• Journal of Mechanical Science and Technology
• /
• 제17권1호
• /
• pp.139-145
• /
• 2003

Diode laser sensor is conducted to measure the gas temperature in the liquid-gas 2-phase counter flow flame. C$\_$10/H/ sub 22/ and city gas were used as liquid fuel and gas fuel, respectively. Two vibrational overtones of H$_2$O were selected and measurements were carried out in the spray flame region stabilized the above gaseous premixed flame. The path-averaged temperature measurement using diode laser absorption method succeeded in the liquid fuel combustion environment regardless of droplets of wide range diameter. The path-averaged temperature measured in the post flame of liquid-gas 2-phase counter flow flame showed qualitative reliable results. The successful demonstration of time series temperature measurement in the liquid-gas 2-phase counter flow flame gave us motivation of trying to establish the effective control system in practical combustion system. These results demonstrated the ability of real-time feedback from combustor inside using the non-intrusive measurement as well as the possibility of application to practical combustion system. Failure case due to influence of spray flame was also discussed.

• 한국분무공학회지
• /
• 제7권2호
• /
• pp.1-6
• /
• 2002

It is necessary to develope a high frequency diode laser sensor system based on the absorption spectroscopy for the measurement of temperature of the spray flame. DFB diode laser operating near $2.0{\mu}m$ was used to scan over selected $H_2O$ transitions near $1.9{\mu}m\;and\;2.2{\mu}m$, respectively. The measurement sensitivity at wide range of sweep frequency was evaluated using multi-pass cell containing $CO_2$ gas. This diode laser absorption sensor with high temporal resolution up to 10kHz was applied to measure the gas temperature in the spray flame region of liquid-gas 2-phase counter flow flame. The successful demonstration of time series temperature measurement in the spray flame gives us motivation of trying to establish non-intrusive temperature measurement method in the practical spray flame.

• 대한토목학회논문집
• /
• 제44권2호
• /
• pp.183-190
• /
• 2024

폴리우레탄(PU) 폼과 같은 가연성 고분자 건축자재의 화재 안전성을 개선하기 위한 새로운 접근의 나노코팅 기술이 개발되었다. 산화 그래핀 (Graphene oxide, GO)과 같은 2차원 소재는 용액상에서 자기 정렬 및 점탄성적 특성을 보이는 액정성(Liquid Crystalline properties, LC)을 나타내며, 이를 이용하면 특정 농도 범위에서 3차원의 다공성 폼을 포함한 다양한 표면에 균일한 코팅이 가능하다. 또한, GO의 액정성을 이용하여 기능성 복합소재의 나노코팅을 위한 골격 구조체(Scaffold)를 형성할 수 있으며, 여기에 도파민(Dopamine)과 같은 무독성의 항산화성 저분자를 도입 후 폴리도파민(polydopamine, PDA)로의 중합을 유도하여 고난연성의 폴리도파민/산화그래핀 (PDA/GO) 나노복합체 코팅층을 형성할 수 있다. 또한 최종적으로 형성된 PDA/GO 코팅은 GO의 2차원 판상구조로 인하여 균일하게 적층된 나노시트 구조로 안정화되며, 이러한 구조적 특성으로 인하여 가스상의 유해 연소생성물의 발생과 확산을 효과적으로 저감할 수 있는 가스 차폐 효과도 유도할 수 있다. 이러한 2차원 소재의 액정성을 활용한 난연성 나노복합소재 코팅 기술은 다양한 유형의 고분자 건축 자재의 화재 안전성을 효과적으로 개선할 수 있는 친환경적이고 새로운 기술적 접근방식이 될 수 있다.

• 한국분무공학회지
• /
• 제21권2호
• /
• pp.104-110
• /
• 2016

Main purpose of the current paper is to show results of time lag analysis using phase information of flame transfer function in order to predict combustion instabilities in a gas turbine combustor. The flame transfer function (FTF) is modeled using a commercial Computational Fluid Dynamics (CFD) code (Fluent). Comparisons of the modeled flame shapes with the measured ones were made using the optimized heat transfer conditions and combustion models. The FTF modeling results show a quite good agreement with the measurement data in predicting the phase delay (i.e. time lag). Time lag analysis results using the phase of FTF shows better combustion instability prediction accuracy than using time lag calculated from the steady state flame length.

