• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.495-502
• /
• 1998

A mathematical model of viscoelasticity on the material property of human pharyngeal tissue utilizing Y.C. Fung's Quasi-linear viscoelastic theory is proposed based on cyclic load, stress relaxation, incremental load, and uniaxial tensile load tests. The material properties are characterized and compared with other biological materials' results. The mathematical model is proposed by combining two characteristic functions determined from the stress relaxation and uniaxial tensile load tests. The reduced stress relaxation function G(t) and elastic response function S(t) are obtained from stress relaxation test and uniaxial tensile load test results respectively. Then the model describing stress-time history of the tissue is implemented utilizing two functions. The proposed model is evaluated and validated by comparing the model's cyclic behaviour with experimental results. The model data could be utilized as an important information for constructing 3-dimensional biomechanical model of human pharynx using FEM(Finite Element Method).

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2005.05a
• /
• pp.176-179
• /
• 2005

Spray casting of hypereutectic Al-Si based alloy has been reported to provide distinct advantages over ingot metallurgy (IM) or rapid solidification/powder metallurgy (RS/PM) process in terms of microstructure refinement. Hypereutectic Al-Si based alloys have been regarded attractive for automotive and aerospace application, due to high specific strength, good wear resistance, low coefficient of thermal expansion, high thermal stability, and good creep resistance. In this study, hypereutectic Al-25Si-2.0Cu-1.0Mg alloy was prepared by OSPREY spray casting process. High temperature deformation behavior of the hypereutectic Al-Si based alloy has been investigated by applying the internal variable theory proposed by Chang et al. The change of strain rate sensitivity and Creep transition were analyzed by using the load relaxation test and constant creep test.

• Transactions of Materials Processing
• /
• v.14 no.6 s.78
• /
• pp.502-508
• /
• 2005

Hypereutectic Al-Si alloys have been regarded attractive for automotive and aerospace application, due to high specific strength, good wear resistance, high thermal stability, low thermal expansion coefficient and good creep resistance. Spray casting of hypereutectic Al-Si alloy has been reported to provide distinct advantages over ingot metallurgy (IM) or rapid solidification/powder metallurgy (RS/PM) process in terms of microstructure refinement. In this study, hypereutectic Al-25Si-2.0Cu-1.0Mg alloy was prepared by OSPREY spray casting process. The change of strain rate sensitivity and Creep transition were analyzed by using the load relaxation test and constant creep test. High temperature deformation behavior of the hypereutectic Al-Si alloy has been investigated by applying the internal variable theory proposed by Chang et al. Especially, the creep resistance of spray casted hypereutectic Al-Si alloy can be enhanced considerably by the accumulation of prestrain.

• Journal of Korean Academy of Fundamentals of Nursing
• /
• v.6 no.2
• /
• pp.240-254
• /
• 1999

The purpose of this study was to investigate the effect of exercise therapy and relaxation therapy on catecholamine and heart rate in people in white color jobs and to determine this information the effectiveness of applied exercise therapy and relaxation therapy as a nursing intervention method for stress patients. The subjects were divided into an exercise therapy group, a relaxation therapy group, and control group and the research design was a nonequivalent control group pretest-post test design(exercise therapy : n= 12, relaxation therapy : n=12, control group, the group without any treatment in exercise on relaxation therapy : n=12), The subjects in the exercise therapy group were given a particular intensity for each kp during 30min, bicycle ergometer which is using an LX PE training system before & after 4weeks of training. The exercise therapy that was used was Astrard load method which tested absolute exercise load of heart rate before & after four weeks, and resting heart rate was tested for exercise and relaxation therapy before, after four weeks, and at eight weeks. The results of each kp & absolute exercise load were calculated with the target rate formula(maximal heart rate-rest heart rate) x exercise intensity(%) + rest heart rate so the subjects could continue 60-70% exercise intensity for exercise therapy over eight weeks. The relaxation therapy subjects were trained using a modified Jacobson's relaxation technique for eight weeks. The exercise and relaxation therapy were trained at the following intensity for eight weeks(3times/week, 30min/day) to see changes in catecholamine & heart rates. After eight weeks, statistical analysis of exercise & relaxation therapy were carried out Two-way ANOVA and multiple range test(SNK : Student Newman Keul) were used. The results are as follows : 1. The change of epinephrine & norepinephrine in the exercise therapy, relaxation therapy, and control group was statistically significant at the .05 level after four weeks & eight weeks. Also, exercise therapy was statistically significant at .05 level over that of the control group after 4weeks. 2. The change of heart rate in relaxation therapy was statistically significant at the .05 level, and was statistically significant at the .05 level over that of the exercise therapy and control group. In conclusion, it is obvious that exercise therapy and relaxation therapy should be one of the most effective stress treatment and desirable nursing interventions methods for job stress in people in white color jobs.

