• Wind and Structures
• /
• v.38 no.1
• /
• pp.15-42
• /
• 2024

A flexible-base coupled-two-beam (CTB) discrete model with equivalent tuned mass dampers is used to assess the effect of soil-structure interaction (SSI) and different types of lateral resisting systems on the design of passive dynamic absorbers (PDAs) under the action of along-wind and across-wind loads due to vortex shedding. A total of five different PDAs are considered in this study: (1) tuned mass damper (TMD), (2) circular tuned sloshing damper (C-TSD), (3) rectangular tuned sloshing damper (R-TSD), (4) two-way liquid damper (TWLD) and (5) pendulum tuned mass damper (PTMD). By modifying the non-dimensional lateral stiffness ratio, the CTB model can consider lateral deformations varying from those of a flexural cantilever beam to those of a shear cantilever beam. The Monte Carlo simulation method was used to generate along-wind and across-wind loads correlated along the height of a real shear wall-frame building, which has similar fundamental periods of vibration and different modes of lateral deformation in the xz and yz planes, respectively. Ambient vibration tests were conducted on the building to identify its real lateral behavior and thus choose the most suitable parameters for the CTB model. Both alongwind and across-wind responses of the 144-meter-tall building were computed considering four soil types (hard rock, dense soil, stiff soil and soft soil) and a single PDA on its top, that is, 96 time-history analyses were carried out to assess the effect of SSI and lateral resisting system on the PDAs design. Based on the parametric analyses, the response significantly increases as the soil flexibility increases for both type of lateral wind loads, particularly for flexural-type deformations. The results show a great effectiveness of PDAs in controlling across-wind peak displacements and both along-wind and across-wind RMS accelerations, on the contrary, PDAs were ineffective in controlling along-wind peak displacements on all soil types and different kind of lateral deformation. Generally speaking, the maximum possible value of the PDA mass efficiency index increases as the soil flexibility increases, on the contrary, it decreases as the non-dimensional lateral stiffness ratio of the building increases; therefore, there is a significant increase of the vibration control effectiveness of PDAs for lateral flexural-type deformations on soft soils.

• The Korean Journal of Pesticide Science
• /
• v.13 no.3
• /
• pp.190-196
• /
• 2009

The residues of abamectin 1.8% EC, resisted for control of pine wood nematode, Bursaphelenchus xylophilus in pine tree were surveyed in tissue of Pinus thunbergii and P. koraiensis after injection of a liquid formulation. Limits of detection of abamectin in tissue of P. thunbergii were $0.05\;mg\;kg^{-1}$ and mean recoveries at $0.5\;mg\;kg^{-1}$ trunk injection were 90.9% and 93.1% respectively in stem and trunk of P. thunbergii. Abamectin 1.8% EC, trunk injected in 15 m height P. thunbergii were detected in all stem (edible part of carrier insect of pine wood nematode, Monochamus alternatus) from 0.29 to $0.73\;mg\;kg^{-1}$ after 150 days injection. Amount of residue of abamectin 1.8% EC in 12.6 cm mean breast height diameter (DBH) P. thunbergii were variable depending on individual trees in natural forest. Amount of residues in lower and middle part of trunk were reduced with the passage of the injection time. In upper part of trunk were detected $1.84\;mg\;kg^{-1}$ on 30 days after injection however $0.65\;mg\;kg^{-1}$ on 15 days after injection and under detection limit on 100 and 180 days after injection in P. thunbergii. Bottom and middle parts of crown were detected $0.183\;mg\;kg^{-1}$ and $0.173\;mg\;kg^{-1}$ respectively on 180 days after injection in P. thunbergii. Mean residues of abamectin in crown and trunk were $0.80\;mg\;kg^{-1}$ and $0.30\;mg\;kg^{-1}$ on 170 days after trunk injection in 20 cm DBH and 9 m height P. koraiensis. Mean residues of abamectin in crown and trunk were $0.67\;mg\;kg^{-1}$ and $0.36\;mg\;kg^{-1}$ on 170 days after trunk injection in 15 cm DBH and 6 m height P. koraiensis.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.22 no.1
• /
• pp.53-66
• /
• 1980

