• 대한전기학회논문지:전력기술부문A
• /
• 제48권7호
• /
• pp.872-880
• /
• 1999

This paper presents an algorithm that can calculate the evaluation index of power system from the transfer capability point of view. The algorithm adopts a successive linear programming skill to solve an optimal solution. Two indices which are transfer margin index and economic matching index have been developed. Prior to calculating these indices, Maximum Load supplying Capability(MLSC) and Economic Load Supplying Capability(ELSC) are utilized as basic data. For man-machine interface, graphical user interface has been implemented so that an unified software package PSTCP(Power System Transfer Capability Program) has been developed. KEPCO systems planned up to 2006 year have been tested to show effectiveness and usefulness of the PSTCP for power system planning stages.

• 대한전기학회논문지
• /
• 제44권1호
• /
• pp.21-24
• /
• 1995

The larger and the more complicated the system size and configuration grow, the more serious the system loss problem becomes. Exessive system loss causes severs system voltage depression, which even may result in system voltage collapse. This paper proposes an effective tool for minimizing the system power loss by optimal re-location of the static condenser based on the system loss sensitivity index .lambda.$_{Q}$. It is possible to determine the optimal location and amount of VAR investment for minimizing the system loss by priority of .lambda.$_{Q}$ index given for each bus. Several computational techniques for avoiding divergency of the load flow solution are proposed. The loss sensitivity index .lambda.$_{Q}$ uses information of normal power flow equations and their Jacobians. Two case studies proved the effectiveness of the algorithm proposed.posed.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2003년도 추계 학술발표회논문집
• /
• pp.271-279
• /
• 2003

The objective of this study is to evaluate the damage of the reinforced concrete bridge piers. For the purpose of this research, twelve reinforced concrete specimens were fabricated and experimented with quasi-static test method. The selected test parameters are lap splice, axial load ratio, confinement steel ratio and number of loading cycle. The method of evaluate of damage index is the model proposed by Park and Ang. In accordance with this research, the most effective test parameter is lap splice of longitudinal steel. Therefore, the retrofit scheme of reinforced concrete bridge piers with lap splice of longitudinal steel, which was constructed before 1992, must be settled without delay. Otherwise, the effect of axial force is trivial. The more confinement steel is less damage index and more loading cycle lead to raise damage. The damage statement proposed Park and Ang is the same with experimental results.

• Journal of Electrical Engineering and Technology
• /
• 제2권4호
• /
• pp.420-427
• /
• 2007

This paper highlights the comparison of a proposed methods named adaptive undervoltage load shedding based PTSI techniques for undervoltage load shedding and two previous methods named Fixed Shed Fixed Delay (FSFD) and Variable Shed Variable Delay (VSVD) for avoiding voltage collapse. There are three main area considerations in load shedding schemes as the amount of load to be shed, the timing of load shedding event, and the location where load shed is to be shed. The proposed method, named as adaptive UVLS based PTSI seem to be most appropriate among the uncoordinated schemes. From the simulation result can be shown the Adaptive UVLS based PTSI give faster response, accurate and very sensitive control for the UVLS control technique. This technique is effectively when calculating the amount to be shed. Therefore, it is possible to bring the voltage to the threshold value in one step. Thus, the adaptive load shedding can effectively reduce the computational time for control strategy.

• Structural Engineering and Mechanics
• /
• 제16권4호
• /
• pp.441-468
• /
• 2003

This paper investigates the structural behavior of modular falsework system under sequential pattern loads. Based on the studies of 25 construction sites, the pattern load sequence modeling is defined as models R (rectangle), L and U. The study focuses on the system critical loads, regions of largest reaction forces, discrepancy between the pattern load and the uniform load, and the warning-system plan. The analysis results show that the critical loads of modular falsework systems with sequential pattern loads are very close to those with the uniform load used in design. The regions of largest reaction forces are smaller than those calculated by the uniform load. However, the regions of largest reaction forces of three models under sequential pattern loads can be considered as the crucial positions of warning-system based on the measured index of loading. The positions of the sensors for the warning-system for these three different models are not identical.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.427-434
• /
• 2010

