• 한국지반환경공학회 논문집
• /
• 제14권10호
• /
• pp.11-16
• /
• 2013

양방향재하시험의 성공여부는 상향력과 하향력의 균형을 이룰 수 있는 재하장치 위치 선정에 달려있다. 상향력과 하향력의 균형을 이루기 위해서는 발휘되는 단위주면마찰력과 단위선단지지력의 산정이 중요한데, 국내에서 시행되는 양방향재하시험은 주로 사용말뚝에 적용되어 극한지지력까지 재하되지 않고 설계지지력을 확인하는 것이 일반적이다. 하지만 국내 외 제안된 암반층의 극한단위주면마찰력 및 허용단위주면마찰력 산정식은 암반의 일축압축강도를 기반으로 되어있고, 또한 국내 풍화암층과 RQD가 극히 낮은 연암층은 일축압축강도시험을 할 수 있는 코아를 얻기가 어려워 적용이 어려운 실정이다. 따라서 이 연구에서는 국내에서 시행되었던 양방향재하시험에서 얻은 각 지층별 발휘된 단위주면마찰력과 환산된 SPT N/cm과 관계도표를 제안하고 이 관계도표를 이용하여 실제 국내 현장의 양방향재하시험을 위한 상향력과 하향력의 균형위치를 선정하였다. 또한 선정된 균형위치에 양방향재하장치를 설치한 후 재하시험을 실시하여 측정된 각 지층의 발휘된 단위주면마찰력 값들과 균형위치 선정 시 적용한 관계도표의 값들을 비교하여 관계도표의 적정성을 분석하였다. 분석결과 풍화토층과 풍화암층에서는 거의 유사한 결과를 보였고, 연암층에서는 재하장치 상부연암층과 하부연암층에서 발휘된 측정값(상부 $1,151kN/m^2$, 하부 $1,500kN/m^2$)의 평균값($1,325kN/m^2$)도 산정값($1,250kN/m^2$)과 큰 차이를 보이지 않아 관계도표는 적정한 것으로 판단되었다.

• 한국식품과학회지
• /
• 제21권1호
• /
• pp.109-119
• /
• 1989

김장김치 제조방법에 따라 김치를 담금 후 $10^{\circ}C$에서 저장하였다. 김치의 방사선 살균을 위한 최적 숙성기는 적정 산도가 0.3% 내외 일 때 였고, 포장은 PE/Nylon 접합봉지 사용구 보다 PVC원통형 용기에 상부를 유리판으로 눌러놓은 상태의 것이 품질 면에서 우수하였다. 미생물 생육시험에서 전 젖산균은 방사선조사 직후 비조사구는 $10^8\;cells/ml$이었으나 1-3 kGy조사로서 2-4 log cycles감소되었고 전 저장기간을 통해 생육이 억제되었다. 효모 및 곰팡이도 2-3 kGy 조사구는 저장 30일 후에도 저장 초보다 낮았다. 이화학적 특성 시험에서 특히 산도는 비조사구가 저장 15일 에 0.7-0.8% 정도였으나, 2-3kGy 조사구는 저장 30일에도 0.5-0.6%로 낮았다. 김치조직 변화도 저장기간의 경과와 함께 2kGy 조사구가 가장 우수하였다. 관능검사에 의한 종합적 품질평가에서는 비조사구는 저장 15일 이후부터 식용 부적합 하였으나, 2-3 kGy 조사구는 저장 30일 이후에도 양호한 품질을 보여 비조사구에 비해 2배 이상의 저장성을 연장할 수 있었다.

• 한국항해항만학회지
• /
• 제36권10호
• /
• pp.839-844
• /
• 2012

풍향풍속계는 실시간으로 풍향과 풍속을 측정하는 기상관측기구로서 바람의 영향을 많이 받는 항만, 조선소, 해상구조물, 또는 건설현장에서 사용되는 크레인에 장착되어 작업가능 여부를 알리거나 전도 사고를 예방하기 위한 안전시스템과 연동되어 사용된다. 로드 셀형 풍향풍속계는 4개의 수풍부에 연결된 로드 셀의 하중 합을 이용하여 풍속을, 하중 비를 이용하여 풍향을 측정한다. 선행연구에 따르면, 풍향에 따른 인접한 두 수풍부의 하중 비는 날개 주위에 와류로 인해 불규칙한 값을 보이게 되며, 이는 풍향 오차를 증가시키는 원인이 된다. 본 연구에서는 이러한 오차를 줄이기 위하여 세 가지 수풍부 형상에 따른 하중 비를 분석하고, 오차를 줄일 수 있는 수풍부 형상을 제시하고자 한다. 수풍부 형상에 따른 하중 비를 비교하기 위해 ANSYS CFX를 사용하여 유동해석을 수행하였으며, 설계변수로 0도에서 90도까지 11.25도 간격으로 9가지 풍향조건을 설정하였다.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.82-87
• /
• 2010

A measurement system of contact force between overhead contact line and pantograph of train is developed which measures the contact force by using four sets of full-bridge strain gauges instead of load cells and accelerometers. The sensors are installed on the pan head of pantograph and the measured data from the sensors are transmitted to a server system in the train by way of wireless Lan. This configuration of the measuring system makes it easy to install on the trains without any alteration of train system. The measurement system is applied to KTX on the Kyungbu high speed line, and the measured contact force data shows good agreement with those measured by load cell and accelerometers. The waveform of the contact force between overhead contact line and pantograph contains essential information about their conditions. The proposed measurement system can probe any defects on overhead contact lines with train running at high speed, which will be a powerful solution for the maintenance of long-distance overhead contact lines.

