• Journal of the Earthquake Engineering Society of Korea
• /
• v.22 no.7
• /
• pp.401-409
• /
• 2018

Performance-based seismic evaluation is usually done by considering simplified models for the liquid storage tanks therefore, it is important to validate those simplified models before conducting such evaluation. The purpose of this study is to compare the seismic response results of the FSI (fluid-structure interaction) model and the simplified models for the cylindrical liquid storage tanks and to verify the applicability of the simplified models for estimating failure probability. Seismic analyses were carried out for two types of storage tanks with different aspect ratios (H/D) of 0.45 and 0.86. FSI model represents detailed 3D fluid-structure interaction model and simplified models are modeled as cantilever mass-spring model, frame type mass-spring model and shell type mass-spring model, considering impulsive and convective components. Seismic analyses were performed with modal analysis followed by time history analysis. Analysis results from all the models were verified by comparing with the results calculated by the code and literature. The results from simplified models show good agreement with the ones from detailed FSI model and calculated results from code and literature, confirming that all three types of simplified models are very valid for conducting failure probability analysis of the cylindrical liquid storage tanks.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.19 no.2
• /
• pp.121-126
• /
• 1999

Manure management is a top priority on both dairy and swine farrns at present. This experiment was carried out to determine the effect of different types and N rates of liquid manure on forage yield and quality of oats(Avena sativa L.) in Suweon, 1997. Seven treatments consisting of chemical fertilizer $120kg\;N\;ha^{-1}$, liquid cattle manure 120, 240 and $360kg\;N\;ha^{-1}$, and liquid swine manure 120, 240 and $360kg\;N\;ha^{-1}$ were arranged in a randomized complete block design with three replications. As increasing N rate of the liquid manure, the plant height was increased, but dry matter content of oats was decreased as increasing liquid manure N rate. There were significant differences in dry matter yield of oats among the liquid manure N rates(P<0.05). Crude protein(CP) content of oats ranged from 14.7 to 24.1% (P<0.05), and CP yield was orderly ranked as liquid swine manure $360kg\;N\;ha^{-1}$>liquid cattle manure $360kg\;N\;ha^{-1}$>liquid swine manure $240kg\;N\;ha^{-1}$(P<0.05). Acid detergent fiber(ADF) content of the liquid cattle manure treatment showed a slightly higher than that of the liquid swine manure treatment(P<0.05). Neutral detergent fiber(NDF) content of the liquid cattle manure treatment was lower than that of the liquid swine manure treatment(P<0.05). Relative feed value(RFV) of the liquid cattle manure treatment decreased with increasing liquid manure N rates compared with that of the liquid swine manure treatment. Based on the results of this experiment, it is indicates that to increase the N rates from liquid manure application could be obtained from the increase of forage yield.

• Journal of Powder Materials
• /
• v.29 no.6
• /
• pp.459-467
• /
• 2022

Soft magnetic powder materials are used throughout industries such as motors and power converters. When manufacturing Fe-based soft magnetic composites, the size and shape of the soft magnetic powder and the microstructure in the powder are closely related to the magnetic properties. In this study, Fe-Si-Al-P alloy powders were manufactured using various manufacturing process parameter sets, and the process parameters of the vacuum induction melt gas atomization process were set as melt temperature, atomization gas pressure, and gas flow rate. Process variable data that records are converted into 6 types of data for each powder recovery section. Process variable data that recorded minute changes were converted into 6 types of data and used as input variables. As output variables, a total of 6 types were designated by measuring the particle size, flowability, apparent density, and sphericity of the manufactured powders according to the process variable conditions. The sensitivity of the input and output variables was analyzed through the Pearson correlation coefficient, and a total of 6 powder characteristics were analyzed by artificial neural network model. The prediction results were compared with the results through linear regression analysis and response surface methodology, respectively.

• Journal of the Korean Society of Visualization
• /
• v.9 no.2
• /
• pp.27-33
• /
• 2011

Supersonic liquid jet discharged from a nozzle has been investigated by using a ballistic range which is composed of high-pressure tube, pump tube, launch tube and liquid storage nozzle. High-speed Schlieren optical method was used to visualize the supersonic liquid jet flow field containing shock wave system, and spray droplet diameter was measured by the laser diffraction method. Experiment was performed with various types of nozzle to investigate the major characteristics of the supersonic liquid jet operating at the range of total pressure of 0.8 from 2.14 GPa. The results obtained shows that shock wave considerably affects the detailed atomization process of the liquid jet and as the nozzle diameter decreases, the shock wave angle and the averaged SMD of spray droplet tends to decrease.

