• 제목/요약/키워드: Liquid-liquid extraction (LLE)

검색결과 66건 처리시간 0.028초

용매추출(溶媒抽出)의 일반적(一般的) 원리(原理) (Liquid-Liquid Extraction General Principles - A Review)

  • 이진영
    • 자원리싸이클링
    • /
    • 제18권6호
    • /
    • pp.3-9
    • /
    • 2009
  • 본 총설은 용매추출(또는 액-액 추출)에 대한 일반적인 원리와 추출제별 용매추출 공정의 기초 원리를 소개하고 있다. 용매추출은 서로 섞이지 않는 두 상(phase)간에 화합물이 한 상(phase)에서 다른 상으로 이동하는 현상을 이용하는 공정이다. 초기에는 분석화학 분야에서 용매추출의 간편성, 신속성 및 넓은 적용성 때문에 많이 사용되었으며, 분액깔데기와 같은 간단한 도구로 수분내에 추출실험을 완료할 수 있다는 장점이 있다.

Optimization and Evaluation of Organic Acid Recovery from Kraft Black Liquor Using Liquid-Liquid Extraction

  • Kwon, Hee Sun;Um, Byung Hwan
    • Korean Chemical Engineering Research
    • /
    • 제54권6호
    • /
    • pp.753-761
    • /
    • 2016
  • Liquid-liquid extraction (LLE) can be used for the recovery of acetic acid from black liquor prior to bioethanol fermentation. Recovery of value-added chemicals such as acetic-, formic- and lactic acid using LLE from Kraft black liquor was studied. Acetic acid and formic acid have been reported to be strong inhibitors in fermentation. The study elucidates the effect of three reaction parameters: pH (0.5~3.5), temperature ($25{\sim}65^{\circ}C$), and reaction time (24~48 min). Extraction performance using tri-n-octylphosphine oxide as the extractant was evaluated. The maximum acetic acid concentration achieved from hydrolyzates was 69.87% at $25^{\circ}C$, pH= 0.5, and 36 min. Factorial design was used to study the effects of pH, temperature, and reaction time on the maximum inhibitor extraction yield after LLE. The maximum potential extraction yield of acetic acid was 70.4% at $25.8^{\circ}C$, pH=0.6 and 37.2 min residence time.

액체 추출법과 고체상 추출법에 의한 수질 중 유해물질 농축법 비교 (Comparison of Liquid-Liquid Extraction and Solid-Phase Extraction Coupled with GC/MS for Determination of Priority Pollutants in Water)

  • 육근성;홍사문;김종호
    • 분석과학
    • /
    • 제7권4호
    • /
    • pp.441-453
    • /
    • 1994
  • 수질에서 유해물질을 농축하는 방법으로 액체 추출법과 고체상 추출법을 GC/MS를 검출기로 사용하여 비교하였다. 비휘발성 유해물질 중 11종의 산과 44종의 염기/중성 화합물들을 reagent water에 첨가하여 분석한 결과, 액체추출법은 54종의 화합물에 대해 91%의 평균회수율과 4.6%의 평균상대표준편차를 나타내었으며, 고체상 추출법은 52종의 화합물에 대해 63%의 평균회수율과 8.9%의 평균상대표준편차를 보였다. 두 방법의 검출한계는 $1{\sim}5{\mu}g/l$였다.

  • PDF

Recovery of Acetic Acid from An Ethanol Fermentation Broth by Liquid-Liquid Extraction (LLE) Using Various Solvents

  • Pham, Thi Thu Huong;Kim, Tae Hyun;Um, Byung-Hwan
    • Korean Chemical Engineering Research
    • /
    • 제53권6호
    • /
    • pp.695-702
    • /
    • 2015
  • Liquid-liquid extraction (LLE) using various solvents was studied for recovery of acetic acid from a synthetic ethanol fermentation broth. The microbial fermentation of sugars presented in hydrolyzate gives rise to acetic acid as a byproduct. In order to obtain pure ethanol for use as a biofuel, fermentation broth should be subjected to acetic acid removal step and the recovered acetic acid can be put to industrial use. Herein, batch LLE experiments were carried out at $25^{\circ}C$ using a synthetic fermentation broth comprising $20.0g\;l^{-1}$ acetic acid and $5.0g\;l^{-1}$ ethanol. Ethyl acetate (EtOAc), tri-n-octylphosphine oxide (TOPO), tri-n-octylamine (TOA), and tri-n-alkylphosphine oxide (TAPO) were utilized as solvents, and the extraction potential of each solvent was evaluated by varying the organic phase-to-aqueous phase ratios as 0.2, 0.5, 1.0, 2.0, and 4.0. The highest acetic acid extraction yield was achieved with TAPO; however, the lowest ethanol-to-acetic acid extraction ratio was obtained using TOPO. In a single-stage batch extraction, 97.0 % and 92.4 % of acetic acid could be extracted using TAPO and TOPO when the ratio of organic-to-aqueous phases is 4:1 respectively. A higher solvent-to-feed ratio resulted in an increase in the ethanol-to-acetic acid ratio, which decreased both acetic acid purity and acetic acid extraction yield.

