• 유공압시스템학회논문집
• /
• 제4권2호
• /
• pp.7-20
• /
• 2007

TCU is a shift controller far automatic transmission of which major functions are to determine the shift point and manage the shifting process based on the various input signals. As the recent digital control technologies advance, it plays a key-role to improve a transmission performance and its algorithm becomes more complicated. This paper describes the development of transmission simulator fur wheel loader that enables a TCU for normal stand-alone operation by the real-time emulation of TCU interface signals. It can be utilized for the analysis of shift control algorithm implemented in a commercial TCU as well as for the development of brand new TCU.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2018년도 추계학술대회
• /
• pp.452-455
• /
• 2018

휠로더는 붐과 버켓을 제어하여 굴삭 및 덤핑 작업을 수행한다. 휠로더 장비 운전은 반복 작업이 많고, 작업환경이 열악하지만 오직 사람에 의한 수작업으로 진행되고 있다. 최근 전장품에서도 무인 자동화 시스템을 적용하려는 요구가 점차 증가하고 있다. 휠로더의 자동화 시스템은 안정된 제어를 위해 정확한 각도 검출을 검출이 필수적이다. 본 논문은 노이즈에 강인 하면서 정밀 각도 제어를 위한 신호처리시스템을 제안한다. 제안 시스템을 구현하여 휠로더 붐각도 시스템에 적용한 결과 약 0.1도 각도 변화 검출이 가능하였다.

• 문화기술의 융합
• /
• 제5권3호
• /
• pp.263-269
• /
• 2019

본 연구에서는 붐 길이를 측정할 수 있는 센서, 붐 및 로더의 좌우측의 경사를 측정할 수 있는 각도센서 그리고 리프팅 시 무게를 측정할 수 있는 로드셀 등의 여러 센서를 장착한 다목적 로더의 특성과 운행에 관련된 데이터 값을 디스플레이하는 시스템을 구현하였다. 시스템의 구성은 다음 각종 센서로부터 값을 읽어와 이를 차량제어기에 보내고 제어기에서 계산한 전복률 결과와 기타 중요한 정보를 디스플레이 장치에 CANOpen 프로토콜을 이용하여 전달하게 하였다. 또한 전복률 계산에 있어서는 다목적 로더의 구조가 중장비에 속하는 크레인의 구조와 비슷하여 크레인 전복률 계산방식을 사용하였으며 좌우 경사도에 따른 전복 위험성은 실험을 통하여 전복가능성이 있는 좌우 경사각을 추출하였다. 본 연구를 통하여 중장비 차량의 상태를 관찰하며 전복 등의 비상 상황을 디스플레이 장치를 통해 사전 인지할 수 있게 하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.687-689
• /
• 2000

Molten Carbonate Fuel Cell (MCFC) with high electrical efficiency and low environmental effect has been developed for the commercial application of power generation fields. Recently we have built a 25 kW molten carbonate fuel cell power generation system and tested it. The MCFC system is composed of diverse peripheral units such as reformer, pre-heater, water purifier. electrical loader, gas supplier, and recycling systems. The stack itself was made of 40 cells of $6.000 cm^2$ area each. The stack showed an output of 28.6 kW power and a reliable performance at atmospheric operation. while in pressurized operation the stack showed an output 25.6 kW lower than the atmospheric operation. The reason of lower performance of pressurized operation was caused from a gas cross over shown in few cells in the stack.

• 한국산업융합학회 논문집
• /
• 제24권3호
• /
• pp.363-371
• /
• 2021

Forest operations like timber harvesting have already been mechanized to reduce hazards to the worker and increase productivity. However, timber harvesting operations have still been considered potentially dangerous and expensive on steep terrain. Teleoperation, to control the timber harvesting machine at a distance, has the potential to improve the safety, productivity and efficiency of harvesting operations on steep terrain. To verify the effects of teleoperation, an experimental prototype system of a monitor image-based teleoperation was constructed using a real forestry machine. In this study, the productivity of excavator based grapple loader, which is one of the most used mechanized harvesting equipment in the timber production, was analyzed using time-study method. Factors like skill and age of operators, influencing loader productivity in timber loading operation were also evaluated by statistical analysis. Productivity analysis results showed that less experienced operators were more productive than experienced operators for teleoperation through image of monitors in the operator cabin. These results are shown to be unfamiliar to the monitor image and different loading operation pattern by operators. According to the results, the monitor image-based teleoperation system of forestry machine need to improve the resolution and installation position of camera. It was expected that additional studies will be needed for real-time remote control of forestry machine in the future.