• Proceedings of the KSME Conference
• /
• 2007.05b
• /
• pp.2967-2970
• /
• 2007

In a usual painting process, a liquid drop spreads on canvas by being dragged along a paintbrush. To obtain the fundamental understanding of the painting process from the mechanical point of view, we experimentally investigate various dynamic behavior of a liquid drop that spreads between moving solid plates. It is shown that three distinct types of drop spreading take place, i.e. shearing, spreading, and intact dragging, depending on the liquid viscosity and surface tension, the plate speed, and the wettability. We suggest a regime map based on the capillary number and the receding contact angle, which indicates the boundaries between different types of spreading behavior in a dimensionless space.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.1088-1092
• /
• 2017

In this study, a comparison of dynamic pressure data measured in hot-firing tests of liquid rocket engine gas generators with different types of dynamic pressure sensors is presented. The dynamic pressure sensors of different types and manufacturers have exhibited different dynamic pressure due to the influence of thermal shock. However, for the characteristic frequencies and RMS(root mean square) values which are important factors for the analysis of combustion instability, the differences between sensors have been found to be negligible.

• Coupled systems mechanics
• /
• v.12 no.2
• /
• pp.127-149
• /
• 2023

A theoretical method is developed to analyze the free vibration of an elastic annular plate in contact with an ideal liquid. The displacement potential functions of the contained liquid are expressed as a combination of the Bessel functions that satisfy the Laplace equation and the liquid boundary conditions. The compatibility condition along the interface between the annular plate and the contained liquid is taken into account to consider the fluid-structure coupling. The dynamic displacement of the wet annular plate is assumed to be a combination of dry eigenfunctions, allowing for prediction of the natural frequencies using the Rayleigh-Ritz method. The study investigates the effect of radial liquid boundary conditions on the natural frequencies of the wet annular plate, considering four types of liquid bounding: outer container bounded, outer and inner bounded, inner bounded, and radially unbounded. The proposed theoretical method is validated by comparing the predicted wet natural frequencies with those obtained from finite element analysis, showing excellent accuracy. The results indicate that the radial liquid bounding effect on the natural frequencies is negligible for the axisymmetric vibrational mode, but relatively significant for the mode with one nodal diameter (n =1) and no nodal circle (m' = 0). Furthermore, the study reveals that the wet natural frequencies are the largest for the plate with an inner bounded cylinder among the radial liquid boundary cases, regardless of the vibration mode.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.38 no.3
• /
• pp.209-217
• /
• 2012

One of the popular formulations is microemulsion in cosmetics. A kind of microemulsions is liquid crystal emulsion. Liquid crystal emulsion is used by wrapping functional ingredients. As the meaning of the name, Liquid crystals (LCs) are a state of matter that has properties between those of a conventional liquid and those of a solid crystal. There are various types of Liquid crystals (LCs) consisting of micelles or two layer structures of surfactants. Recently, microemulsion has been studied to improve its stability in thermodynamics of colloid science field. In this study, we prepared the microemulsion with PEG-8 Capryliccapric Glycerides and Polyglyceryl-3 Diisostearate. We studied the microemulsion with different oil types and different and cosurfactant content ratio. Also, the aim of this study is to develop a facial oil or a cleansing oil containing liquid crystal emulsion with functional ingredients.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.1577-1579
• /
• 2008

A mixture of two different types of polyimide, one having an alkyl side chain and ordinarily used for homeotropic alignment, and the other without a side chain and ordinarily used for planar alignment, is deposited and baked at high temperatures. When the resulting cell is filled with a nematic liquid crystal, it is found that the pretilt angle is a function of the baking temperature or mixing ratio, and can be controlled continuously over the range 0 to 90.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.759-763
• /
• 2005

This review presents the status of our research in liquid crystal display (LCD) photo-aligning. We present the basic mechanisms of the photo-induced order in various photo-aligning materials and in azo-dye layers in particular and show that photo-aligning methods can provide a controllable pretilt angle and anchoring energy of the liquid crystal cell, as well as its high thermo and UV stability. The photo-aligning of various types of liquid crystal displays is also discussed.