장의 Sentinel-1A SAR 영상을 획득하였다. 먼저, 남극 로스해(Ross Sea)에 대한 대표적인 조위예측 모델인 Ross Sea Height-based Tidal Inverse (Ross_Inv) 모델과 DDInSAR영상에서 추출된 빙붕의 조위변형을 비교한 결과, 모델의 조위예측 오차는 동쪽에서는 3.86 cm로 분석되었으며 조위모델에서 역기압효과가 필수적으로 보정되어야 함을 확인하였다. 그러나 서쪽에서는 역기압효과 보정 후에도 큰 오차가 발생하여 조위모델이 부정확할 수 있음을 확인했다. 또한, 조위변형이 나타나는 힌지 영역(hinge zone)의 폭과 얼음두께의 상관성을 나타내는 1차원 탄성 보 모델에 의거하여 얼음의 영률을 계산하였다. 이를 위해 DDInSAR 영상에서 조위에 의한 변위가 나타나기 시작하는 곳을 지반선(grounding line)으로, 조위에 의한 최대변위가 나타나는 지점을 힌지선(hinge line)으로 새롭게 정의했고, 이두선 사이를 힌지 영역으로 정의했다. 반무한 평면체를 가정한 1차원 탄성 보 모델에 의하면 힌지 영역의 폭은 얼음두께의 0.75승에 정비례한다. DDInSAR에서 나타나는 힌지 영역 중 지반선과 힌지선이 직선에 가까운 지역에서 힌지 영역의 폭을 측정하였고, 이를 BEDMAP2 얼음 두께의 0.75승과의 선형 회귀 분석을 통해 로스 빙붕 동쪽과 서쪽 힌지 영역의 영률을 1.77±0.73 GPa로 추정할 수 있었다. 이러한 방법으로 향후 Sentinel-1 영상이 축적되면 더 정밀한 영률을 추정할 수 있을 것으로 기대된다.
The increasing functional needs of top-quality printing papers and packaging paperboards, and especially the rapid developments in electronic printing processes and various computer printers during past few years, set new targets and requirements for modern paper quality. Most of these paper grades of today have relatively high filler content, are moderately or heavily calendered , and have many coating layers for the best appearance and performance. In practice, this means that many of the traditional quality assurance methods, mostly designed to measure papers made of pure. native pulp only, can not reliably (or at all) be used to analyze or rank the quality of modern papers. Hence, introduction of new measurement techniques is necessary to assure and further develop the paper quality today and in the future. Paper formation , i.e. small scale (millimeter scale) variation of basis weight, is the most important quality parameter of paper-making due to its influence on practically all the other quality properties of paper. The ideal paper would be completely uniform so that the basis weight of each small point (area) measured would be the same. In practice, of course, this is not possible because there always exists relatively large local variations in paper. However, these small scale basis weight variations are the major reason for many other quality problems, including calender blacking uneven coating result, uneven printing result, etc. The traditionally used visual inspection or optical measurement of the paper does not give us a reliable understanding of the material variations in the paper because in modern paper making process the optical behavior of paper is strongly affected by using e.g. fillers, dye or coating colors. Futhermore, the opacity (optical density) of the paper is changed at different process stages like wet pressing and calendering. The greatest advantage of using beta transmission method to measure paper formation is that it can be very reliably calibrated to measure true basis weight variation of all kinds of paper and board, independently on sample basis weight or paper grade. This gives us the possibility to measure, compare and judge papers made of different raw materials, different color, or even to measure heavily calendered, coated or printed papers. Scientific research of paper physics has shown that the orientation of the top layer (paper surface) fibers of the sheet paly the key role in paper curling and cockling , causing the typical practical problems (paper jam) with modern fax and copy machines, electronic printing , etc. On the other hand, the fiber orientation at the surface and middle layer of the sheet controls the bending stiffness of paperboard . Therefore, a reliable measurement of paper surface fiber orientation gives us a magnificent tool to investigate and predict paper curling and coclking tendency, and provides the necessary information to finetune, the manufacturing process for optimum quality. many papers, especially heavily calendered and coated grades, do resist liquid and gas penetration very much, bing beyond the measurement range of the traditional instruments or resulting invonveniently long measuring time per sample . The increased surface hardness and use of filler minerals and mechanical pulp make a reliable, nonleaking sample contact to the measurement head a challenge of its own. Paper surface coating causes, as expected, a layer which has completely different permeability characteristics compared to the other layer of the sheet. The latest developments in sensor technologies have made it possible to reliably measure gas flow in well controlled conditions, allowing us to investigate the gas penetration of open structures, such as cigarette paper, tissue or sack paper, and in the low permeability range analyze even fully greaseproof papers, silicon papers, heavily coated papers and boards or even detect defects in barrier coatings ! Even nitrogen or helium may be used as the gas, giving us completely new possibilities to rank the products or to find correlation to critical process or converting parameters. All the modern paper machines include many on-line measuring instruments which are used to give the necessary information for automatic process control systems. hence, the reliability of this information obtained from different sensors is vital for good optimizing and process stability. If any of these on-line sensors do not operate perfectly ass planned (having even small measurement error or malfunction ), the process control will set the machine to operate away from the optimum , resulting loss of profit or eventual problems in quality or runnability. To assure optimum operation of the paper machines, a novel quality assurance policy for the on-line measurements has been developed, including control procedures utilizing traceable, accredited standards for the best reliability and performance.