A Simple and Efficient Method to Determine Rivaroxaban in Rat Plasma Using Liquid-Liquid Extraction and LC-MRM

  • Lee, Hyo Chun;Kim, Dong Yoon;Choi, Min-Jong;Jin, Sung Giu;Choi, Yong Seok
    • Mass Spectrometry Letters
    • /
    • 제10권2호
    • /
    • pp.66-70
    • /
    • 2019
  • Rivaroxaban (RRN) is the first available active direct factor Xa inhibitor (anticoagulant) with oral administration. Due to its success in market, there have been efforts to develop various RRN formulations, and the development of good analytical methods for its in vivo evaluation is an essential prerequisite. Thus, here, a simple and efficient method to determine RRN in rat plasma using liquid-liquid extraction (LLE) and liquid chromatography and multiple reaction monitoring (LC-MRM) was presented. The use of ethyl acetate as the LLE solvent results appropriate extraction and purification of RRN and it also helps the significant reduction of rat plasma volume required for RRN quantitation. The developed method showed good analytical performance including specificity, linearity ($r^2{\geq}0.999$ within 0.5 - 500 ng/mL), sensitivity (the lower limit of quantitation at 0.5 ng/mL), accuracy (89.3 - 107.0%), precision (${\geq}12.7%$), and recovery (89.2 - 105.7%). Additionally, RRN in sample extracts showed good stability. Finally, the applicability of the validated method to the PK evaluation of RRN was confirmed after its oral administration to normal rats. The present method is the first analytical method employing LLE for the simple and efficient extraction and purification of RRN in rat plasma. Therefore, the present method can contribute to the development of new RRN formulations as well as to the monitoring of RRN in special clinical situations through its efficient determination in various samples with or without minor modification.

Determination of Corticosteroids in Moisturizers by LC-MS/MS

  • Park, Sumin;Choi, Gye Young;Lee, Seon-Ah;Kim, Hyun Jeong;Yum, Hye Yung;Paeng, Ki-Jung
    • Mass Spectrometry Letters
    • /
    • 제7권1호
    • /
    • pp.26-29
    • /
    • 2016
  • Simultaneous determination of three corticosteroids (clobetasol propionate, betamethasone dipropionate, fluticasone propionate) in moisturizers was performed by using liquid chromatography (LC) coupled with tandem mass spectrometry (MS/MS). Sample preparation was conducted by the liquid-liquid extraction (LLE). Moisturizers include emulsifying agent and it forms micelles. In order to improve the extraction efficiency of corticosteroids trapped in micelle, newly developed-optimized extraction conditions which can remove the matrix effect from moisturizers was applied with various pH conditions in LLE extraction stage of sample preparation. Thus, the addition of 10 μL of 1 M HCl into moisturizers sample before extraction could improve the extraction efficiency. For the quantitative analysis, SRM table that contained specific transition of all of target corticosteroids was created. The developed method was validated for linearity, accuracy, precision, limit of detection (LOD), limit of quantization (LOQ) and recovery. Over the 0.99 r2 value was obtained in calibration standard range. Effective accuracy and precision were also obtained. LODs were below 31 ng/mL and LOQs were estimated below 94 ng/mL for all corticosteroids tested.

시료 농축 후 액-액-추출과 GC-MS를 이용한 염소 소독 음용수중 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone(MX)의정량 분석 (Quantitative determination of 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone (MX) in chlorinated drinking water using sample enrichment followed by liquid-liquid extraction and GC-MS)

  • 김희갑;송병열
    • 분석과학
    • /
    • 제29권1호
    • /
    • pp.29-34
    • /
    • 2016
  • 염소로 소독된 음용수에서 수백 ng/L의 농도까지 검출되는 3-chloro-4-(dichloromethyl)-5-hydroxy-2(5H)-furanone(MX)를 시료 농축 후 액-액 추출(LLE), 메틸 유도체화 및 GC-MS로 정량 분석하였다. 4 L의 물 시료를 감압회전증발기를 사용해 30 ℃에서 0.4 L로 농축하였다. 물 중의 MX는 ethyl acetate(100 mL × 2)를 용매로 사용하여 추출하였으며, 추출액 중 MX는 10 % H2SO4 in methanol로 methyl 유도체를 만들었다. MX의 회수율은 73.8 %이었으며, 이는 수지 흡착법의 38.1 %보다 높았다. 정량한계와 반복성(RSD)은 각각 10 ng/L와 2.2 %로 추정되었다. 이 결과는 시간이 더 많이 소요되는 수지 흡착법의 대체 방법으로 LLE가 사용될 수 있다는 것을 보여 주었다.

