• 대기
• /
• 제23권4호
• /
• pp.453-470
• /
• 2013

As a part of the KIAPS Observation Processing System (KOPS), we have developed the modules of satellite radiance data pre-processing and quality control, which include observation operators to interpolate model state variables into radiances in observation space. AMSU-A (Advanced Microwave Sounding Unit-A) level-1d radiance data have been extracted using the BUFR (Binary Universal Form for the Representation of meteorological data) decoder and a first guess has been calculated with RTTOV (Radiative Transfer for TIROS Operational Vertical Sounder) version 10.2. For initial quality checks, the pixels contaminated by large amounts of cloud liquid water, heavy precipitation, and sea ice have been removed. Channels for assimilation, rejection, or monitoring have been respectively selected for different surface types since the errors from the skin temperature are caused by inaccurate surface emissivity. Correcting the bias caused by errors in the instruments and radiative transfer model is crucial in radiance data pre-processing. We have developed bias correction modules in two steps based on 30-day innovation statistics (observed radiance minus background; O-B). The scan bias correction has been calculated individually for each channel, satellite, and scan position. Then a multiple linear regression of the scan-bias-corrected innovations with several predictors has been employed to correct the airmass bias.

• 식물조직배양학회지
• /
• 제21권2호
• /
• pp.117-121
• /
• 1994

쇠비름(portuaaca oleracea L.)의 줄기절편체로부터 캘러스유도를 위한 적정배지는 BAP 0.1 + 2,4-D 1.0 mg/L., 30g/L sucrose 및 10 g/L agar를 첨가한 MS배지로 나타났으며, 액체배양에 의한 세포의 증식에는 BAP 0.1 + 2,4-D 0.5mg/L가 함유된 MS배지가 효과적이었다. 장시간 건조처리는 세포는 활력과 재생 및 재분화율이 강하게 억제되나, 1시간 및 2시간동안의 단시간 건조처리한 세포의 재분화율은 각각 83및 80%로 나타나나 무처리 61%에 비해 높았다. 0.6% NaCl의 2일간 전처리는 세포의 재분화율에는 영향을 미치지 않으나, 세포활력 및 재생률에는 억제작용을 나타내었다. Sucrose 70및 100 g/L를 전처리한 쇠비름세포의 재분화율은 각각 80및 81%로 무처리에 비해 높았다.

• 한국축산식품학회지
• /
• 제36권4호
• /
• pp.516-522
• /
• 2016

Goat milk is highly nutritious and is consumed in many countries, but the development of functional foods from goat milk has been slow compared to that for other types of milk. The aim of this study was to develop a goat milk protein hydrolysate (GMPH) with enhanced digestibility and better hypoallergenic properties in comparison with other protein sources such as ovalbumin and soy protein. Goat milk protein was digested with four commercial food-grade proteases (separately) under various conditions to achieve the best hydrolysis of α_s -casein and β-lactoglobulin. It was shown that treatment with alcalase (0.4%, 60℃ for 30 min) effectively degraded these two proteins, as determined by SDS-PAGE, measurement of nonprotein nitrogen content, and reverse-phase high-performance liquid chromatography. Hydrolysis with alcalase resulted in a significant decrease in β-lactoglobulin concentration (almost to nil) and a ~40% reduction in the level of α_s-casein. Quantification of histamine and TNF-α released from HMC-1 cells (human mast cell line) showed that the GMPH did not induce an allergic response when compared to the control. Hence, the GMPH may be useful for development of novel foods for infants, the elderly, and convalescent patients, to replace cow milk.

