• 한국지형학회지
• /
• 제25권2호
• /
• pp.15-29
• /
• 2018

The sediment transport process in a river reflects the process of geomorphological change in the watershed, influencesthe river bed variation and the river channel migration, and is a parametric phenomenon that exhibits a dynamic self-adjusting process. Sediment load is divided into bedload and suspended load depending on the dominant mechanism. Quantitative sediment load is important information for solving river problems. Because it is difficult and time consuming to measure bedload, compared to that ofsuspended load, data on the sediment transport load and the research required for the gravel-bed rivers are insufficient. This study is to analyze the ratio of the bedload to the total sediment load in gravel-bed rivers. The sediment load ratio in gravel-bed rivers increases with the flow rate per unit width, and the rate of the bedload varies more rapidly than the suspended load. The sediment transport efficiency coefficient has been affected by the ratio of the flow depth to the mean diameter of particles and has been dependent on the shear velocity Reynolds number. So $A^{\ast}$ and $B^{\ast}$ are introduced to compensate for the uncertainties such as bed materials, sediment transport, and flow velocity distribution, and the coefficient of bedload ratio has been presented. For the sediment load data in experimental channels and rivers, A* was 3.1. The dominant variables of $B^{\ast}$ were $u_*d_m/{\nu}$ in the gravel-bed and h/dm in the sand-bed. When $B^{\ast}$ the is the same, in the experimental channels the coefficient of bedload ratio was affected by the bed forms, but in the rivers it was of little difference between the gravel-bed and sand-bed.

• 한국지반공학회논문집
• /
• 제35권1호
• /
• pp.17-30
• /
• 2019

본 연구는 3차원 수치해석을 통해 기존말뚝과 보강말뚝의 하중분담율(Load Distribution Ratio)과 근사적 해석 기법으로 보강말뚝의 축방향 강성(Axial Stiffness)을 산정하였다. 시공단계를 고려하여 말뚝기초의 LDR에 영향을 미치는 인자를 파악하기 위해서 1) 말뚝기초의 강성, 2) 말뚝기초의 선단지지조건, 3) 기초판 접촉효과, 4) 보강말뚝의 설치위치에 따라 해석을 수행하여 기존말뚝과 신설말뚝의 하중분담율 거동을 확인하였다. 또한 5) 기존말뚝의 축방향 강성($K_{ve}$)를 사용하여 말뚝지지 전면기초의 3차원 근사적 해석기법(YSPR)으로 보강말뚝의 직경에 따른 강성($K_{vr}$)을 산정하고, 장기간 사용으로 인한 경화를 고려하여 $K_{ve}$를 3단계로 나누어 감소시켜 보강말뚝의 강성 변화의 경향을 살펴보고, 신설 말뚝의 강성 산정방법을 제시하였다.

• Journal of Biosystems Engineering
• /
• 제8권2호
• /
• pp.11-17
• /
• 1983

Stress distribution under a driving lugged wheel was obtained by photoelastic method. The distribution showed two distinct parts, one part is due to sinkage and other due to compression. Results of the study are summarized as follows. 1. The tangential reactions of sinkage as well as compressing parts were directly proportional to tangential load to the driving wheel, that's appeared to be thrust of the driving wheel. The normal reactions of both sinkage and compressing parts were directly proportional to the vertical load to the driving wheel, that's appeared to be resistance against wheel motion. 2. When the tangential load was constant, changing the vertical load did not show any significant thrust variation of the driving wheel. 3. Under the condition of this experiment, the ratio of vertical load to tangential load (T.L/V.L) must be greater than 1.0 in order for the wheel to roll.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.291-311
• /
• 2012

The multi-span suspension bridge having double main cables in the vertical plane is investigated regarding endurance of live load distribution in the case of non-displaced pylon and pylon displacement. The coefficient formula of live load distribution described as the ratio of live load on the bottom cable to the top cable is obtained. Based on this formula, some function in respect of this bridge are derived and used to analyze its characteristics. This analysis targets the cable force, the cable sag and the horizontal displacement at the pylon top under live load etc. The results clarified that the performance of the live load distribution and the horizontal force of cables in the case of non-deformed pylon has a similar tendency to those in the case of deformed pylon, and the increase of pylon rigidity can increase live load distributed to the bottom cable and slightly raise the cable horizontal force under live load. However, effect on the vertical rigidity of bridge and the horizontal force increment of cables caused by live load is different in the case of non-deformed pylon and deformed pylon.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.197-200
• /
• 2008

철근콘크리트 코벨은 전단지간대 유효깊이의 비가 1보다 작은 부재로서, 주로 보의 하중을 기둥으로 전달하기 위해 사용된다. 이러한 철근콘크리트 코벨의 극한강도 및 거동은 전단지간대 유효깊이의 비, 콘크리트의 압축강도, 철근의 배근형태와 배근량, 그리고 부재의 형상 등 다양한 변수들의 영향을 받는다. 본 연구에서는 이러한 철근콘크리트 코벨의 강도 및 거동 특성을 모두 반영하여 설계를 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현행 설계기준의 스트럿-타이 모델방법을 부정정 스트럿-타이 모델을 이용한 철근콘크리트 코벨의 설계에 합리적으로 적용하기 위해 수평 트러스 메커니즘에 의해 전달되는 하중의 크기 즉 부정정 스트럿-타이 모델의 하중분배율을 제안하였다. 제안한 하중분배율을 ACI 318-05 스트럿-타이 모델 설계규정에 적용하여 파괴실험이 수행된 30개 철근콘크리트 코벨에 대한 극한강도 평가를 수행하였으며, 그 결과를 실험결과 및 ACI 318-05 설계기준에 의한 극한강도 평가결과와 비교하였다.

