• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 2002년도 추계총회 및 학술발표회
• /
• pp.15-15
• /
• 2002

• 한국전기전자재료학회논문지
• /
• 제18권2호
• /
• pp.142-147
• /
• 2005

In this work, a gel polymer electrolyte (GPE) was prepared using polyoxyalkylene glycol acrylate (POAGA) as a macromonomer LiCoO$_2$/GPE/graphite cells were prepared and their electrochemical properties were evaluated at various current densities and temperatures. The ionic conductivity of the GPE was more than 6.2${\times}$10$^{-3}$ S$.$$cm^{-1}$ / at room temperature. The GPE had good electrochemical stability up to 4.5 V vs. Li/Li$^{+}$. POAGA-based cells were showed good electrochemical performances such as rate capability, low-temperature performance, and cycleability. The cells, also, passed a safety test such as the overcharge and nail-penetration test.t.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.142-149
• /
• 2022

In increasing the safety and usage of lithium-ion battery packs, reducing the parameter deviation between cells, such as voltage and temperature within the battery pack, is important. In this study, we propose a screening method to reduce parameter deviation between cells in battery packs. Screening algorithms are constructed based on Fuzzy logic and quantitatively express the similarities between battery cells. Screening is applied by utilizing series resistance components after experiments of electrical characteristics that consider the operation status of battery packs. After screening, the standard deviation of series resistance components according to the similarity ranking is compared and analyzed, and their conformity are verified with the algorithm parameters.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 추계학술대회
• /
• pp.70-72
• /
• 2019

For the safe and reliable operation of Lithium-ion batteries in Electric Vehicles (EVs) or Energy Storage Systems (ESSs), it is essential to have accurate information of the battery such as State of Charge (SOC). Many kinds of different techniques to estimate the SOC of the batteries have been developed so far such as the Kalman Filter. However, when it is applied to the multiple number of batteries it is difficult to maintain the accuracy of the estimation over all cells due to the difference in parameter value of each cell. Moreover the difference in the parameter of each cell may become larger as the operation time accumulates due to aging. In this paper a novel Deep Neural Network (DNN) based SOC estimation method for multi cell application is proposed. In the proposed method DNN is implemented to learn non-linear relationship of the voltage and current of the lithium-ion battery at different SOCs and different temperatures. In the training the voltage and current data of the Lithium battery at charge and discharge cycles obtained at different temperatures are used. After the comprehensive training with the data obtained with a cell resulting estimation algorithm is applied to the other cells. The experimental results show that the Mean Absolute Error (MAE) of the estimation is 0.56% at 25℃, and 3.16% at 60℃ with the proposed SOC estimation algorithm.

• 전기화학회지
• /
• 제11권2호
• /
• pp.125-129
• /
• 2008

리튬이온폴리머전지는 휴대용 전자기기와 전기자동차 등의 차세대 동력원으로 주목을 받고 있다. 본 연구에서는 폴리에틸렌 분리막에 소량의 부기 화합물과 고분자를 코팅하여 제조된 표면 개질 분리막을 리튬이온폴리머전지에 적용함으로써 전지 특성을 향상시키고자 하였다. 불화 알루미늄과 아크릴로니트릴-메틸 메타크릴레이트 공중합체를 폴리에틸렌 지지체에 코팅하여 얻어진 표면 개질 분리막을 이용하여 제조된 리튬이온폴리머전지는 충 방전 싸이클 과정 중에 균일한 전도성 고체 전해질 계면이 전극 표면에 형성되어 낮은 계면 저항값을 보였으며, 이에 따라 불화 알루미늄을 포함하고 있지 않는 리튬이온폴리머전지와 비교하여 싸이클 특성과 고율 방전 특성이 크게 향상되었다. 표면 개질된 분리막을 이용하여 제조된 리튬이온폴리머전지를 0.5 C rate로 충 방전한 결과, 초기 방전용량 150 mAh/g을 나타내었으며, 300싸이클에서 133 mAh/g의 방전 용량을 유지하여 우수한 용량 보존특성을 나타내었다.

• 한국재료학회지
• /
• 제28권6호
• /
• pp.337-342
• /
• 2018

Using a high pressure homonizer, we report on the electrochemical performance of $Li_4Ti_5O_{12}(LTO)$ particles manufactured as anode active material for lithium ion battery. High-pressure synthesis processing is performed under conditions in which the mole fraction of Li/Ti is 0.9, the synthesis pressure is 2,000 bar and the numbers of passings-through are 5, 7 and 10. The observed X-ray diffraction patterns show that pure LTO is manufactured when the number of passings-through is 10. It is found from scanning electron microscopy analysis that the average size of synthesized particles decreases as the number of passings-through increases. $LiCoO_2-based$ active cathode materials are used to fabricate several coin half/full cells and their battery characteristics such as lifetime, rate capability and charge transfer resistance are then estimated, revealing quite good electrochemical performance of the LTO particles as an effective anode active material for lithium secondary batteries.

