• 전기학회논문지P
• /
• 제63권2호
• /
• pp.95-101
• /
• 2014

In this paper, UPS, with a built-in instantaneous sag drop compensation features, was developed to improve performance. The improved UPS, using instantaneous moving average method, compensates by quickly measuring the voltage and series inverter of half-bridge type, using line-interactive method that links with the voltage of the battery and power source, was developed. In addition, by developing a parallel inverter that uses a high-efficiency PWM switching method, overall UPS system was enhanced. To verify the performance of the proposed algorithm, single-phase 5[kVA] UPS systems were designed and the experimental system was constructed. The low-cost type of Cortex-M3 module CPU STM32F103R8T6 (32[bit]) is attached and the switching time of mode transfer was set within 4 [ms]. THD of the linear load operates in less than 3[%], and the stability of the output voltage operates in approximately ${\pm}2[%]$ range. The superior performance of the operations was confirmed with the system set as above.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.297-300
• /
• 2001

The SMZ half-bridge converter uses the resonance between the inductance of transformer and the resonant capacitances to transfer the input power to the load. In addition to this kind of characteristic of the converter, there are some features such as the capability of soft switching operation, a lower switching loss, and a higher power density in the converter. However in the low-voltage and high-output current applications of the converter, the extremely increased output ripple voltage prevents the converter from normal operation. In order to overcome the drawback of the converter, adding the output filter inductor to the converter, the converter shows the completely different resonant characteristics. In this paper, We analyzed the resonant characteristics of the SMZ converter with the output filter inductor and investigated what the analyzed results affect the converter operation. The experiment of a I50W prototype SMZ converter with 5V output and 310V input is carried out to verity the validity of the analyzed results.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 D
• /
• pp.2528-2530
• /
• 2000

In general, Diode makes a major role in electronic circuit. For example, switching of rectifier, cross current of switching rectifier, energy transfer of electronic element and reverse charge of capacitor, voltage insulation, energy feedback from load to power supply, and such as recovery of storaged energy. Generally, We regard power diode as ideal element, but it has a certain boundary actually, specially, We use diode for detecting circuit peak hold voltage signal. It has cut in voltage. It occurs error of measurement value namely. This error, below in region diode voltage drop (0.7v) measurement value is wholesome signal, Specially, We can not get precision data. Therefore, precision level is low between theoretical and measurement data because of error in actual circuit. Conclusionally, In this paper, We define the error concerning to the power diode characteristics which is used detecting of the minute signal, and recommend the method that minimize measurement error.

• 전력전자학회논문지
• /
• 제26권2호
• /
• pp.82-89
• /
• 2021

This study proposes a DAB two-stage series structure with insulated bidirectional DC-DC converter for two-way power transfer between the renewable energy of high voltages (1 kV and above). The proposed circuit transforms the existing DAB converter into a two-stage series structure to reduce the pressure in the switch. The problem of power imbalance occurring in the design of the DAB converter second-stage series is improved by applying the cell balancing method circuit and the common mode coupled inductor using an external flying capacitor instead of reflecting the existing improvement measures, voltage balance control, and inductor current control. In addition, a no-load supercharging sequence is proposed in high voltages and high-speed switching by using the fixed duty output method. This study presents the analysis results through the structure of the proposed circuit, the principle of improving the power imbalance problem, and simulations. Prototypes were manufactured to meet the specifications of input/output voltage of 1700 V, maximum load of 65 kW, and switching frequency of 51kHz, and the validity of the topology was verified using the experimental results and efficiency data.

• 대한공업교육학회지
• /
• 제33권1호
• /
• pp.265-281
• /
• 2008

본 연구의 목적은 정보통신기술 영역의 데이터 통신 원리 중에서 다중프로세스 방식과 다중 쓰레드 방식의 병행서버에 대해 직접 체험할 수 있는 실습사례를 제시하는 데 있다. 이를 위해 먼저 다중 프로세스 방식인 포크 서버(fork server)와 다중 쓰레드 방식인 쓰레드 서버(thread server), 그리고 쓰레드 클라이언트(thread client)를 구현하였다. 다음에 실험환경으로서 이더넷(ethernet)을 이용한 소규모 네트워크를 구성하였으며 사용자 수에 따른 데이터 전송시간을 측정하였다. 데이터 전송시간을 측정한 결과, 쓰레드 서버가 포크 서버에 비해 약 20~61%의 전송시간 절감율을 보였으며 두 서버 모델 간 전송시간 차이는 사용자 인원수에 비례하였다. 두 서버 모델 간 발생하는 성능차이의 주된 원인은 프로세스 포크(fork)와 쓰레드 생성에 소요되는 시간이 다르기 때문이다. 아울러, 프로세스 간, 쓰레드 간 스케줄링에서 발생하는 문맥전환(context switching) 역시 웹 서버의 부하에 영향을 주는 것을 알 수 있었다. 본 연구를 통해 제시된 실습사례와 측정된 실험데이터는 학교현장에서 수업시간에 데이터통신 원리에 대해 직접 체험할 수 있는 교육적 실습자료로 활용될 수 있다.

