• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2003년도 International Meeting on Information Display
• /
• pp.585-588
• /
• 2003

We have studied how rubbing direction affects generation of disclination line in transmissive microdisplay for $90^{\circ}$ twisted nematic (TN) mode with pixel size of $22.2{\mu}m$. The rubbing direction of bottom substrate is changed from $0^{\circ}$ to $-135^{\circ}$ with a decrease step of $45^{\circ}$, and the results show that the generation regions of the disclination line are of a smallest size in $-135^{\circ}$ direction. The results were the same although the pixel size decreased. Consequently, the use of proper rubbing direction of liquid crystal can help overcome the problems of low aperture ratio and low contrast ratio in transmissive-type microdisplays. In addition, the pretilt angle of initial liquid crystal is found to make an important contribution to generation of the disclination line.

• Journal of Welding and Joining
• /
• 제15권4호
• /
• pp.136-142
• /
• 1997

In this study, the amorphous foil filler, thickness of 20 - $20~30\mu\textrm{m}$ was made to develop Cu-7.5wt%Mn-7.5wt%Si insert alloy(melting point temperature : solidus line 1003K, liquidus line 1070K). Liquid phase diffusion bonding of 304 stainless steels (STS304), is carried out successfully by using developed Cu-7.5Mn-7.5Si insert alloy. Bonding conditions are taken from bonding pressure of 5MPa, bonding temperatures from 1073K to 1423K varied within 50K and brazing holding times of 0, 30, 60 and 240 minutes. As the results, the tensile strength in the liquid phase diffusion bonding is a little bit lower than that in the solid phase diffusion bonding. The authors find out that the liquid phase diffusion bonding needs lower bonding pressure than the others. Therefore, the liquid phase diffusion bonding had an excellent brazability in which the bonding process showed the typical mechanism of diffusion bonding. In corresponding, the new developed insert alloy of low melting pointed Cu-7.5Mn-7.5Si makes possible brazing between the STS304.

• Korean Chemical Engineering Research
• /
• 제48권5호
• /
• pp.632-637
• /
• 2010

1기압 298.15 K에서 water + tetrahydrofuran + butyl acetate + isoamyl alcohol를 포함한 4성분 액-액추출계의 상평형에 대하여 연구하였다. Butyl acetate + isoamyl alcohol을 혼합용매로 사용하였으며, 수용액으로부터 tetrahydrofuran를 추출함에 있어서 혼합용매 사용의 효과를 고찰하기 위하여 각 4성분계에 대한 용해도 곡선, 대응선(Tie-line), 분배도, 선택도를 측정하였다. 또한 실험에 의한 대응선(Tie-line) 데이터를 UNIFAC 모델식으로부터 예측된 값들과 비교한 결과, 액-액평형에 대한 UNIFAC 모델이 본 실험에 설정된 4성분계에 대하여 혼합용매 비율 75/25, 50/50, 25/75에 따라 3.35, 5.21, 5.65%의 편차가 나타남을 알 수 있었다.

• 한국분무공학회지
• /
• 제11권4호
• /
• pp.205-211
• /
• 2006

Impinging angle, impinging distance, length eve. diameter and injection pressure of a triplet injector were tested to evaluate the spray characteristics injected by liquid/gas combinations. Two different kinds of unlike triplet sprays were produced by changing the gas and liquid feed lines. One was the G-L-G(Gas-Liquid-Gas) type, and the other was L-G-L(Liquid-Gas-Liquid) type. Spray angles were wider with the G-L-G type than with L-G-L type. Mass distributions in spray were obtained with a, mechanical patternator. Mass distributions were not circular but elliptical distributions. When the range of mechanical patternator to injector decreased, mass distributions were more concentrated in the center region.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2017년도 제48회 춘계학술대회논문집
• /
• pp.1057-1059
• /
• 2017

액체로켓엔진 개발에서 엔진 짐벌링 시 산화제라인의 벨로우즈 극저온 단열 방법을 연구하였다. 극저온 산화제의 열단열과 엔진구성품의 고온으로부터의 열차폐는 엔진 추진성능과 효율에 중요하다. 엔진 짐벌링중 고압배관과 재순환라인(예냉라인)이 단열부위로 기존의 극저온 단열과는 차별화된 디자인과 소재가 필요하다. 엔진 짐벌링중에 벨로우즈의 극저온 단열재가 열단열과 열복사를 고려하여 새로운 디자인으로 마찰력과 작동반경을 고려하여 PTFE소재의 단열재가 적용된다. 향후 엔진 시험을 통하여(짐벌링과 TVC) 새로운 벨로우즈 단열재가 향상되고 디자인 변경이 요구된다.