Load Resistance Factor Design method is used increasingly in geotechnical design world widely and resistance factors for drilled shafts are suggested by AASHTO. However, these resistance factors are determined for intact rock conditions, by comparison most of bedrocks in Korea are weathered condition, so that applying the AASHTO resistance factors is not reasonable. Thus, this study suggests the proper resistance factors for design of drilled shaft in Korea. The 22 cases of pile load test data from 8 sites were chosen and reliability-based approach is used to analyze the data. Reliability analysis was performed by First Order Second Moment Method (FOSM) applying 4 bearing capacity equations. As a result, when the Factor of Safety(FOS) were selected as 3.0, the target reliability index($\beta_c$) were evaluated about 2.01~2.30. Resistance factors and load factors are determined from optimization based on above results. The resistance factors ranged between 0.48 and 0.56 and load factor for dead load and live load are evaluated approximately 1.25 and 1.75 respectively. However, when the target reliability are considered as 3.0, the resistance factors are evaluated as approximately 50% of results when the target reliability index were 2.0.

• 대한지리학회지
• /
• 제43권6호
• /
• pp.808-823
• /
• 2008

하천 퇴적물질의 마식은 하상과의 충돌과 퇴적물질 입자간의 충돌에 의하여 발생한다. 하천 퇴적물질의 물리적 강도는 마식에 대한 저항의 정도를 나타내는 것으로 정의할 수 있으나, 이에 대한 실증적인 연구는 큰 진전을 보이지 못해왔다. 본 연구에서는 퇴적물질의 마식에 영향을 미치는 요소들(퇴적물질의 물리적강도, 퇴적물질의 크기, 퇴적물질의 양등)의 관계를 파악하기 위해서 마식기를 이용한 물리적 실험을 실시하였으며, 특히 퇴적물질의 물리적 강도가 마식율에 미치는 영향을 분석하는데 강조점을 두고 있다. 이 실험에서는 266개의 퇴적물을 이용했으며, 퇴적물질의 양과 퇴적물질의 평균 무게에 따라 11개의 소집단으로 나눠 실험하였다. 각 실험은 1시간 단위로 이루어 졌으며 퇴적물질은 최장 8시간 동안 마식되었다. 마식율은 각 실험단계마다 퇴적물질 입자 무게의 변동으로 측정하였으며, 총 2,128번의 측정이 이루어졌다. 퇴적물질의 물리적 강도는 시험이 종료한 뒤에 파괴하중을 측정하여 계산한 점 하중강도지수를 통해 측정하였다. 퇴적물질의 점하중강도지수는 마식율과 음의 상관이 있는 것으로 나타났으나, 두 변수들 간의 회귀식의 설명율($R^2$)은 0.22로 나타났다. 퇴적물질의 전반적인 마식은 실험 초기에는 빠르게 진행되지만, 풍화각이 제거된 뒤에는 마식율이 급감하는 경향을 보여주고 있다. 풍화각을 제거하는 초기 단계에는 퇴적물질의 물리적 강도와 마식율의 관계가 미약하지만 이후로 점점 설명율이 상승한다. 이 실험 결과에 의하면 퇴적물질의 물리적 강도는 마식율의 결정적인 설명변수가 아닐 수 있으며, 물리적 속성 이외에도 퇴적물질의 운반조건 등이 마식율에 큰 영향을 주는 것으로 판단된다.