Background : Although there are growing concerns about the adverse health effect of air pollution, not much evidence on health effect of current air pollution level had been accumulated yet in Korea. This study was designed to evaluate the chronic health effect of ai. pollution using Korean Medical Insurance Corporation (KMIC) data and air quality data. Medical insurance data in Korea have some drawback in accuracy, but they do have some strength especially in their national coverage, in having unified ID system and individual information which enables various data linkage and chronic health effect study. Method : This study utilized the data of Korean Environmental Surveillance System Study (Surveillance Study), which consist of asthma, acute bronchitis, chronic obstructive pulmonary diseases (COPD), cardiovascular diseases (congestive heart failure and ischemic heart disease), all cancers, accidents and congenital anomaly, i. e., mainly potential environmental diseases. We reconstructed a nested case-control study wit5h Surveillance Study data and air pollution data in Korea. Among 1,037,210 insured who completed? questionnaire and physical examination in 1992, disease free (for chronic respiratory disease and cancer) persons, between the age of 35-64 with smoking status information were selected to reconstruct cohort of 564,991 persons. The cohort was followed-up to 1995 (1992-5) and the subjects who had the diseases in Surveillance Study were selected. Finally, the patients, with address information and available air pollution data, left to be 'final subjects' Cases were defined to all lung cancer cases (424) and COPD admission cases (89), while control groups are determined to all other patients than two case groups among 'final subjects'. That is, cases are putative chronic environmental diseases, while controls are mainly acute environmental diseases. for exposure, Air quality data in 73 monitoring sites between 1991 - 1993 were analyzed to surrogate air pollution exposure level of located areas (58 areas). Five major air pollutants data, TSP,
스마트 시티 서비스 중 방범·방재 분야가 2018년 기준 가장 높은 24%를 차지하고 있으며, 실시간 상황정보제공에 가장 중요한 플랫폼은 CCTV(Closed-Circuit Television) 이다. 이러한 CCTV의 활용을 극대화 하기 위해서는 CCTV가 제공하는 실질적인 감시 영역을 파악하는 것이 필수적이다. 하지만 국내에 설치된 CCTV양은 지자체 관리대상 포함 100만대를 넘고 있다. 이러한 방대한 양의 CCTV의 가시영역을 수동적으로 파악해야 하는 것은 문제점으로 제기되고 있다. 이에 본 연구에서는 CCTV의 실질적 가시권 영역 데이터를 효율적으로 구축하고, 관리자가 상황 파악에 소요되는 시간을 단축하는 방안을 제시하고자 하였다. 이를 위하여 첫째, 접근이 어려운 기 설치된 CCTV 카메라의 외부표정요소와 초점 거리를 MMS(Mobile Mapping System)의 점군 데이터를 활용하여 계산하고, 이 결과를 활용하여 FOV(Field of View)를 계산하였다. 둘째, 첫 단계에서 계산된 FOV 결과를 이용하여 건물에 의하여 발생하는 폐색 영역을 고려하여 CCTV의 실질적 감시 영역을 그리드 단위 1 m, 2 m, 3 m, 5 m, 10 m 폴리곤 데이터로 구축하였다. 이 방법을 경상북도 울진군에 위치한 5개소의 CCTV 영상에 적용한 결과, 평균 재투영 오차는 약 9.31 pixel, 공공데이터포털(Data Portal)에서 제공하는 위·경도 좌표와의 거리는 평균 약 10 m의 거리 차이가 발생하였고, MMS를 통해 취득한 점군 데이터 상의 CCTV 위치 좌표 값과는 평균 약 1.688 m의 위치 차이를 나타냈다. 단위 그리드의 한 변의 크기가 3 m인 경우, 본 연구를 통하여 계산된 감시 영역 폴리곤은 육안으로 확인한 실제 감시 영역과 최소 70.21%에서 최대 93.82%까지 일치함을 확인할 수 있었다.