Integration of Headspace Solid Phase Micro-Extraction with Gas Chromatography for Quantitative Analysis of Formaldehyde

  • Lo, Kong Mun;Yung, Yen Li
    • Bulletin of the Korean Chemical Society
    • /
    • 제34권1호
    • /
    • pp.139-142
    • /
    • 2013
  • A study was carried out to evaluate the solid phase micro-extraction (SPME) for formaldehyde emission analysis of uncoated plywood. In SPME, formaldehyde was on-fiber derivatized through headspace extraction and analyzed by gas chromatography coupled with mass spectrometry (GC/MS). The SPME was compared with desiccators (DC-JAS 233), small-scale chamber (SSC-ASTM D6007) and liquid-liquid extraction (LLE-EPA 556) methods which were performed in accordance with their respective standards. Compared to SSC (RSD 4.3%) and LLE (RSD 5.0%), the SPME method showed better repeatability (RSD 1.8%) and not much difference from DC (RSD 1.4%). The SPME has proven to be highly precise (at 95% confidence level) with better recovery (REC 102%). Validation of the SPME method for formaldehyde quantitative analysis was evidenced. In addition, the SPME by air sampling directly from plywood specimens (SPME-W) correlated best with DC ($r^2$ = 0.983), followed by LLE ($r^2$ = 0.950) and SSC ($r^2$ = 0.935).

A Method to Monitor Dutasteride in Rat Plasma Using Liquid-Liquid Extraction and Multiple Reaction Monitoring: Comparisons and Validation

  • Kang, Myung Joo;Cho, Ha Ra;Lee, Dong Hoon;Yeom, Dong Woo;Choi, Young Wook;Choi, Yong Seok
    • Mass Spectrometry Letters
    • /
    • 제5권3호
    • /
    • pp.79-83
    • /
    • 2014
  • Three different dutasteride extraction methods were compared and a method based on liquid-liquid extraction (LLE) using methyl tert-butyl ether and methylene chloride was proved to be more effective than others for the extraction of dutasteride and finasteride, the internal standard (IS), from rat plasma. Additionally, a method composed of the LLE extraction, liquid chromatography, and multiple reaction monitoring (MRM) to target dutasteride and IS was validated by assessing specificity, linearity ($r^2$ = 0.9993, 5 - 400 ng/mL), sensitivity (the limit of detection: 4.03 ng/mL; the limit of quantitation: 12.10 ng/mL), accuracy (intra-day: 89.4 - 105.9%; inter-day: 84.9 - 100.9%), precision (intra-day: 0.8 - 6.9%; inter-day: 2.9 - 15.9%), and recovery (84.7 - 107.8%). Since the validated method was successfully applied to a pharmacokinetic study of dutasteride, it can be useful for the pharmacokinetic evaluation of newly developed dutasteride formulations.

고체상 추출과 GC/MS를 이용한 소변 중 대마 대사체 (THCCOOH) 분석 (Determination of 11-nor-9-carboxy-Δ9-tetrahydrocannabinol (THCCOOH) in human urine by solid-phase extraction and GC/MS)

  • 정재철;김진영;인문교;정원조
    • 분석과학
    • /
    • 제19권5호
    • /
    • pp.441-448
    • /
    • 2006
  • 소변 중 대마 남용여부를 판별하는데 기준이 되는 tetrahydrocannabinol (THC)의 대사체 성분인 11-nor-9-carboxy-${\Delta}^9$-tetrahydrocannabinol (THCCOOH)를 고체상 추출법 (solid-phase extraction, SPE)과 가스크로마토그래피/질량분석법 (GC/MS)을 이용하여 신속하게 분석 할 수 있는 방법을 제시하였다. 본 실험은 시험관에 소변 3 mL를 취해 염기성 (pH 10) 조건에서 가수분해 한 후, 양이온교환 카트리지를 사용하여 THCCOOH 성분을 선택적으로 추출하고, 증발 건고한 다음 유도체 반응을 시켜 GC/MS로 분석하였다. 그 결과 분석방법의 검출한계 (LOD)는 0.4 ng/mL이고, 정량한계 (LOQ)는 1.2 ng/mL이였다. 검정곡선의 직선성 상관계수 ($r^2$)는 1.2 (LLE는 1.3)~50.0 ng/mL의 농도범위에서 0.999를 나타내었다. 그리고 정밀도 (precision)와 정확도 (accuracy)는 모두 ${\pm}1.20%$ 이내로 안정적이었으며, 회수율(recovery)은 83.6~90.7%로 측정되었다. 액체상 추출법 (liquid-liquid extraction, LLE)과 비교할 때, SPE 방법이 회수율은 낮았지만 검출한계, 정량한계, 정밀도 및 정확도에서는 큰 차이가 없었다. 그러나 LLE 방법은 추출과정에 시간과 노력이 많이 드는 반면, SPE 방법은 상대적으로 추출 조작이 간편하고 신속하게 추출되었으며, 추출 잔류물도 깨끗하였다. SPE를 이용한 추출방법을 다수의 대마 흡연자 소변에 적용하였을 때 기존에 사용하던 LLE 방법보다 간편하고, 신속하게 대마 대사체 분석이 가능하였다.