• 드라이브 ㆍ 컨트롤
• /
• 제19권4호
• /
• pp.36-45
• /
• 2022

The aim of this study was to verify an E-driving system of a 44 kW-class electric tractor using agricultural workload data. Workload data were acquired during field test (plow tillage, rotary tillage, loader operation, field driving, asphalt driving) using a conventional tractor with a load measurement system. These workload data were converted to data of a 44 kW-class tractor based on the load factor of the engine. These data were used to verify the design of the E-driving system of an electric tractor. High-load operations such as plow tillage, rotary tillage, and loader operation could be performed at stage L and stage M. High-speed operation (asphalt driving) could be effectively performed at stage H using a rated rotational speed of the motor. As a result, the E-driving system of the electric tractor was possible to perform all major agricultural operations according to gear stages of range shift. Based on results of this research, we plan to develop an electric tractor equipped with an E-driving system and conduct research on actual vehicle verification in the future.

• 항공우주기술
• /
• 제7권1호
• /
• pp.83-90
• /
• 2008

차세대 저궤도 위성의 탑재소프트웨어 저장메모리는 부트 코드와 모니터 소프트웨어를 내장한 부트 롬과 비행소프트웨어 이미지를 저장한 듀얼 NVMEM 형태로 개발되고 있다. 부트 롬에 내재된 부트 로더는 프로세서 초기화 이후 GPIO의 입력에 따라 비행소프트웨어 모드 혹은 모니터 모드로 천이하게 된다. 비행소프트웨어 모드에서는 듀얼 NVMEM중 선택된 NVMEM에 대한 CRC를 체크하여 정상적일 경우 NVMEM에 저장되어 있는 탑재소프트웨어를 코드가 수행 될 RAM으로 적재 한 후 VxWorks RTO5를 구동하여 테스크를 생성하여 탑재소프트를 수행하게 된다. 모니터 모드에서는 지상에서 NVMEM reprogramming을 가장 메인으로 수행하며 기본적인 보드 레벨 테스트를 수행할 수 있다. 본 논문에서는 차세대 저궤도 위성의 부트 롬 소프트웨어 설계 및 시뮬레이터 기반의 검증 방법에 대하여 기술한다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.264-269
• /
• 2000

As a part of the ongoing effort towards commercial application of high-temperature fuel cell power generation systems, we have recently built a pilot-scale molten carbonate fuel cell power plant and tested it. The stack test system is composed of diverse peripheral units such as reformer, pre-heater, water purifier, electrical loader, gas supplier, and recycling systems. The stack itself was made of 40cells of $6000cm^2$ area each. The stack showed an output higher than 25kW power and a reliable performance at atmospheric operation. A pressurized performance was also tested, and it turned out the cell performance increased though a few cells have shown a symptom of gas crossover. The pressurized operation characteristics could be analyzed with numerical computation results of a stack model.

• 한국대기환경학회지
• /
• 제19권6호
• /
• pp.805-810
• /
• 2003

The annual air pollution emissions from construction and agricultural equipments were estimated from 1987 through 2000. The annual numbers and operation hours of 5 major construction equipments (Excavator, Bulldozer, Loader, Fork lift, Crane) and 3 major agricultural equipments (Power Tiller, Agricultural Tractor, Combine) were investigated for emission estimation. And monthly variation factors of operation hours of construction equipment were investigated too. The NO$_{x}$ emission from construction equipment have been gradually increased since 1987 to 1997, but sharply decreased as -45％ in 1998 due to economic crisis in Korea. The NO$_{x}$ emission was estimated as 64,300 ton/year from construction equipment, and as 23,300 ton/year from agricultural equipment in 2000.000.

• 한국환경과학회지
• /
• 제26권9호
• /
• pp.1013-1021
• /
• 2017

Exposure to Diesel Particulate Matter (DPM) potentially causes adverse health effects (e.g. respiratory symptoms, lung cancer). Due to a lack of data on Elemental Carbon (EC) exposure levels in underground copper ore mining (unlike other underground mining industries such as non-metallic and coal mining), this case study aims to provide individual miners' EC exposure levels, and information on their work practices including use of personal protective equipment. EC measurement was carried out during different work activities (i.e. drilling, driving a loader, plant fitting, plant operation, driving a Specialized Mining Vehicle (SMV)) as per NIOSH Method 5040. The copper miners were working 10 h/day and 5 days/week. This study found that the most significant exposures to EC were reported from driving a loader (range $0.02-0.42mg/m^3$). Even though there were control systems (i.e. water tanks and DPM filters) on the diesel vehicles, around 49.5% of the results were over the adjusted recommendable exposure limit ($0.078mg/m^3$). This was probably due to: (1) driver's frequently getting in and out of the diesel vehicles and opening the windows of the diesel vehicles, and (2) inappropriate maintenance of the diesel vehicles and the DPM control systems. The use of the P2 type respirator provided was less than 19.2%. However, there was no significant difference between the day shift results and the night shift results. In order to prevent or minimize exposure to EC in the copper ore mine, it is recommended that the miners are educated in the need to wear the appropriate respirator provided during their work shifts, and to maintain the diesel engine and emission control systems on a regular basis. Consideration should be given to a specific examination of the diesel vehicles' air-conditioning filters and the air ventilation system to control excessive airborne contaminants in the underground copper mine.