• Journal of Nutrition and Health
• /
• 제42권7호
• /
• pp.622-630
• /
• 2009

The purpose of this study was to establish an association between glycemic index (GI), glycemic load (GL), dietary carbohydrates and diabetes with the context of the current population dietary practice in Korea. The subjects of 3,389 adults (male 1,430, female 1,959) were divided into normal (serum fasting glucose < 100 mg/dL), impaired glucose tolerance (100 ${\leq}$ serum fasting glucose < 126 mg/dL), diabetes (serum fasting glucose > 126 mg/dL) by serum fasting glucose. Anthropometric and hematologic factors, and nutrient intakes, dietary glycemic index (DGI), dietary glycemic load (DGL) were assessed. Multiple logistic regression model was used to determine the odds ratios (ORs) and 95% confidence intervals for relationship of DGI, DGL, carbohydrates intakes, and diabetes. DGI and DGL were not significantly correlated with impaired glucose tolerance and diabetes. However, the risk of impaired glucose tolerance and diabetes showed a tendency to increase as increase of DGI after multivariate adjustment (age, education, income, region area, diabetes family history, smoking, drinking, exercise, energy intake) in male. The risk of impaired glucose tolerance and diabetes showed a tendency to increase in the DGI 71.1-74.8 after multivariate adjustment in female. DGL was inversely related to impaired glucose tolerance and diabetes in male. In female, however, DGL was positively related to impaired glucose tolerance and diabetes. In particular, the risk of diabetes increased positively in level of DGL 260.5, and remained after multivariate adjustment (Q5 vs Q1：2.38, 0.87-6.48). When percent energy intakes from carbohydrates were more than 70%, the risk of impaired glucose tolerance and diabetes increased in both male and female. In particular, when percent energy intakes from carbohydrates were more than 69.9%, the risk of diabetes increased positively in male (Q4 vs Q1：2.34, 1.16-4.17). In conclusion, above 70% energy intakes from carbohydrates appeared to be a risk factor of diabetes. It seemed that the meal with high GI and GL value must be avoided it. And also, the macronutrients of the meal must be properly balanced. In particular, it may be said that it is a preventive way for treatment of the diabetes to avoid eating carbohydrates of much quantity.

• 환경생물
• /
• 제37권4호
• /
• pp.554-567
• /
• 2019

최근 농경지 투입양분으로 인한 환경영향의 우려와 함께 하천 등으로 유출되는 양분의 오염부하 관리가 요구되고 있다. 이에 정부는 국내 농지의 양분 과잉 투입 문제를 해결하기 위해 농경지의 양분관리 목표를 설정하여 관리하는 양분관리제도의 도입을 추진하고 있다. 본 연구는 국내 합리적인 양분관리제도 도입을 위한 양분관리 지표 기준을 설정하고자 도 단위의 양분부하와 양분수지 지표를 분석하고 지표별 특성을 비교 검토하였다. 도 단위 질소와 인성분의 양분부하와 양분수지 분석에서 지역별 양분부하 순위와 양분수지 순위가 다르게 나타나, 지역의 양분수준을 평가하는데 있어 양분부하와 양분수지의 두 지표는 서로 상이한 지표 값을 도출하는 것으로 나타났다. 양분부하와 양분수지 간의 상관관계 분석에서 질소성분의 경우 상관관계 계수(r)는 0.2504로서 5% 유의수준에서 통계적 유의성이 없었으며, 인성분의 경우 상관관계 계수(r)가 0.7375로서 5% 유의수준에서 통계적 유의성이 인정되었다. 따라서 양분관리 지표활용에 있어 인성분의 경우 양분부하와 양분수지 간의 상호 호환성이 나타났으나, 질소 성분의 경우 양분부하와 양분수지 간의 상호 호환성이 없는 것으로 나타났다. 따라서 지역의 양분관리 지표로서 농업환경 특성을 반영하는 양분수지 지표의 활용이 합리적인 것으로 평가되었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권9호
• /
• pp.494-499
• /
• 2004

This paper presents to compute the power economic dispatch, an optimal power flow (OPF) computation algorithm, considering the load power factor limits constraint in developed. Efficient reactive power planning enhances economic operation as well as system security. Accordingly, an adequate level of power factor limits for the load busesshould be evaluated for economic operation. In this paper, the ranges of acceptable load power factors are portrayed as bandwidths of load power factor expressed as a function of load level. The load power factor limits are included and described into the OPF's objective function. The method Proposed is applied to IEEE 26 bus system.