• 한국전자통신학회논문지
• /
• 제10권1호
• /
• pp.13-20
• /
• 2015

종래의 LDMOS를 사용한 전력증폭기는 AB-급 및 도허티 방식으로 60MHz 대역폭의 협대역에서 55%의 효율을 보여주고 있으나, 기지국의 전력증폭 모듈의 RRH의 적용에 따라 100MHz이상의 대역확장과 60%이상의 고효율 전력증폭기를 요구하고 있으므로, 본 연구에서는 LDMOS FET를 이용한 J-급 전력증폭기를 설계하여 200MHz대역에서 60%이상의 고효율 특성을 나타내었다. 설계한 J-급 전력증폭기는 2차 고조파 부하가 순수한 리액턴스 성분만을 포함하고 작은 양호도 Q 값을 갖도록 출력단 정합회로를 최적화 시켰다. 측정결과 WCDMA 주파수 대역을 포함한 2.06~2.2GHz에서 연속파 신호를 입력하였을 때 62~70%의 전력 부가효율(PAE)의 특성을 갖는 10W급 J-급 전력증폭기를 구현하였다.

• Journal of Power Electronics
• /
• 제6권1호
• /
• pp.52-66
• /
• 2006

This paper proposes a wind energy conversion system connected to a grid using a self-excited induction generator (SEIG) based on the maximum power point tracking (MPPT) control scheme. The induction generator (IG) is controlled by the MPPT below the base speed and the maximum energy can be captured from the wind turbine. Therefore, the stator currents of the IG are optimally controlled using the indirect field orientation control (IFOC) according to the generator speed in order to maximize the generated power from the wind turbine. The SEIG feeds a (CRPWM) converter which regulates the DC-link voltage at a constant value where the speed of the IG is varied. Based on the IG d-q axes dynamic model in the synchronous reference frame at field orientation, high-performance synchronous current controllers with satisfactory performance are designed and analyzed. Utilizing these current controllers and IFOC, a fast dynamic response and low current harmonic distortion are attained. The regulated DC-link voltage feeds a grid connected CRPWM inverter. By using the virtual flux orientation control and the synchronous frame current regulators for the grid connected CRPWM inverter, a fast current response, low harmonic distortion and unity power factor are achieved. The complete system has been simulated with different wind velocities. The simulation results are presented to illustrate the effectiveness of the proposed MPPT control scheme for a wind energy system. In the simulation results, the d-q axes current controllers and DC-link voltage controller give prominent dynamic response in command tracking and load regulation characteristics.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.784-793
• /
• 2019

Two objectives can be pursued simultaneously with the ${\delta}$ control of a single-phase electric spring (ES). These objectives are the stabilization of the voltage across the critical load (CL) of a power system, and the achievement of a specific functionality similar to the pure compensation of reactive power or the correction of the power factor. However, existing control systems implementing the ${\delta}$ control do not cope with non-ideal operating conditions, such as line voltage distortions, and exhibit a somewhat sluggish regulation of the CL voltage. In an effort to improve both the steady-state and transient performances of an ES power system, this paper proposes implementing the ${\delta}$ control by means of a control system built up on the repetitive control and assisted by state feedback with pole assignment. This paper starts by analyzing the dynamics of an ES power system in terms of its poles and zeros. After that, a reduced second-order model of the dynamics is formulated to avoid a notch filter in the pole assignment. A repetitive control for an ES power system is then designed to meet the two above mentioned objectives. Experimental tests carried out on a laboratory setup demonstrate the effectiveness of the proposed control system in significantly improving the ES power system performance, while reaching the two objectives. In particular, the tests outline the large mitigation of harmonics in the CL voltage under line voltage distortions and its fast stabilization action.

• Journal of Electrical Engineering and Technology
• /
• 제10권1호
• /
• pp.195-204
• /
• 2015

In this paper, the development of a cost-effective active power filter/uninterruptible power supply (APF/UPS) system with seamless mode transfer is described. The proposed scheme employs a pulse-width-modulation (PWM) voltage-source inverter and has two operational modes. First, when the source voltage is normal, the system operates as an APF, which compensates for the harmonics and power factor while boosting the DC-link voltage to be ready for the disturbance, without an additional DC charging circuit. A simple algorithm to detect the load current harmonics is also proposed. Second, when the source voltage is out of the normal range (owing to sag, swell, or outage), it operates a UPS, which controls the output voltage constantly by discharging the DC-link capacitor. Furthermore, a seamless transfer method for the single-phase inverter between the APF mode and the UPS mode is also proposed, in which an IGBT switch with diodes is used as a static bypass switch. Dissimilar to a conventional SCR switch, the IGBT switch can implement a seamless mode transfer. During the UPS operation, when the source voltage returns to the normal range, the system operates as an APF. The proposed system has good transient and steady-state response characteristics. The APF, charging circuit, and UPS systems are implemented in one inverter system. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype APF/UPS system rated at 3 kVA.

