• 한국포장학회지
• /
• 제26권1호
• /
• pp.11-17
• /
• 2020

This study conducted a case study and a questionnaire analysis in parallel. In the case study, a study was conducted on domestic manufacturer A by analyzing pallet loading efficiency of RRP(Retail Ready Packaging) products and pallet loading efficiency of MWC(Membership Wholesale Club) delivered products. As a result of the pallet loading efficiency simulation of 50 RRP products of Manufacturer A, it was 80.0% based on the T-11 type pallet and 84.3% based on the T-12 type pallet. It was found It refers that the route of producing the product from the manufacturer A and delivering it to the MWC A in the form of RRP resulted in the decrease of the pallet loading efficiency through the change of the loading pattern and the adjustment of the number of loads. As a result of analyzing the questionnaire about whether the overall efficiency of the supply chain will be improved if the operation of the packaging system considering the SCM(Supply Chain Management) aspect is χ² = 178.500, there was a statistically significant difference at the significance level of 0.000. Manufacturers and logistics companies answered "yes" the most, but distributors answered "is average" the most, confirming that the packaging can be constructed with the highest operational efficiency. Therefore, as a result of confirming the impact of packaging design considering the SCM aspect on logistics efficiency, it indicates the importance of closer collaboration between manufacturers and distributors.

• 폴리머
• /
• 제33권5호
• /
• pp.441-445
• /
• 2009

본 연구에서는 알부틴, ascorbic acid, 아데노신 등과 같은 화장품 활성물질들을 주변 pH 변화에 따라서 선택적으로 방출하게 하는 지능형 전달시스템을 개발하기 위하여, pH 감응성 P(MAA-co-PEGMA) 수화젤을 분산 광중합을 이용하여 평균 크기 약 $2{\mu}m$의 구형 입자로 합성하였으며, 수화젤 입자는 수화젤의 $pK_a$인 PH 5를 전후로 하여 급격한 팽윤비의 변화를 보여주었다. P (MAA-co-PEGMA) 수화젤에 대한 활성물질들의 탑재에 영향을 미치는 요인들을 알아내기 위하여, 수화젤의 MAA와 EG의 조성과 탑재 pH에 따른 활성물질들의 탑재효율을 조사하였다. 수화젤을 구성하는 MAA와 EG의 조성 중 MAA의 함량이 감소함에 따라서 활성물질들의 탑재효율이 증가하였으며, 탑재 pH에 따른 실험에서는 수화젤과 활성물질들 사이에 형성되는 정전기적 반발력이 최소가 되는 pH보다는 수화젤의 팽윤비가 높게 되는 pH에서 탑재효율이 더 높게 나타났다.

• 한국컴퓨터정보학회논문지
• /
• 제10권1호
• /
• pp.201-208
• /
• 2005

오늘날 컨테이너터미널의 운영방식의 변화를 통해 컨테이너터미널의 효율을 증대시키기 위한 대처방안에 대한 연구가 활발히 이루어지고 있다. 컨테이너터미널의 효율을 증대시키기 위해서는 적하계획 수립이 상당히 중요한 역할을 한다. 적하계획은 크게 적재의 위치를 결정하는 문제와 적재의 순서를 결정하는 문제로 나눌 수 있는데, 본 논문에서는 보다 효율적인 적재순서 결정 방안을 제시한다. 컨테이너 적재순서 결정 문제는 장치위치 및 운영 장비 등 여러 가지 경우의 수를 고려해야 하는 조합 최적화 문제이다. 컨테이너 적재순서를 결정하는 기존의 클러스터 구성방식은 재처리 문제로 작업의 효율성을 높이는데 한계가 있다. 따라서 선적지시서와 야드맵을 기초로 동일한 속성을 가진 컨테이너들을 계층적 클러스터링 방법을 적용하여 스택단위의 클러스터로 구성하고, 작업순서의 제약을 정의하는 보다 효율적인 컨테이너 적재순서결정 방법을 제안한다. 그 과정에서 작업순서 제약을 정의함으로서 클러스터간의 가능한 작업경로를 파악할 수 있고, 작업경로에 대한 제약적 탐색이 가능하여 기존의 방식에 비해 탐색효율이 증가됨을 알 수 있다.

• 펄프종이기술
• /
• 제36권2호
• /
• pp.70-76
• /
• 2004

The pallet loading pattern and efficiency were analyzed on the packaging boxes for agricultural products. Also, the pallet layout chart was proposed as a convenient tool in selecting the suitable packaging dimensions for them. By researching the layout pattern and maximum number of agricultural products in the packaging box, we can choose the efficient box dimension.

