• 한국산학기술학회논문지
• /
• 제19권4호
• /
• pp.85-92
• /
• 2018

수요관리를 통해 전기요금을 절감할 수 있다. 부하의 수요 관리 방법 중 하나로 ESS를 설치해 수요가 높은 시간대의 부하를 수요가 낮은 시간대로 옮기는 peak shifting을 사용함으로써 최대 부하를 낮추고 전력량 요금을 절감할 수 있다. 전기요금은 계약 용량 당 기본요금과 전력량 요금으로 이루어져있다. 전력량 요금을 최소화하기 위한 최적화 수행시 목적함수는 선형식으로 표현할 수 있으며, 기본 요금 최소화를 위한 목적함수는 이차식으로 표현할 수 있다. 선형식으로 표현된 목적함수에서는 ESS PCS(Power Conversion System)의 충, 방전 효율이 다른 경우를 다룰 수 없기 때문에 본 논문에서 충, 방전 효율이 다른 경우의 영향을 반영하고 혼합정수계획법(MILP, Mixed Integer Linear Programming)을 이용할 수 있는 정식을 제시하였다. 혼합정수계획법을 사용한 정식에서는 사전에 정해진 최대 부하 절감율에 대해 전기요금 최소화를 수행하게 되지만 최대 부하 절감과 전기요금 절감을 동시에 고려하기 위해서는 이차 계획법을 사용하는 것이 유용하다. 본 논문에서는 각 최적화 방법에 대한 장, 단점을 도시철도 변전소에 대한 시뮬레이션 결과를 정량적으로 비교분석하여 ESS 설비계획수립에 적합한 최적화 방법을 선택할 수 있는 근거를 제시하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2004년도 추계학술대회 논문집
• /
• pp.1282-1285
• /
• 2004

The high voltage driving system with multi-phase shifter including piezoelectric actuators comprised a driving power unit for outputting the driving power by converting input alternate current into direct current, a frequency shifting unit for supplying the direct current power and shifting or generating a frequency, a high-voltage amplification unit for amplifying the input signal outputted from the driving power unit and the frequency shifting unit into a high-voltage signal, and a phase shifting unit for shifting the phase difference of the amplified signal applied to the high-voltage amplification unit and driving plural piezoelectric actuators sequentially. The results that the operating voltage was stable, the voltage loss ratio was low and the response velocity was fast could be obtained. An experiment on performance of the high voltage driving system with multi-phase shifter designed and manufactured as above described was conducted by using a piezoelectric pump having 3 sheets of round unimorph piezoelectric actuators laminated respectively in a rectangular case. It sucks any fluid by causing the first piezoelectric actuator to shift from the inlet porter side, the phase delay of 60$^{\circ}$ causes the second piezoelectric actuator to begin to shift, and the phase delay of 120$^{\circ}$ causes the third piezoelectric actuator to begin to shift. As a result of measuring each change in the outlet flow rate of the piezoelectric pump, it was shown that the frequency-flow rate characteristic, the voltage-flow characteristic, and the load pressure-flow rate characteristic were improved.

• 전기학회논문지
• /
• 제59권12호
• /
• pp.2165-2172
• /
• 2010

This paper presents the operation algorithm of microgrid on the Real Time Pricing(RTP) for building the smart grid. RTP is higher power price variability than flat rate and time of use. However it has an effect on peak clipping and peak load shifting due to the increased price on peak time power demand. When the RTP are applied to the microgrid system, the proposed algorithm is able to be effective and economic operation. The implemented system is operated for the economic operation in microgrid connected with the power system. On the other hand, when the microgrid is operated on isolation mode, it focus on the improvement of stability and the power supply reliability of the sensitive loads. The test system are implemented and calculated on various operation modes based on non-dispachable generator output and RTP data for validating the proposed operation algorithm. The calculated results are compared to the implemented results using real-time simulator. It can be confirmed that the proposed operation system are identical results to the calculated one. When the proposed operation algorithm is applied to the system, it can be show the effectiveness of the peak clipping and peak load shifting and the improvement of economic feasibility.

• 한국생산제조학회지
• /
• 제8권6호
• /
• pp.78-83
• /
• 1999

This study discusses a non-contact optical technique, electronic speckle pattern interformetry(ESPI), that is well suited for in-plane and out-of-plane deformation measurement. However, the existing ESPI methods that are based on dual-exposure, real-time and time-average method have difficulties for accurate measurement of structure, due to irregular intensity and shake of phase. Therefore, phase shifting method has been proposed in order to solve this problem. About the method, the path of reference light in interferometry is shifted and added to least square fitting method to make the improvement in distinction and precision. This proposed method is applied to measure in -plane displacement that is compared with the previous method. Also, Used as specimen AS4/PE따 [30/=30/90]s was analyzed by ESPI based on real-time to determine the characteristics of vibration under no-load and tension. These results are quantitatively compared with those of FEM analysis inmode shapes.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.601-606
• /
• 1993