• Journal of electromagnetic engineering and science
• /
• 제18권4호
• /
• pp.221-230
• /
• 2018

A method to control the power distribution among receivers by the load values in a single-input, multiple-output (SIMO) wireless power transfer (WPT) system is investigated. We first derive the value of loads to maximize total efficiency. Next, a simple, but effective analytical formula of the load condition for the desired power distribution ratio is presented. The derived load solutions are simply given by system figure of merits and desired power ratios. The formula is validated with many numerical examples via electromagnetic simulations. We demonstrate that with the choice of loads from this simple formula, the power can be conveniently and accurately distributed among receivers for most practical requirements in SIMO WPT systems.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.105-107
• /
• 2015

본 논문에서는 네트워크의 유동확률밀도를 이용하여 분산적인 라우팅 경로를 분석하는 LTD(Load Tolerance Density-distribution) 알고리즘을 제안한다. 모바일 애드 혹 네트워크(Mobile Ad-hoc Networks)는 유동성을 가진 노드들로 구성된 네트워크로서, 토폴로지의 변화가 빈번하다. 토폴로지의 변화를 줄이기 위해 계층적 네트워크가 연구되었으나, 특정 클러스터 헤드노드에게 부하가 집중되어 통신이 단절된다. 본 논문에서 제안하는 알고리즘은 포아송 분포를 이용한 노드의 유동확률밀도를 계산하여, 분산적인 라우팅 경로를 제공하는 알고리즘이다. 모의실험에서, 본 논문에서 제안한 알고리즘의 패킷 전송률은 비교 알고리즘에 비해 향상된 결과를 보여주었다.

• Journal of Communications and Networks
• /
• 제16권5호
• /
• pp.548-558
• /
• 2014

Load distribution is vital to the performance of multipath transport. The task becomes more challenging in real-time multimedia applications (RTMA), which impose stringent delay requirements. Two key issues to be addressed are: 1) How to minimize end-to-end delay and 2) how to alleviate packet reordering that incurs additional recovery time at the receiver. In this paper, we propose sub-packet based multipath load distribution (SPMLD), a new model that splits traffic at the granularity of sub-packet. Our SPMLD model aims to minimize total packet delay by effectively aggregating multiple parallel paths as a single virtual path. First, we formulate the packet splitting over multiple paths as a constrained optimization problem and derive its solution based on progressive approximation method. Second, in the solution, we analyze queuing delay by introducing D/M/1 model and obtain the expression of dynamic packet splitting ratio for each path. Third, in order to describe SPMLD's scheduling policy, we propose two distributed algorithms respectively implemented in the source and destination nodes. We evaluate the performance of SPMLD through extensive simulations in QualNet using real-time H.264 video streaming. Experimental results demonstrate that: SPMLD outperforms previous flow and packet based load distribution models in terms of video peak signal-to-noise ratio, total packet delay, end-to-end delay, and risk of packet reordering. Besides, SPMLD's extra overhead is tiny compared to the input video streaming.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.193-194
• /
• 2009

본 연구에서는 프리텐션 콘크리트 깊은 보의 강도 및 거동 특성을 모두 반영하여 강도해석을 수행할 수 있는 부정정 스트럿-타이 모델을 제안하였다. 또한 현행 설계기준의 스트럿-타이 모델 방법을 부정정 스트럿-타이 모델을 이용한 프리텐션 콘크리트 깊은 보의 강도해석에 합리적으로 적용하기 위해 수직 트러스 메커니즘에 의해 전달되는 하중의 크기 즉 부정정 스트럿 타이 모델의 하중 분배율을 제안하였다.

• 한국물환경학회지
• /
• 제34권5호
• /
• pp.494-502
• /
• 2018

The purpose of this study was to understand distribution characteristics of organic matters through concentration of $BOD_5$, $COD_{Mn}$ and TOC in 31 streams in Han River region, and to establish the relationship among organic matter concentration, and discharge load and flow rate. Concentration of $BOD_5$ and TOC in 22 streams were above IV grade except 9, and the average 80.9 % of total organic matter (by TOC) accounted for dissolved organic type. Correlation among organic matter parameters were higher ($r^2$ > 0.78) and the relationship between TOC and $COD_{Mn}$ concentration was higher than $BOD_5$. Ratio of biodegradable organic matter/total organic matter in the 31 streams was estimated at 41.4 % with $BOD_5$ oxidation rate, and 78.0 % with $BOD_5/COD_{Mn}$ concentration ratio. Ratio of $NBOD/BOD_5$ concentration in four sites with $BOD_5/COD_{Mn}$ concentration ratio exceeding 1 ranged from 54.5 % ~ 79.3 %. Among 979 flow rate data measured at 31 streams, 87 % of measured data was below 0.1 cms and increased water pollution under low flow conditions. Correlation between $BOD_5$ concentration and $BOD_5$ discharge load in the watershed was low, and it was revealed that several streams have more $BOD_5$ delivery load than $BOD_5$ discharge load. Results suggest that many biodegradable forms of organic matter are being introduced into the stream from pollutant sources in the watershed.