• 한국환경보건학회지
• /
• 제21권4호
• /
• pp.32-36
• /
• 1995

This study was carried out to investigate the treatment efficiency of sequencing batch reactor when the livestock nightsoil organic loading rate was varied. Sequencing batch reactor was operated with the variance of influent BOD concentration and operating cycle. The average influent BOD concentrations in this study were 150 mg/l, 200 mg/l, 250 mg/l, 300 mg/l, 350 mg/l, 400 mg/l, 450 mg/l and 500 mg/l in the condition of 1~3 cycles/day. The treatment efficiency of sequencing batch reactor is good at the volumetric loading of 0.05~0.20 kg $BOD/m^3\cdot day$. Therefore, sequencing batch reactor process would become an effective alternative for the process of small scale livestock nightsoil treatment plants.

• Journal of Advanced Marine Engineering and Technology
• /
• 제23권3호
• /
• pp.389-397
• /
• 1999

Recently the use of Pd catalyst have been continued to expand because of cost avaliabilityand performance advantages. Especially the Pd+Rh catalyst instead of the Pt+Rh catalyst had been used for most of three way catalysts because of the more stringent emission standards and its higher temperature effectiveness. The main purpose of this study is to investigate the design parameter impacts on the Pd+Rh cat-alyst for the automotive exhaust catalysts application. This study was investigated on the catalyst efficiency for the volume and the precious metal loading of the Pd+Rh ceramic monolithic cata-lyst. And experiments concerning the effects of volume and precious metal loading on Pd+Rh three way catalysts were conducted to examined the catalyst light-off temperature and conver-sion efficiency on higher volume demonstrated almost similar performance. But their effects on higher precious metal loading demonstrated considerably better performance.

• Journal of Microbiology and Biotechnology
• /
• 제9권3호
• /
• pp.265-270
• /
• 1999

A three phase fluidized bed bioreactor immobilized with Thiobacillus sp. IW was tested to remove hydrogen sulfide and methylmercaptan with high loading rate. In a single gas treatment, the bioreactor removed 92- 98％ of hydrogen sulfide with loading rate of 15- 66 g/l/h and removed 87-98％ of methylmercaptan with loading rate of 14-60 gl/sup -1/h/sup -1/. In the mixed gas treatment, the removal efficiencies of hydrogen sulfide and methylmercaptan maintained at 89-99％ for various inlet loading rates and were not affected by the inlet loading ratio of both gases in low loading rates. When the inlet concentration of methylmercaptan increased 3.8 times and was maintained for 30 h to observe the response of the bioreactor to sudden environmental change, the removal efficiency of methylmercaptan was maintained at an average of 91％.

• Journal of Pharmaceutical Investigation
• /
• 제31권4호
• /
• pp.241-256
• /
• 2001

Alginate microspheres, containing fluorescein isothiocyanate-bovine serum albumin (FITC-BSA) or green fluorescent protein (GFP) were prepared and used as a model drug to develop the oral vaccine delivery system. The alginate microspheres were coated with poly-L-lysine or chitosan. Two methods, w/o-emulsion and spray, were used to prepare alginate microspheres. To optimize preparation conditions, effects of several factors on the particle size and particle morphology of microsphere, and loading efficiency of model antigen were investigated. In both preparation methods, the particle size and the loading efficiency were enhanced when the concentration of sodium alginate increased. In the w/o-emulsion preparation method, as the concentration of Span 80 was increased from 0.5% to 2%, the particle size was decreased, but the loading efficiency was increased. The higher the emulsification speed was, the smaller the particle size and loading efficiency were. The concentration of calcium chloride did not show any effect on the particle size and loading efficiency. In the spray preparation method, the particle size was increased as the nozzle pressure $(from\;1\;kgf/m^2\;to\;3\;kgf/m^2)$ and spray rate was raised. Increasing calcium chloride concentration (<7%) decreased the particle size, in contrast to no effect of calcium chloride concentration on the w/o-emulsion preparation method. Alginate microspheres prepared by two methods were different in the particle size and loading efficiency, the particle size of microspheres prepared by the spray method was about $2-6\;{\mu}m$, larger than that prepared by the w/o emulsion method $(about\;2{\mu}m)$, and the loading efficiency was also higher with spray method. Furthermore, drying process for the microspheres prepared by the spray was simpler and easier, compared with the w/o emulsion preparation. Therefore, the spray method was chosen to prepare alginate microspheres for further experiments. Release pattern of FITC-BSA in alginate microspheres was evaluated in simulated intestinal fluid and PBS (phosphate buffered saline). Dissolution rate of FITC-BSA from alginate/chitosan microsphere was lower than that from alginate microsphere and alginate/poly-L-lysine microsphere. By confocal laser scanning microscope, it was revealed that alginate/FITC-poly-L-lysine microspheres were present in close apposition epithelium of the Peyer's patches of rabbits following inoculation into lumen of intestine, which proved that microspheres could be taken up by Peyer's patch. In conclusion, it is suggested that alginate microsphere prepared by spray method, showing a particle size of & $10\;{\mu}m$ and a high loading efficiency, can be used as a model drug for the development of oral vaccine delivery system.