• 한국환경농학회지
• /
• 제23권1호
• /
• pp.22-27
• /
• 2004

제지공장의 슬러지를 활성오니슬러지와 집수조슬러지로 나누어 C/N율, 메탄발효폐액 첨가 그리고 몇몇 첨가제를 처리하고 발생한 혐기발효가스 중 메탄함량을 측정하여 각각의 처리효과를 조사해 보았다. 1. 활성오니 제지슬러지를 이용한 메탄발효의 최적 C/N율은 60으로 이전의 다른 재료들과는 다른 경향이었다. 2. 혐기발효 폐액의 첨가로 메탄함량 40% 도달 시간은 약 2일정도 앞당겼지만, 10일간의 총 메탄발생량은 1/8 수준으로 적었다. 3. 첨가제중 sodium sulfide와 ethylacetate의 처리효과는 발효폐액 첨가구에서 뚜렷하였고, 무첨가구에서도 sodium sulfide는 1.3배의 메탄생성 증가에 기여하였다. 4. 황화수소가 제거된 제지슬러지에서는 메탄이 전혀 생성되지 않았고, sodium sulfide가 첨가된 처리구에서는 메탄생성이 증가되었기에 제지슬러지 메탄발효에서 황은 필수적이라고 할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.361-362
• /
• 2006

This paper presents the robust design of gripper part for a high-speed LCD (Liquid Crystal Display) transfer system. In this paper, the 1st DOE (Design of Experiment) is conducted to find out main-effect factors fur the design of gripper part. Thirty-six experiments are performed using $ANSYS^{(R)}$ and their results are statistically analyzed using $MINITAB^{(R)}$, which shows that the factors, i.e., First-width, Second-width, Rec-width, and thickness of gripper part, are more important than other factors. The main effect plots shows that the maximum deflection and mass of gripper part are minimized by increasing First-width, Second-width, Rec-width and thickness. The 2nd DOE is conducted to obtain RSM (Response Surface Method) equation. The CCD (Central Composite Design) technique with four factors is used. Optimum design is conducted using the RSM equation. Genetic algorithm is used for optimal design. Six sigma robust design is conducted to find out a guideline for control range of design parameter. To obtain six sigma level reliability, the standard deviations of design parameters are shown to be controlled within 5% of average design value.

• 한국분무공학회지
• /
• 제25권1호
• /
• pp.8-14
• /
• 2020

Recently, 1-D model-based engine development using virtual engine system is getting more attention than experimental-based engine development due to the advantages in time and cost. Injection rate profile is the one of the main parameters that determine the start and end of combustion. Therefore, it is essential to set up a sophisticated model to accurately predict the injection rate as starting point of virtual engine system. In this research, procedure of 1-D model setup based on AMESim is introduced to predict the dynamic behavior and injection rate of diesel injector. As a first step, detailed 3D cross-sectional drawing of the injector was achieved, which can be done with help of precision measurement system. Then an approximate AMESim model was provided based on the 3D drawing, which is composed of three part such as solenoid part, control chamber part and needle and nozzle orifice part. However, validation results in terms of total injection quantity showed some errors over the acceptable level. Therefore, experimental work including needle movement visualization, solenoid part analysis and flow characteristics of injector part was performed together to provide more accuracy of 1-D model. Finally, 1-D model with the accuracy of less than 10% of error compared with experimental result in terms of injection quantity and injection rate shape under normal temperature and single injection condition was established. Further work considering fuel temperature and multiple injection will be performed.

• Journal of Ginseng Research
• /
• 제40권4호
• /
• pp.344-350
• /
• 2016

Background: Mountain-cultivated ginseng (MCG) and cultivated ginseng (CG) both belong to Panax ginseng and have similar ingredients. However, their pharmacological activities are different due to their significantly different growth environments. Methods: An ultra-performance liquid chromatography/quadrupole time-of-flight mass spectrometry (UPLC-QTOF-MS/MS)-based approach was developed to distinguish MCG and CG. Multivariate statistical methods, such as principal component analysis and supervised orthogonal partial-least-squares discrimination analysis were used to select the influential components. Results: Under optimized UPLC-QTOF-MS/MS conditions, 40 ginsenosides in both MCG and CG were unambiguously identified and tentatively assigned. The results showed that the characteristic components of CG and MCG included ginsenoside Ra3/isomer, gypenoside XVII, quinquenoside R1, ginsenoside Ra7, notoginsenoside Fe, ginsenoside Ra2, ginsenoside Rs6/Rs7, malonyl ginsenoside Rc, malonyl ginsenoside Rb1, malonyl ginsenoside Rb2, palmitoleic acid, and ethyl linoleate. The malony ginsenosides are abundant in CG, but higher levels of the minor ginsenosides were detected in MCG. Conclusion: This is the first time that the differences between CG and MCG have been observed systematically at the chemical level. Our results suggested that using the identified characteristic components as chemical markers to identify different ginseng products is effective and viable.