• The Journal of Engineering Geology
• /
• v.10 no.3
• /
• pp.217-223
• /
• 2000

Microcracks that consist of quarry planes of granite are an essential factor affecting the long-term behavior of granite. In this paper, fine-grained granite distributed in the Tsukuba area of Japan was selected and microcracks were measured by using scanline method. In addition, a new relaxation testing equipment was developed to carry out stress relaxation test under water-saturated triaxial condition. Based on the relaxation test results with the initial stress level of 75%, the axial stress is decreased by 39%-49% just after the start of the tests, and the totally relaxed stress is 10∼24 MPa in 190 ERT (Elapsed relaxation time, hour). In addition, the relaxed stress is increased with the density of cracks which are parallel to axial load direction.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.195-198
• /
• 2003

High temperature deformation and softening behavior of SAF 2507 super duplex stainless steel (SDSS) has been investigated in connection with an FEM analysis of hot forging process. Flow curves at various strain rates and temperatures were determined first from compression tests, and the kinetics of dynamic recrystallization were also formulated through the analysis of load relaxation test results. Applying the dynamic materials and proposed by Prasad et al., it was possible to determine the characteristics of deformation behavior effectively at a given condition of deformation. Constitutive relations and recrystallization kinetics formulated from the test results were then implemented in a commercial FEM code. Flow stress compensation formulated upon the volume fraction of recrystallization and adiabatic heating was found to improve significantly the FEA solutions in predicting the forming load and the distribution of recrystallized volume fraction after forging.

• Transactions of Materials Processing
• /
• v.12 no.4
• /
• pp.308-313
• /
• 2003

High temperature deformation and softening behavior of SAF 2507 super duplex stainless steel (SDSS) has been investigated in connection with an FEM analysis of hot forging process. Flow curves at various strain rates and temperatures were determined first from compression tests, and the kinetics of dynamic recrystallization were also formulated through the analysis of load relaxation test results. Using the dynamic materials theory proposed by Prasad, the deformation behavior was effectively determined for various conditions. Constitutive relations and recrystallization kinetics formulated from the test results were then implemented in a commercial FEM code. The forming load as well as the distribution of recrystallized volume fraction after forging was successfully predicted by means of the flow stress compensation formulated upon the volume fraction of recrystallization and adiabatic heating.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.89-92
• /
• 1992

This paper presents an approach for thermal Unit Commitment by Lagrangian Relaxation with fuzzy technique. A proposed algorithm makes it possible to execute optimal decision making between Generation Cost and Load Demand with membership function. In order to test the validity of the proposed method, we applied to Mid-westerm utility system which has 20 thermal units. So, the usefulness of this method is verified.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.17-28
• /
• 1999

In order to analyze effects of strain rate on consolidation of natural clay, this paper presents a nonlinear elasto viscoplastic model in which viscoplastic behavior is modeled by a unique effective stress-strain-strain rate relationship (equation omitted). The predicted values using numerical analysis are compared with measured ones in several laboratory tests such as creep test, multistage load test, and relaxation test for Berthierville clay. It is possible to estimate consolidation behavior of natural clay with reasonable accuracy using the proposed nonlinear viscoplastic model.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2003.05a
• /
• pp.295-298
• /
• 2003

High temperature deformation behavior of a Ti-Al intermetallic compound has been investigated. Specimens with a near gamma and a lamella structures were obtained by performing heat treatment at 1200 and 1330$^{\circ}C$, respectively, for 24 hr and stabilized at 900$^{\circ}C$ for 4 hr followed by air cooling. A series of load relaxation tests has been conducted on these samples at temperatures ranging from 850 to 950$^{\circ}C$ to construct flow curves in the strain rate range from 10$\^$-6//s to 10$\^$-3//s. Strain hardening was observed even at the temperature of 950$^{\circ}C$ in both the near gamma and the lamella structures. Further aging treatment for 12 hr at test temperatures has found to cause no softening in both microstructures.