• Journal of Biosystems Engineering
• /
• 제5권2호
• /
• pp.40-57
• /
• 1980

The aim of this study was to promote extensive use of strain gage for accurate measurement in the area of farm machinery research. The results are summarized as follows. 1. Although many strain gate transducers commercially available such as load-cells , accelerometers and pressure transducers have been used in the area of farm machinery research, many types of transducers had to be developed due to the inadaptability or high cost commercial transducers, in many instances. 2. A strain -gaged cantilever beam could be used as a good educational material to demonstrate the methods of Wheatstone bridge arrangement, calibration and theoreticval computation. A ring type load-cell and shaft torque transducer also could be used for the same purpose. 3. The torque and angular speed transducers for an auto-feed thresher and the displacement and pressure transducers for a rice whitener were made and gave satisfactory results. 4. Based on the above results, it is possible to develop simple and low-cost transducers to measure displacement, angular speed , torque and pressure of farm machine elements.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.1468-1475
• /
• 2005

In this study, the effects of temperature on loading of long-span strut were studied by using field monitoring and numerical analysis. For the field monitoring, several sensors, such as stain gages, temperature gages and load cells, were installed on the struts. From the monitoring results, the relation between temperature and axial force of the struts was analysed. By numerical analysis, the changes of axial force of strut and lateral displacement of wall due to temperature change were described with the strut length and ground conditions.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2010년도 춘계학술대회 논문집
• /
• pp.671-679
• /
• 2010

The construction of concrete track for the first time in Korea gives lots of meanings to civil engineering in various aspects. Settlement level needs to be kept minimal for the safety of the track. Concrete track has different structural characteristics comparing to conventional ballast track, so load distribution in concrete track is also different. Since it is the first time to build concrete track, there are very few experience and data available on the subject. Therefore it is important to evaluate how much load is transferred to the ground due to the running vehicle in concrete track and to determine the optimal thickness of layers. In this research, 9 individual earth pressure cells were installed at OOOk930 site in 2nd stage of Kyungbu high speed railway during under construction. The in-situ pressure data were measured at each layers during pump-car and locomotive were moving on the high speed railway surface.

• 한국산업융합학회 논문집
• /
• 제4권4호
• /
• pp.379-386
• /
• 2001

The lower toughness or brittle materials for mechanical test lead to the additional requirement that applied displacements be controlled with high resolution. Biaxial tension and shear tester using stepper motor with harmonic driver is shown. The device had to be high resolution so that the crack initiation process of slow extension and steady growth could be examined, Grip plates were connected to a linear bearing and actuator. The actuators consisted of stepper motors with harmonic driver connected to pre-loaded ball screw and nut assemblies. The encoders and motor controllers were connected to a personal computer so that arbitrary displacements histories could he prescribed in normal and tangential directions. The linear bearings were used to react loads perpendicular to their axes while allowing low friction, parallel movement of the attached grips. Load cells measured the reactions normal and tangential. the loads measured the reactions were recorded by the computer.

• 대한산업공학회지
• /
• 제23권2호
• /
• pp.385-401
• /
• 1997

In this paper, we evaluate the performance of zone-based registration and distance-based registration. First, we propose the mobility model which can be used to analyze the performance of both zone-based registration and distance-based registration. And using the proposed mobility model, we obtain several performance measures and perform numerical computation to compare the performance of two registration methods. Numerical results show that in general zone-based registration needs less number of registration than distance-based registration. On the other hand, if distance-based registration is used, registration load is equally distributed to all cells in a location area and ping-pong phenomenon is not occurred. And when a VLR area is composed of a few location areas, distance-based registration may need less registration load than zone-based registration. Therefore, a proper registration method should be selected considering system circumstances and implementation complexity, and the selected method should be implemented so as to change system parameters according to system circumstances.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.3-7
• /
• 2003

The dynamics of the pantograph motion and contact forces of the high-speed railway are investigated through signals. acquired during a test run. The signals are obtained from accelerometers, load cells, and strain gauges attached to various positions of the pantograph, and they are processed in time-and frequency-domains to evaluate the dynamic characteristics and load forces. The natural frequencies of the pantograph is found to be 8.5Hz. There also are frequency components varying linearly with the train speed. The signal frequency components above 40Hz are attenuated as they pass through the primary and secondary suspensions.