지구 자기장의 고영년변화(PSV)를 이용하면 시대 미상의 고고학적 유적에 대한 연대측정이 가능하며, 이를 고고지자기 연대측정 기법이라 한다. 고고지자기 연대측정을 위해서는 비쌍극자기장을 반영하는 그 지역의 PSV 모델이 필요하다. 그동안 국내에서는 자료의 부족으로 시험적 한반도 영년변화 곡선(t-KPSV)을 사용하였으나, 이는 서남 일본의 영년변화(JPSV)로부터 수학적인 계산을 사용한 곡선이므로, 비쌍극자기장의 영향을 고려하지 못하여 신뢰성이 부족하다. 이번 연구는 그동안 한반도에서 수행된 고고지자기학적 연구 결과와 이미 발표되어 신뢰할 수 있는 연구 자료를 바탕으로 한반도 삼국 시대(원삼국 시대 포함)에 해당하는 AD 1~600년 동안의 PSV를 분석하여 곡선을 제시하였다. 제시된 PSV 곡선은 전 지구적 지자기 예측 모델과 비교 분석하였으며, 시험적 한반도 고영년변화(t-KPSV) 곡선과도 비교하였다. 선별된 고고지자기 방향 자료는 시료 수(N) ≥ 6개와 높은 신뢰도를 보이는 통계자료(𝛼95 ≤ 7.8°, k ≥ 57.8)를 보였으며, 전국의 16개 지역에서 총 49개의 자료로 구성된다. 수집한 자료의 고고학적 연대는 방사성 탄소연대측정 결과와 고고학적 편년을 사용하였고, 연대 오차는 ±200년 이하의 기준으로 선별하였다. 선별된 자료들은 편각 341.7~20.1°, 복각 43.5~60.3°의 범위에 분포하며, 이동창문기법(moving window method)을 사용하여 과거 600년간 한반도 PSV 곡선인 KPSV0.6k를 제시하였다. 제시된 모델은 기존의 t-KPSV 곡선과 차이를 보이며, 전 지구적 지자기 모델(ARCH3K.1, CALS3K.4, SED3K.1)에 대비한 결과, 모델들과 방향의 변화 경향이 일치하였으며, 특히 ARCH3K.1 모델이 본 연구에서 제시한 KPSV0.6k와 가장 잘 일치하였다. 이러한 결과는 한국과 일본이 지리적으로는 근접해 있으나 비쌍극자기장 영향이 매우 다르게 나타나며, 따라서 이러한 영향이 고려된 전 지구적 모델이 한반도의 영년변화를 보다 잘 나타낼 수 있는 것으로 해석된다. 따라서 고고지자기 연대측정을 위해서 독자적 영년변화 곡선 구축이 필요하며, 보다 정교한 전 지구적 모델을 위해 보다 많은 신뢰성 높은 한반도의 고고지자기 자료 확보가 필요한 것으로 판단된다. 실제 고고학적 유적지를 대상으로 실시한 고고지자기 연대측정 결과, KPSV0.6k와 ARCH3K.1 모델에선 고고학적 편년과 일치하는 연대를 제시하였다.
산악지역의 기상정보를 상세하고 적절히 제공하기 위해 산림청에서는 2012년부터 전국 주요 산악지역을 대상으로 산악기상관측망(Automatic Mountain Meteorology Observation Station, AMOS)을 구축하여, 2022년 현재 464개의 관측소가 운영되고 있다. 본 연구에서는 AMOS 지점 관측을 이용하여 우리나라 산림에 적합한 기온 격자자료를 산출하기 위해서, 기온감률 보정을 적용한 최적의 크리깅(kriging) 기법을 제안하고 그 가용성을 평가하였다. 우선 통계적 처리를 통해 AMOS 기온자료의 이상치를 제거하였고, 이 자료를 이용하여 경험 베리오그램(variogram)에 가장 근사하는 이론 베리오그램을 도출하여 최적화 크리깅을 수행하였다. 이 때 기온감률 보정(lapse rate correction)을 적용하여 산악지형의 고도 변이가 반영되는 500 m 해상도의 기온격자지도를 생성하였다. 공간적으로 치우치지 않은 검증샘플을 이용한 암맹평가를 통해 본 기법의 가용성을 평가한 결과, 0.899-0.953의 상관계수 및 0.933-1.230℃의 오차를 나타내 기온감률 보정을 적용하지 않은 정규크리깅에 비해 정확도가 다소 향상되었다. 또한 기온감률 크리깅은 우리나라 산림의 복잡지형을 잘 표현하여, 강원도 산간지역과 해안산림지역의 국지적인 변이 및 지리산·내장산과 그 주변 산림의 지형적 차이와 같은 미세한 지역특성을 살릴 수 있다는 것이 가장 큰 장점이라고 할 수 있다.