• 한국지하수토양환경학회지:지하수토양환경
• /
• 제15권1호
• /
• pp.9-18
• /
• 2010

In this study, Solid-phase micro-extraction (SPME) with Gas Chromatograph using Flame Ionization Detector (GC/FID) was studied as a possible alternative to liquid-liquid extraction for the analysis of Methyl tert-butyl ether (MTBE) and Tertiary-butyl ether (TBA) in water and an optimization condition of trace analysis of MTBE and TBA using the design of experiment (DOE) was described. The aim of our research was to apply experimental design methodology in the optimization condition of trace analysis of fuel oxygenated compounds in soil-phase microextraction with GC/FID. The reactions of SPME were mathematically described as a function of parameters of Temp ($X_1$), Volume ($X_2$), Time ($X_3$) and Salt ($X_4$) being modeled by the use of the partial factorial designs, which was used for fitting 2nd order response surface models and was alternative to central composite designs. The model predicted agreed with the experimentally observed result ($Y_1$(MTBE, $R^2$ = 0.96, $Y_2$ (TBA, $R^2$ = 0.98)). The estimated ridge of the expected maximum responses and optimal conditions for MTBE and TBA were 278.13 and (Temp ($X_1$) = $48.40^{\circ}C$, Volume ($X_2$) = 73.04 mL, Time ($X_3$) = 11.51 min and Salt ($X_4$) = 12,50 mg/L), and 127.89 and (Temp ($X_1$) = $52.12^{\circ}C$, Volume ($X_2$) = 88.88mL, Time ($X_3$) = 65.40 min and Salt ($X_4$) = 12,50 mg/L), respectively.

• 한국환경농학회지
• /
• 제35권3호
• /
• pp.211-215
• /
• 2016

BACKGROUND: The commercial biopesticides containing Chenopodium ambrosioides L. extracts which have been registered as one of the ingredients of the commercial biopesticide by the organic agriculture materials, and have been widely used in Republic of Korea. However, the quantitative analysis method of the active substances for the commercial biopesticides containing C. ambrosioides L. extract has not been conducted.METHODS AND RESULTS: To analyze the quantitative analysis of ascaridole, carvacrol, and p-cymene as active substances of C. ambrosioides L. extract, hydrophilic lipophilic balance cartridge was used for solid phase extraction. The active substances were analyzed by the gas chromatography with flame ionization detector. The limit of quantitation values of ascaridole, carvacrol, and p-cymene were 10, 5, and 2 mg/L, and the recovery rates were 96.3, 84.0, and 82.5% in liquid products and 98.3, 99.1, and 97.3% in solid products, respectively. The total content of ascaridole, carvacrol, and p-cymene in the commercial biopesticides was ranged from 0.08 to 12.75%.CONCLUSION: From these results, this method was suitable for the quantitative analysis of the active substances of commercial biopesticides containing C. ambrosioides L. extract.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2009년도 춘계학술대회 논문집
• /
• pp.233-236
• /
• 2009

산화제는 $LN_2O$, 고체연료는 HDPE(High Density PolyEthlene)를 사용하여 산화제의 상 및 연료포트 직경에 따른 하이브리드 로켓 모터의 연소특성을 비교 분석하였다. 불완전한 액적의 기화와 연료와 산화제의 혼합으로 인해 산화제로 $GN_2O$ 보다 $LN_2O$를 적용했을 때, 연소효율이 낮게 나타났다. O/F비에 따른 화염온도변화 및 끝 단면적에서의 연소반응으로 인해 $LN_2O$와 $GN_2O$를 사용하였을 경우 고체연료의 초기 포트 직경에 따른 후퇴율의 경향이 달리 나타났다.

• 농촌의학ㆍ지역보건
• /
• 제16권2호
• /
• pp.141-153
• /
• 1991

Free amino acid(FAA), free fatty acid(FFA), and amino acid obtained by hydrolysis of protein components of cystic fluid(CF) of Cysticercus cellulosae in pig and man were analyzed. FFA was analyzed by gas chromatography using Varian model 2700, and flame ionization detector with 6 feet${\times}$1/4inch glass column. Flow rate of $N_2$ was 30 ml/min, $H_2$ was 30 ml/min, air was 350 ml/min respectively and chart speed was 1 cm/min. Amino acid was analyzed by high performance liquid chromatography using Waters model 441, and fluorescence detector at 338nm/425nm with column of amino acid analyzer. Buffer A of mobile phase was pH 3.05 and pH of buffer B was 9.6 respectively. The results obtained were as follows : Seven FFAs containing 12~18 carbons were detected : Saturated fatty acids were lauric acid ($C_{12}$), myristic acid($C_{14}$), palmitic acid($C_{16}$), Stearic acid($C_{18}$). Unsaturated fatty acids were oleic acid($C_{12}^{=1}$), linoleic acid($C_{12}^{=2}$), and one unidentified fatty acid was detected. Generally much more quantity of FFA was determined in CF obtained from pig than that from man. FFA of the largest quantity was palmitic acid; 0.078 mg/ml. Eighteen FAAs were detected and the largest quantity was alanine. Ouantity of alanine was 386 ug/ml in CF from pig 108 ug/ml in CF from man respectively. while histidine in CF from pig was 273 ug/ml, that from man was only 4.3 ug/ml. Eighteen amino acids were identified by hydrolysis of protein in CF from man. But, histidine was not identified in CF from pig. Amino from pig and ug/ml from man.