• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1995년도 춘계학술대회 논문집
• /
• pp.66-72
• /
• 1995

Microstructural features of laser irradiated bulk target which consists of GeSbTe interrmertallic compounds were examined by analytical microscopy. It was found that in addition to vaporization, a liquid expulsion due to laer-material interatction is main contribution of materials removal in the sintered GaSbTe targets, The morphological change is qualitatively discussed in the present article.

• 한국전기전자재료학회논문지
• /
• 제13권12호
• /
• pp.1045-1050
• /
• 2000

Perdeuterated hexaflouroacetylacetonato-ytterbium [Yb(HFA-D)$_3$]complexes were synthesized by the keto-enol tautomerism reaction of Yb(HFA-H$_3$) in methanol-d$_4$in rder to reduct the radiationless transition to the ligands. The luminescence properties of Yb(HFA-D)$_3$complex were measured in the following anhydrous deuterated organic solvents ; Methanol-d$_4$, THF-d$_{8}$, PO(O$CH_3$)$_3$and DMSO-d$_{6}$. The intensity, lifetime and quantum efficiency of the luminescnce in DMSO-d$_{6}$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-d$_{6}$ might be the most appropriate solvent for the liquid laser material of Yb(HFA-D)$_3$complex.complex.

• 대한기계학회논문집B
• /
• 제25권11호
• /
• pp.1483-1491
• /
• 2001

Enhancement of pulsed-laser ablation by an artificially deposited liquid film is presented. Measurements of ablation rate, ablation threshold, and surface topography arc performed. Correlation between material ablation and photoacoustic effect is examined by the optical beam deflection method. The dependence of ablation rate on liquid-film thickness and chemical composition is also examined. The results indicate that photomechanical effect in the phase explosion of liquid is responsible for the enhanced ablation. The low critical temperature of liquid induces explosive vaporization with localized photoacoustic excitation in the superheat limit and increases the ablation efficiency. Experiments were carried out utilizing a Q-swiched Nd:YAG laser at near-threshold laser fluences with negligible plasma effect (up to ∼100 MW/cm$^2$).

• 한국분말재료학회지
• /
• 제27권3호
• /
• pp.210-218
• /
• 2020

A T-800 (Co-Mo-Cr) coating material is fabricated using Co-Mo-Cr powder feedstock and laser cladding. The microstructure and melted Al erosion properties of the laser-cladded T-800 coating material are investigated. The Al erosion properties of the HVOF-sprayed MoB-CoCr and bulk T-800 material are also examined and compared with the laser-cladded T-800 coating material. Co and lave phases (Co₂MoCr and Co₃Mo₂Si) are detected in both the laser-cladded T-800 coating and the bulk T-800 materials. However, the sizes of the lave phases are measured as 7.9 ㎛ and 60.6 ㎛ for the laser-cladded and bulk T-800 materials, respectively. After the Al erosion tests, the erosion layer thicknesses of the three materials are measured as 91.50 ㎛ (HVOF MoB-CoCr coating), 204.83 ㎛ (laser cladded T-800), and 226.33 ㎛ (bulk T-800). In the HVOF MoB-CoCr coating material, coarse cracks and delamination of the coating layer are observed. On the other hand, no cracks or local delamination of the coating layer are detected in the laser T-800 material even after the Al erosion test. Based on the above results, the authors discuss the appropriate material and process that could replace conventional bulk T-800 materials used as molten Al pots.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.15-18
• /
• 2001

Perdeuterated hexaflouroacetylacetonato-ytterbium [Yb(SOL)-D)$_3$] complexes were synthesized by the keto-enol tautomerism reaction of Yb(SOL-H)$_3$ in methanol-d$_4$in methanol-d$_4$in order to reduce the radiationless transition to the ligands. The luminescence properties of Yb(SOL-D)$_3$complex were measured in the following anhydrous deuterated organic solvents ; Methanol-d$_4$, THF-d$\sub$8/, PO(OCH$_3$)$_3$ and DMSO-d$\sub$6/. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-d$\sub$6/ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-d$\sub$6/ might be the most appropriate solvent for the liquid laser material of Yb(SOL-D)$_3$ complex.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.640-643
• /
• 2001