• 전기학회논문지P
• /
• 제55권1호
• /
• pp.13-20
• /
• 2006

In this paper, a control method of ozone generator for a tiny deodorizer is proposed, and also a cooling technique is described which is cooling down the flowing air gap into a silent discharger to $2[^{\circ}C]$ to generate ozone of high density and diffusing power. As the digital control system for this method, a double feedback loop is designed which detects the voltage and current of equivalent capacitor of the discharger and compensates for the poor power waveform caused by the noise at high discharging frequency. During the plant modeling of this system, computing time factor is considered as a unique parameter of the power system to improve the respond characteristics with regard to fluctuating load and to replenish the computing time delay of the controller. Through the experiment, sinusoidal input current for discharger can be acquired and all the effectiveness of this accurate control system over unstable ozone discharger are proved.

• 전기학회논문지
• /
• 제67권5호
• /
• pp.601-610
• /
• 2018

The purpose of this paper is to establish a new optimum Generator Maintenance Scheduling(GMS) considering renewable energy generator. In this paper, the total renewable energy generation is estimated using hourly capacity factor of renewable energy generator. The GMS was optimized with the objective function of maximizing the minimum reserve rate, minimizing the probabilistic production cost, minimizing the loss of load expectation, and minimizing $CO_2$ emissions. In the case study of this paper, GMS considering renewable energy and GMS not considering renewable energy are shown by each objective function. And it shows scenarios of the reliability, the environmental and economical factors when two nuclear power plants inputted and ten coal thermal power plants shut downed respectively.

• 전력전자학회논문지
• /
• 제2권2호
• /
• pp.29-34
• /
• 1997

본 논문에서는 단상 PWM 컨버터의 입력전류 제어계와 출력전압 제어계의 안정한 PI 이득을 설계하고 DSP를 이용하여 순시 제어기를 구현한다. DC link 전압 제어기는 연속영역에서 설계하여도 무방하나 입력전류 제어계는 이산화 영향을 무시할 수 없으므로 입력전류 제어계를 연산 시간을 고려하여 이산 영역에서 전달 함수를 구하여 설계한다. 또한 리플전압 추정 루틴을 통하여 실제 커패시터의 정전용량을 알아내는 알고리듬을 제시하고 이 알고리듬에 의하여 DC link 정전 용량을 과도상태에서도 추정해 낼수 있음을 보인다. 실험에 의하여 입력역률 99%와 부하급변시 전압 변동률 $\pm$5% 이하의 결과를 얻었다.

• Advances in aircraft and spacecraft science
• /
• 제7권1호
• /
• pp.53-78
• /
• 2020

Automatic trajectory planning is an important task that will have to be performed by truly autonomous vehicles. The main method proposed, for unmanned airplanes to do this, consists in concatenating elementary segments of trajectories such as rectilinear, circular and helical segments. It is argued here that because these cannot be expected to all be flyable at a same constant speed, it is necessary to consider segments on which the airplane accelerates or decelerates. In order to preserve the planning advantages that result from having the speed constant, it is proposed to do all speed changes at maximum deceleration or acceleration, so that they are as brief as possible. The constraints on the load factor, the lift and the power required for the motion are derived. The equation of motion for such accelerated motions is solved numerically. New results are obtained concerning the value of the angle and the speed for which the longest distance and the longest duration glides happen, and then for which the steepest, the fastest and the most fuel economical climbs happen. The values obtained differ from those found in most airplane dynamics textbooks. Example of tables are produced that show how general speed changes can be effected efficiently; showing the time required for the changes, the horizontal distance traveled and the amount of fuel required. The results obtained apply to all internal combustion engine-propeller driven airplanes.

• 전력전자학회논문지
• /
• 제5권2호
• /
• pp.176-183
• /
• 2000

본 논문에서는 단일 스위치 3상 승압형 컨버터 입력전류의 왜형을 개선하기 위한 6고조파 주입 PWM 방식이 제안디었다. 주기적인 6고조파 전압이 한 스위칭 사이클 내에 컨버터 스위치의 듀비티를 가변하도록 제어회로에 주입되었다. 그 결과 입력 상전류는 입력전압을 따라가고 거의 1에 가까운 역률을 얻었다. 실험결과는 3상 입력 AC 140∼220V, 400V∼6kW 저항부하와 3상 AC 220V, 비선형 부하인 CO2 아크 용접기에 의하여 입증하였다.

• 조명전기설비학회논문지
• /
• 제23권2호
• /
• pp.82-88
• /
• 2009

전력용 커패시터는 유도성 부하의 낮은 역률을 보상하기 위해 설치하는 경우가 많지만, 전력변환장치에서 발생하는 고조파를 줄이기 위해 수동형 필터로서 리액터와 함께 사용되는 경우도 있다. 수동형 필터는 커패시터와 리액터를 직렬로 연결하여 사용한다. 필터는 비선형 부하에서 발생하는 고조파를 흡수하는 역할을 하기 때문에 전압 및 전류 스트레스를 받아 소손 또는 열화되어 정상적인 수명을 보장받지 못하는 경우가 많다. 본 논문에서는 PWM 인버터의 전원측에 설치된 수동형 필터가 고조파를 저감할 때 받는 영향을 해석하였다.