The natural frequency measurement of passenger car tire under the load and rotation are studied. In order to obtain theoretical natural frequency and mode shape, the plane vibration of a tire is modeled to that of circular beam. By using the Tickling method based on Hamilton's principle, theoretical results are determined by considering tension force due to tire inflation pressure, rotational velocity and tangential, radial stiffness. Modal parameters varying the inflation pressure, load, rotational velocity are determined experimentally by using frequency response function method. The results show that experimental conditions are parameter for shifting of natural frequency.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2000년도 가을 학술발표논문집 Vol.27 No.2 (1)
• /
• pp.92-94
• /
• 2000

비디오 저장 서버를 설계하는데 가장 주안을 두어야 할 점은 서버의 이용률을 증가시키고 그에 따른 비용을 최소화 해야 한다는 점이다. 이를 위한 서버로 분산 비디오 저장 서버가 주로 이용되고 있고, 그 목적으로는 균등한 비디오 할당과 부하조정(load balancing)이 제안되어 왔다. 이에 대한 방안의 하나로 디스크 기반의 비디오 저장 서버 클러스터에서 부하 시프팅(load shifting)이 그 목적을 이루기 위한 한가지 방법으로 연구되었다. 이것은 동일한 용량의 서버로 구성된 비디오 서버 클러스터에서 비디오를 다른 서버에 복사해 놓고 사용되고 있는 비디오 요구시 그 비디오에 대한 요구를 다른 서버의 복사본으로 이동시킴으로써 서버들에 대해 균등한 비디오 할당을 하고 서버나 비디오의 추가와 같은 동적인 변화에 대해 데이터 활당 및 부하 조정을 감안하여 제안된 것이다. 이 논문에서는 기존의 동일한 서버만을 사용한 것과는 달리 용량이 서로 다른 서버나 비디오를 추가할 경우에 요구되는 최적의 비디오 데이터 할당과 부하 조정에 관한 전략에 관하여 설명한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1993년도 하계학술대회 논문집 B
• /
• pp.905-907
• /
• 1993

Demand for electricity is increasing annually. Especially, the daytime demand grawth shows higher than any other time period. So the big difference between maximum and minimum electrical demand becomes another important problem to be solved. The Battery Energy Storage System is chosen as one of the solutions among the sevral methods. The purpose of utilization of Battery Energy Storage System is to improve the daily load factor. Also, Battery Energy Storage System may be used for the load levelling or the load shifting as well as the spinning reserve. Up to now, only the pumped hydro power plant system has been operated on the commercial basis, but this system has so many constraints such as site, environmental effects, construction period, ect. Being considered current electrical power situation the development of electric storage system is in need latly. Among the various electric storage systems, Battery Energy System is chosen with the top priority because it has sevral merits to cover such as the short construction period, the demand site installation, and the food environmental characteristics.

• 한국지능시스템학회논문지
• /
• 제26권5호
• /
• pp.351-360
• /
• 2016

Rapid population growth with high living standards and high electronics use for personal comfort has raised the electricity demand exponentially. To fulfill this elevated demand, conventional energy sources are shifting towards low production cost and long term usable alternative energy sources. Hybrid renewable energy systems (HRES) are becoming popular as stand-alone power systems for providing electricity in remote areas due to advancement in renewable energy technologies and subsequent rise in prices of petroleum products. Wind and solar power are considered feasible replacement to fossil fuels as the prediction of the fuel shortage in the near future, forced all operators involved in energy production to explore this new and clean source of power. Presented paper proposes fuzzy logic based Energy Management System (EMS) for Wind Turbine (WT), Photo Voltaic (PV) and Diesel Generator (DG) hybrid micro-grid configuration. Battery backup system is introduced for worst environmental conditions or high load demands. Dump load along with dump load controller is implemented for over voltage and over speed protection. Fuzzy logic based supervisory control system performs the power flow control between different scenarios such as battery charging, battery backup, dump load activation and DG backup in most intellectual way.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.277-283
• /
• 1989

For the battery energy storage system (BESS), battery is one of most important parts. Various new type batteries for load shifting are under developing. The lead acid battery technology status such as structure, charge and discharge characteristics, life cycle etc. is reviewed and research trend is also introduced.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.211-216
• /
• 2014

Construction of power plants and T&D facilities is so difficult because of the civil complaints and the additional cost according to the concerning field conditions. Therefore, various researches and methods have been considered to get solutions in the demand side and energy storage systems have been in the spotlight because of the various functions such as peak shaving, load shifting, and power system stabilizing, and so on. Residential small size batteries are considered in this paper and the economic analysis is carried out to evaluate the reasonable subsidy levels for the deployment of energy storage systems. Various economic parties are considered to find reasonable subsidy level comparing each other, which parties consist of utilities, participants and non-participants in general. The evaluation is based on California Standard Practice Test and the results are able to be used as subsidy guidelines.