Perdeuterated hexaflouroacetylacetonato-ytterbium [Yb(SOL-D)$_3$] complexes were synthesized by the keto-enol tautomerism reaction of Yb(SOL-H)$_3$in methanol-d$_4$in order to reduce the radiationless transition to the ligands. The luminescence properties of Yb(SOL-D)$_3$complex were measured in the following anhydrous deuterated organic solvents ; Methanol-d$_4$, THF-d$_{8}$, PO(O$CH_3$)$_3$and DMSO-d$_{6}$. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-d$_{6}$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-d$_{6}$ might be the most appropriate solvent for the liquid laser material of Yb(SOL-D)$_3$complex.complex.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 추계학술대회 논문집
• /
• pp.129-132
• /
• 2000

Perdeuterated hexafluoroacetylacetonato -ytterbium [$Yb (HFA -D)$_3$_3$] complexes were synthesized by the koto-enol tautomerism reaction of $Yb(HFA-H)_3$ in methanol-$d_4$, in order to reduce the radiationless transition to the ligands. The luminescence properties of $Yb(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents : Acetone-$d_6$, Methanol-$d_4$, THF-$d_8$, $PO(OC$H_3$)_3$ and DMSO-$d_6$. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-$d_6$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-d$_{6}$ might be the most appropriate solvent for the liquid laser material of $Yb(HFA-D)_3$ complex.x.

• 한국결정성장학회지
• /
• 제22권3호
• /
• pp.134-138
• /
• 2012

Recently the preparation magnetic nanoparticles by a pulsed laser ablation in liquid has gained much attention because it is easy to control experimental parameters. Iron oxide magnetic nanoparticles have been prepared by a pulsed laser ablation of ${\alpha}-Fe_2O_3$ target in ethanol at different magnitude of laser energy of 1, 20, 40 and 80 mJ/pulse. It revealed that particle size increases with increasing laser energy. It could be concluded that 40 mJ/pulse is an optimum laser energy for the preparation of iron oxide nanoparticles with uniform size distribution. The nanoparticles are homogeneously dispersed in ethanol and their stability maintained for several months.

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2000년도 추계학술대회논문집
• /
• pp.129-132
• /
• 2000

Perdeuterated hexaflouroacetyIacetonato-ytterbium $[Yb(HFA-D)_3]$ complexes were synthesized by the keto-en01 tautomerism reaction of $Yb(HFA-D)_3$ in methanol-$d_4$ in order to reduce the radiationless transition to the ligands. The luminescence properties of $Yb(HFA-D)_3$ complex were measured in the following anhydrous deuterated organic solvents ; Acetone-$d_6$, Methanol -$d_4$, THF-$d_6$, PO$(OHC_3)_3$ and DMSO-$d_6$. The intensity, lifetime and quantum efficiency of the luminescence in DMSO-$d_6$ were superior to those in other deuterated solvents. It was suggested that the anhydrous DMSO-$d_6$ might be the most appropriate solvent for the liquid laser material of $Yb(HFA-D)_3$ complex.

• 한국레이저가공학회지
• /
• 제4권2호
• /
• pp.13-19
• /
• 2001

When a high-power laser beam is irradiated on the surface of material, it is well known that a cavity, called a keyhole induced by the pressure action of the vapor plume, is generated in the molten material. This paper describes the interaction between a pulsed CO$_2$ laser beam and water. The laser-beam is used to generate and maintain a conical depression in the water surface similar to the keyhole created during laser penetration welding. Experimental results show that the depth of laser-beam penetration is limited by hydrodynamic instability. The instability of the surface cavity can be understood by the capillary instability of a hollow jet. Theoretical computation of the steady keyhole shape has been performed. modifying the model suggested by Andrews et al. (1976). The model predicts the qualitative behavior of the keyhole but significantly underestimates the average diameter.