• Bulletin of the Korean Chemical Society
• /
• 제23권8호
• /
• pp.1144-1148
• /
• 2002

We prepared the polyaniline (Pani) film and powder by chemical polymerization and doping with different dopants and also investigated the capability of Li//polyaniline cells after assembling. The oxidation/reduction potentials and electrochemical reaction of Li//polyaniline cells were tested by cyclic voltammetry technique. The Li//Pani-HCl cells with 10% and 20% conductors show a little larger specific discharge capacities than that without conductor. The highest discharge capacity of almost 50 mAh/g at 100th cycle is also achieved. However, Li//Pani-LiPF6 with 20% conductor shows a remarkable performance of ~90 mAh/g at 100th cycle. This is feasible value for using as the positive electrode material of lithium ion secondary batteries. It is also proved that the powder type electrode of Pani is better to use than the film type one to improve the specific discharge capacity and its stability with cycle.

• 전기화학회지
• /
• 제2권2호
• /
• pp.75-80
• /
• 1999

Li-ion 2차전지는 정극재료로 리튬전이금속산화물을, 부극재료로 탄소를 사용한다. 고용량 및 장수명을 지닌 Li-ion 2차 전지를 제작하기 위하여, 충전중에 탄소표면에 리튬 석출이 없이 전극 활물질의 이용율은 가능한 높아야 한다. 정극 및 부극 재료의 balance 및 적절한 충전 방식이 Li-ion 2차전지의 설계에 있어서 중요한 요소이다. 본 연구에서는 $LiCoO_2/MPCF$전지의 성능에 미치는 정$\cdot$부극 중량비의 효과를 고찰하였다. 먼저 각 반전지의 충방전 특성을 평가하였다. 그리고 흑연화 MPCF를 부극으로, $LiCoO_2$를 정극으로 사용하여 원통형 Li-ion 2차전지를 제작하였다. 기준전극으로 리튬금속을 사용하여 $LiCoO_2/MPCF$전지에서 각 반전지의 전위를 측정하였다. 또한 중량비에 따른 $LiCoO_2/MPCF$ 전지의 충방전 수명 성능을 평가하였다. 시험 결과, $LiCoO_2$ 정극의 이용율은 중량비에 의존하지 않지만, MPCF부극 이용율은 중량비에 크게 의존하였다. 또한, $LiCoO_2/MPCF$전지의 최적 중량비는 $2.0\~2.2$인 것으로 판단되었다.

• 한국전기전자재료학회논문지
• /
• 제15권12호
• /
• pp.1033-1038
• /
• 2002

In this study, urethane acrylate macromer was synthesized and it was used in a gel polymer electrolyte (GPE), and then its electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were Prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor consisting of urethane acrylate (UA), hexanediol dimethacrylate (HDDA) and benzoyl peroxide (BPO) had a low viscosity relatively ionic conductivity of the gel polymer electrolyte with UA at room temperature and -20$\^{C}$ was ca. 4.5 $\times$ 10$\^$-3/S$.$cm$\^$-1/ and 1.7 x 10$\^$-3/ S$.$cm$\^$-1/, respectively GPR was stable electrochemically up to potential of 4.i V vs. Li/Li$\^$+/. LiCoO$_2$/GPE/graphite cells showed good a high-rate and a low-temperature performance.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.994-1000
• /
• 2003

In this study, gel polymer electrolytes (GPE) with semi-interpenerating network of poly (methyl methacrylate) and hexanediol dimethacrylate were synthesized and their electrochemical performances were evaluated. LiCoO$_2$/GPE/graphite cells were prepared and their performances depending on discharge currents and temperatures were evaluated. The precursor containing 5 vol% curable mixture had a low viscosity relatively. GPE showed good electrochemical stability up to potential of 4.8 V vs. Li/Li$\^$+/. Ionic conductivity of the gel polymer electrolyte at room temperature and -20$^{\circ}C$ was ca. 5.9 and 1.4${\times}$10$\^$-3/ Scm$\^$-1/, respectively. LiCoO$_2$/GPE/graphite cells showed good rate capability, low-temperature performance and cycleability.