• 한국환경과학회지
• /
• 제24권12호
• /
• pp.1569-1582
• /
• 2015

The analytical method for 16 organophosphorus pesticides was developed in this study. The 16 organophosphorus pesticides were analyzed by liquid chromatography-tandem mass spectrometry (LC/MS/MS) using on-line solid phase extraction (on-line SPE) with PLRP- S cartridge. Analysis of all analytes in the MS/MS was processed in the electrospray ioni-zation (ESI) positive mode. They are Azinphos ethyl, Chlorfenvinphos, Ethion, Famphur, Phosmet, Phosphamidon, Terbufos, Aspon, Chlorpyrifos-methyl, Crotoxyphos, Dichlofenthi-on, Dicrotophos, Fonofos, Thionazin, Dimethoate and Iprobenfos. Limits of detection (LODs) and Limits of quantification(LOQs) were obtained as 0.8~2.0 ng/L and 2.6~6.4 ng/L, respectively. All compounds were not detected at the 8 sampling points of the raw water and clean water.

• 한국가시화정보학회지
• /
• 제11권1호
• /
• pp.48-52
• /
• 2013

This paper presents experimental observation of asymmetric electrohydrodynamic flow generated around a pair of symmetric coplanar electrodes. Electrodes are attached on the bottom of the cavity containing a dielectric liquid, i.e., a mixture of dodecane and 0.5% wt Span80. In the first experiment, an AC voltage of 1500 V is applied with the frequency varying in the range 10~500 hz and the left electrode being grounded. The flow patterns show that the center line of vortices is unexpectedly tilted to the left side. If the right side electrode is grounded, the center line is tilted to the right side. The magnitude of the fluid velocity shows an irregular variation with the frequency in the range 10 Hz~100 Hz, beyond which it simply decays. In the second experiment, we applied fixed AC with 1000 V and 60 Hz superposed by DC voltage varying in the range -1000 V ~ +1000 V. The center line of the flow pattern is tilted to the right side with positive DC voltage and to the left side with negative DC. We have managed to show that the flow pattern can be symmetric with a suitable combination of DC and AC, e.g., DC 850 V plus AC 1000 V with the frequency 10 Hz.

• 한국추진공학회지
• /
• 제11권2호
• /
• pp.9-17
• /
• 2007

기체공급계 추진제공급시스템의 재순환배관에 대하여 성능시험을 수행하였다. 극저온 추진제로 액체 산소를 사용하고 재순환촉진용 분사가스로는 헬륨을 사용하여 탱크 얼리지가 대기압 상태인 경우와 4 bars로 가압된 경우에 대하여 시험하였다. 자연재순환의 발생여부와 헬륨분사량에 따른 액체산소의 재순환량 변화 및 배관 내부 온도분포를 파악하였고, 주어진 규격의 배관시스템에 대한 적정 헬륨분사량과 터보펌프 전단의 추진제 온도상승 정도를 살펴보았다. 시험데이터를 이용하여 재순환배관의 성능계산을 위한 프로그램을 작성하고 시험과 계산결과를 비교하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2130-2135
• /
• 2007

Operating characteristics of a loop heat pipe (LHP) having a bypass line was investigated experimentally. The LHP had a sintered metal wick as a capillary structure and methanol as a working fluid. The sintered metal wick was made of stainless steel of which the average pore size was 5 ${\mu}m$and porosity of 47%. A bypass line of a small diameter was attached between the vapor escape passage and the liquid reservoir. The dimension of the flat evaporator was $50(L){\times}40(W){\times}30(H)$ mm and that of the condenser was $50(L){\times}40(W){\times}11(H)$ mm. Wall and pipe material of the LHP was stainless steel and heating area was 35(W) mm${\times}$35(L) mm. The inner diameters of vapor and liquid transport lines were 4.0 mm and 2.0 mm, and the lengths of the two lines were both 0.5 m. The LHP was tested for three different tilt angles of horizontal, favorite tilt, and adverse tilt. The thermal load range was up to 290 W at the condenser above evaporation position. Furthermore, the effect of a bypass line on the start-up transient as well as steady-state operation was presented and discussed.

• 공업화학
• /
• 제8권4호
• /
• pp.653-659
• /
• 1997

에너지 비용의 상승에 따라 추출의 기본원리를 둔 새로운 분리공정에 대한 연구가 많이 진행되고 있으며, 이에 따라 액-액평형 조성의 계산 및 예측에 대한 필요성이 매우 증가하고 있다. 본 연구에서는 공비혼합물을 형성하는 2-propanol 수용액에 용매로서 methyl ethyl ketone, methyl isobutyl ketone, ethylacetate, butylacetate, toluene 및 o-xylene을 첨가한 삼성분계에 대하여 $25^{\circ}C$에서 용해도곡선, tie line, plait point, 분배계수와 선택도를 실험을 통해 구하였다. Tie line 데이터의열역학적 건전성을 확인하였으며 실험값을 NRTL 및 UNIQUAC 모델식으로 구한 계산값과 비교하였다.