외부 환경변화에 민감한 양서류는 지역 내 생태환경의 변화나 교란을 평가하는 생물지표종으로 활용되고 있다. 도시화로 인한 서식지 파괴, 단절과 같은 인위적인 위협으로 인해 무미목 양서류 종 3분의 1이 멸종 위험에 처한 것으로 알려져있다. 무미목 양서류의 적절한 보호 및 보전전략 마련을 위해서는 개체군의 특성을 고려한 생물종 조사가 요구된다. 본 연구는 무미목 양서류의 번식기 울음소리를 이용한 생태모니터링에 있어 시민들의 참여 가능성을 모색하고자 하였다. 또한 적절한 품질관리 방안을 제안하여 오류나 편향을 제거하고 신뢰도 높은 생물종 출현 자료를 추출하고자 하였다. 시민과학 프로젝트는 국내에 서식하는 무미목 양서류 12종을 대상으로 2022년 4월 1일부터 8월 31일까지 전국을 대상으로 수행되었다. 시민들의 자발적인 참여를 통해 무미목 양서류의 번식기 울음소리를 직접 청취하고 모바일 애플리케이션을 통해 녹음함으로써 음성신호 모니터링이 진행되었다. 또한 품질관리 프로세스를 구축하여 시민들로부터 수집된 데이터의 오류 및 편향을 누락, 허위, 잘못된 식별과 같이 3단계로 분류하여 신뢰도 높은 생물종 출현 자료를 추출하고자 하였다. 시민참여 무미목 양서류 음성신호 모니터링 결과 총 6,808건의 관찰 기록을 수집할 수 있었다. 품질관리 프로세스를 통해 6,808건의 데이터 중 1,944건(28.55%)에서 오류 및 편향이 발생하였다. 오류 및 편향 유형으로는 누락이 922건 (47.43%)으로 높은 빈도를 보였으며 잘못된 식별 540건(27.78%), 허위 482건(24.79%) 순서로 나타났다. 시민과학프로젝트를 통해 국내에 서식하는 12종의 무미목 양서류 중 두꺼비(Bufo gargarizans Cantor), 한국산개구리(Rana coreana)를 제외한 10종의 무미목 양서류의 번식기 울음소리를 관찰할 수 있었다. 주로 개체수 감소로 인하여 관찰이 어렵거나 비 출현 개체의 번식기와 시민과학 프로젝트 진행 시점과의 차이로 인해 번식기 울음소리를 수집하는데 어려움이 발생한 것으로 나타났다. 본 연구는 시민참여를 토대로 국내에 서식하는 무미목 양서류의 번식기 울음소리를 통해 분포현황과 생물종 출현 자료 수집을 처음으로 검토한 연구이다. 향후 시민과학을 접목한 생물음향 모니터링 설계와 시민과학 데이터 품질관리 방안에 대한 기초자료로 활용될 수 있을 것으로 판단된다.
연구배경: 폐결핵의 진단은 결핵균이 배양되면 확진이 되나, 실제 임상에서는 세균학적 진단이 양성으로 나타나지 않는 폐결핵 환자가 다수 존재하므로 활동성 위한 빠르고 확실한 진단방법이 임상에서 절실히 요구되고 있다,
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70
The wall shear stress in the vicinity of end-to end anastomoses under steady flow conditions was measured using a flush-mounted hot-film anemometer(FMHFA) probe. The experimental measurements were in good agreement with numerical results except in flow with low Reynolds numbers. The wall shear stress increased proximal to the anastomosis in flow from the Penrose tubing (simulating an artery) to the PTFE: graft. In flow from the PTFE graft to the Penrose tubing, low wall shear stress was observed distal to the anastomosis. Abnormal distributions of wall shear stress in the vicinity of the anastomosis, resulting from the compliance mismatch between the graft and the host artery, might be an important factor of ANFH formation and the graft failure. The present study suggests a correlation between regions of the low wall shear stress and the development of anastomotic neointimal fibrous hyperplasia(ANPH) in end-to-end anastomoses. 30523 T00401030523 ^x Air pressure decay(APD) rate and ultrafiltration rate(UFR) tests were performed on new and saline rinsed dialyzers as well as those roused in patients several times. C-DAK 4000 (Cordis Dow) and CF IS-11 (Baxter Travenol) reused dialyzers obtained from the dialysis clinic were used in the present study. The new dialyzers exhibited a relatively flat APD, whereas saline rinsed and reused dialyzers showed considerable amount of decay. C-DAH dialyzers had a larger APD(11.70