• Journal of Power Electronics
• /
• 제18권1호
• /
• pp.277-288
• /
• 2018

Wireless inductive power transfer (IPT) technology is used in many applications today. A compact and high-frequency primary side inverter is one of the most important parts of a WPT system. In this study, a modified class EF-type voltage-fed multi-resonant inverter has been proposed for WPT application at a frequency range of 85-100 kHz. Instead of an infinite input choke inductor, a resonant inductor is used to reduce loss and power density. The peak voltage stress across the MOSFET has been reduced to almost 60% from a class-E inverter using a passive clamping circuit. A simple yet effective design procedure has been presented to calculate the various component values of the proposed inverter. The overall system is simulated using MATLAB/SimPowerSystem to verify the theoretical concepts. A 500-W prototype was built and tested to validate the simulated results. The inverter exhibited 90% efficiency at nearly perfect alignment condition, and efficiency reduced gradually with the misalignment of WPT coils. The proposed inverter maintains zero-voltage switching (ZVS) during considerable load changes and possesses all the inherent advantages of class E-type inverters.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 추계학술대회 논문집
• /
• pp.806-809
• /
• 1996

The present development relates to an apparatus for loading or unloading a workpiece, and more particularly, to an apparatus for loading or unloading a workpiece from a press die or supplier An apparatus for loading or unloading a workpiece has been installed in a press in order to load or unload a workpiece from a press die. There has been known such a loading or unloading apparatus as the apparatus can feed a workpiece in not only the horizontal direction but also in the vortical direction. Press working system in automotive factories are now switching over to a transfer press work ing system. The current problem to be sieved immediately is to automate the existing manual press lines for the manpower saving and speedy production. “Automation system for press line”has just been developed to meet the above trend. The loader and unloader are development under the design concept for high performance, easy control and operational safety to meet the more extensive.

• 한국조명전기설비학회:학술대회논문집
• /
• 한국조명전기설비학회 2004년도 춘계학술대회 논문집
• /
• pp.490-491
• /
• 2004

Recently, sectionalizing switches have been coming to be operated by remote control through the distribution SCADA system. However, the problem of determining the optimal switching sequence is a combinatorial optimization problem, and is quite difficult to solve. Hence, it is imperative to develop practically applicable solution algorithms for this problem. Several efficient algorithms have been developed for finding approximate solutions to such problems. these algorithms create a new arbitral distribution system configuration from an initial configuration, and some of these algorithms do not show a load transfer sequence to reach the objective system.

• Journal of Power Electronics
• /
• 제11권3호
• /
• pp.375-380
• /
• 2011

A STATic synchronous COMpensator (STATCOM) is a shunt connected voltage source converter (VSC) based FACTS controller using Gate Turn Off (GTO) power semiconductor devices employed for reactive power control. The operation principal is similar to that of a synchronous condenser. A typical application of a STATCOM is voltage regulation at the midpoint of a long transmission line for the enhancement of power transfer capability and/or reactive power control at the load centre. This paper presents the modeling of STATCOM with twenty four pulse three level VSC and Type-1 controller to regulate the reactive current or the bus voltage. The performance is evaluated by transient simulation. It is observed that, the STATCOM shows excellent transient response to step change in the reactive current reference. While the eigenvalue analysis is based on D-Q model, the transient simulation is based on both D-Q and 3 phase models of STATCOM (which considers switching action of VSC).

• 한국정보통신학회논문지
• /
• 제24권6호
• /
• pp.809-817
• /
• 2020

소형위성 전력분배 및 전송모듈의 설계와 개발과정에서 딥러닝 알고리즘으로 동적 전력자원의 안정성을 평가하였다. 안정성 평가에 따른 요구사항은 소형위성 탑재체인 SAR 레이더의 전력분배모듈과 수요모듈의 전력전송기능을 구성하였다. 전력모듈인 PDM을 구성하는 스위칭 전력부품의 성능확인을 위해 동적신경망을 활용하여 신뢰성을 검증하였다. 신뢰성 검증을 위한 딥러닝 적용대상은 소형위성 본체로부터 공급되는 전력에 대한 탑재체의 전력분배기능이다. 이 기능에 대한 성능확인을 위한 모델링 대상은 출력전압변화추이(Slew Rate Control), 전압오류(Voltage Error), 부하특성(Load Power)이다. 이를 위해 첫째, 모델링으로 Coefficient Structure 영역을 정의하고 PCB모듈을 제작하여 안정성과 신뢰성을 비교 평가하였다. 둘째, 딥러닝 알고리즘으로 Levenberg-Marquare기반의 Two-Way NARX신경망 Sigmoid Transfer를 사용하였다.