• 생명과학회지
• /
• 제25권7호
• /
• pp.780-785
• /
• 2015

전복을 4일간 굶긴 후 phlorotannin-고함유 곰피를 제공하여 이의 섭취 및 phlorotannin 축적정도를 조사하였다. 전복의 성장속도는 곰피 혹은 일반 사료로 쓰이는 다시마를 20일간 투여한 경우 서로 비슷하였다. 주된 phlorotannin 성분인 7-phloroeckol 및 eckol은 역상 HPLC로서 측정하였다. 7-phloroeckolol은 섭취 6일만에 전복 건조육 1g당 0.58±0.13 mg 정도 축적되었다. Eckol은 6일만에 전복 건조육 1g당 0.25±0.05 mg 정도 축적되었으며 실험기간 내 그 정도를 유지하였다. 대조군로서의 다시마 투여 전복은 phlorotannin을 전혀 함유하지 않았다. Phlorotannin은 전복 조직내에서의 구성효소들에 의하여 분해되어 지는것으로 보인다. 그러므로 다양한 생리활성을 지닌 phlorotannin 물질들을 가진 고부가 가치의 전복 생산은 전복수확 6일전부터 간단히 사료만 phlorotannin-고함유 곰피로 바꾸어 공급함으로서 생산가능하다.

• 생물정신의학
• /
• 제3권1호
• /
• pp.51-56
• /
• 1996

The effects of 3 week treatment with haloperidol(2mg/kg/day, i.p.) on dopamine(DA) D2 receptor and DA metabolism in rat striata were studied at various time points after withdrawal from the drug treatment. Striatal DA D2 receptors were characterized with the radioligand 0.5nM [$^3H$]Spiperone. Dopamine(DA), homovanillic acid(HVA), 3,4-dihydroxyphenyl acetic acid(DOPAC) in rat striatum were measured with the high performance liquid chromatography. Drug withdrawal for 1 week induced significant increase in the number of D2 receptor in striatum after withdrawal for 1 week(p<0.05), and then this change was restored to control level during the withdrawal time of 2 and 4 weeks. There was no difference in striatal concentrations of DA and its metabolites among the groups. In conclusion, one-week withdrawal from chronic haloperidol treatment induced DA D2 receptor supersensitivity in the striatum, and that was normalized rapidly. Though this adaptive change in DA receptors, it may not affect the metabolism of DA in striatum.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.429-433
• /
• 2004

게임과 영화는 현재 엔터테인먼트 산업에서 가장 각광을 받고 있는 분야이며, 이러한 분야에서는 입자 시스템을 이용하여 불꽃, 폭발, 연기, 액체, 눈, 비, 먼지와 같은 특수효과를 만들어 낸다. 게임 및 가상현실에서 상위 수준의 그래픽 라이브러리인 입자 시스템 API를 사용하면 위와 같은 특수효과를 사실적으로 표현할 수 있게 한다. 입자 시스템 API를 적용 시 개발자가 원하는 형태의 특수효과가 구현될 때까지 파라미터 값을 계속 바꿔가며 소스코드를 컴파일하여야 하며, 각 파라미터들 간의 연관성 있는 세밀한 조정이 이루어지기까지 많은 시간이 필요하다는 단점을 가지고 있다. 이에, 본 논문에서는 온라인 게임 및 실시간 가상현실에 실제 적용할 수 있는 입자 시스템 API를 개발하고 위치, 속도, 색상, 투명도, 크기, 수명, 2차 위치, 2차 속도 둥의 속성 조절을 통해 손쉽게 특수효과를 생성할 수 있는 입자 시스템 에디터를 개발하고자 한다.