The research work is concerned with the analytical and experimental studies on the heat transfer phenomenon around the underground concrete digester used for biogas production Systems. A mathematical and computational method was developed to estimate heat losses from underground cylindrical concrete digester used for biogas production systems. To test its feasibility and to evaluate thermal parameters of materials related, the method was applied to six physical model digesters. The cylindrical concrete digester was taken as a physical model, to which the model,atical model of heat balance can be applied. The mathematical model was transformed by means of finite element method and used to analyze temperature distribution with respect to several boundary conditions and design parameters. The design parameters of experimental digesters were selected as; three different sizes 40cm by 80cm, 80cm by 160cm and l00cm by 200cm in diameter and height; two different levels of insulation materials-plain concrete and vermiculite mixing in concrete; and two different types of installation-underground and half-exposed. In order to carry out a particular aim of this study, the liquid within the digester was substituted by water, and its temperature was controlled in five levels-35。 C, 30。 C, 25。 C, 20。C and 15。C; and the ambient air temperature and ground temperature were checked out of the system under natural winter climate conditions. The following results were drawn from the study. 1.The analytical method, by which the estimated values of temperature distribution around a cylindrical digester were obtained, was able to be generally accepted from the comparison of the estimated values with the measured. However, the difference between the estimated and measured temperature had a trend to be considerably increased when the ambient temperature was relatively low. This was mainly related variations of input parameters including the thermal conductivity of soil, applied to the numerical analysis. Consequently, the improvement of these input data for the simulated operation of the numerical analysis is expected as an approach to obtain better refined estimation. 2.The difference between estimated and measured heat losses was shown to have the similar trend to that of temperature distribution discussed above. 3.It was found that a map of isothermal lines drawn from the estimated temperature distribution was very useful for a general observation of the direction and rate of heat transfer within the boundary. From this analysis, it was interpreted that most of heat losses is passed through the triangular section bounded within 45 degrees toward the wall at the bottom edge of the digesten Therefore, any effective insulation should be considered within this region. 4.It was verified by experiment that heat loss per unit volume of liquid was reduced as the size of the digester became larger For instance, at the liquid temperature of 35˚ C, the heat loss per unit volume from the 0. 1m$^3$ digester was 1, 050 Kcal/hr m$^3$, while at for 1. 57m$^3$ digester was 150 Kcal/hr m$^3$. 5.In the light of insulation, the vermiculite concrete was consistently shown to be superior to the plain concrete. At the liquid temperature ranging from 15。 C to 350 C, the reduction of heat loss was ranged from 5% to 25% for the half-exposed digester, while from 10% to 28% for the fully underground digester. 6.In the comparison of heat loss between the half-exposed and underground digesters, the heat loss from the former was fr6m 1,6 to 2, 6 times as much as that from the latter. This leads to the evidence that the underground digester takes advantage of heat conservation during winter.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.6-11
• /
• 2009

The electro-optical characteristics of the Liquid Crystal on Silicon (hereinafter "LCOS") micro-display on vertically alignment (VA) mode were studied with 3-dimensional LC code. 5 different cell gaps, such as 1.4 ${\mu}m$, 1.8 ${\mu}m$, 2.1 ${\mu}m$, 2.4 ${\mu}m$ and 2.8 ${\mu}m$, were selected. The reflectance-voltage (R-V) characteristics, distribution of reflected light, reflectance, optical fill factor and contrast ratio were calculated and investigated depending on various cell gaps. Due to the surface anchoring effect, higher cell gap showed higher reflectance. However, considering the optical fill factor and contrast ratio, middle-height 2.1 ${\mu}m$ showed the best electro-optical characteristic. 0.7 inch Full-HD LCOS panels having same geometry and material property were fabricated. The reflected light intensity and contrast ratio were measured and the measured results were well-matched to the calculated results.

• Plant Journal
• /
• v.15 no.4
• /
• pp.36-42
• /
• 2019

In recent, according to the tightening of environment regulation policy, the height of the site of the power plant is increased and the length of the cooling water pipe is increased. This has a serious impact on the stability of the plant. This study analyzes the transient phenomenon using LIQT 7.2, an unsteady state one-dimensional analysis software, to secure the stability of 1,000 MW high-capacity coal-fired power plant cooling water system with high head. To prevent water hammer, The effects on performance characteristics were predicted by individual and combination application. The surge pressure of the cooling water which occurs when the pump was stopped without installing the anti-surge devices was the largest at the pump outlet side. The most effective and simple way to reduce surge pressure in these cooling water systems is to combine a vacuum breaker with a hydraulic non-return valve, which is an essential device for pump protection.

• Structural Engineering and Mechanics
• /
• v.66 no.5
• /
• pp.583-594
• /
• 2018

A theoretical formulation based on the linearized potential theory, the Descartes' rule and the extremum optimization method is presented to calculate the critical distance of lifting points of the fully balanced hoist vertical ship lift, and to study pitching stability of the ship lift. The overturning torque of the ship chamber is proposed based on the Housner theory. A seven-free-degree dynamic model of the ship lift based on the Lagrange equation of the second kind is then established, including the ship chamber, the wire rope, the gravity counterweights and the liquid in the ship chamber. Subsequently, an eigenvalue equation is obtained with the coefficient matrix of the dynamic equations, and a key coefficient is analyzed by innovative use of the minimum optimization method for a stability criterion. Also, an extensive influence of the structural parameters contains the gravity counterweight wire rope stiffness, synchronous shaft stiffness, lifting height and hoists radius on the critical distance of lifting points is numerically analyzed. With the Runge-Kutta method, the four primary dynamical responses of the ship lift are investigated to demonstrate the accuracy/reliability of the result from the theoretical formulation. It is revealed that the critical distance of lifting points decreases with increasing the synchronous shaft stiffness, while increases with rising the other three structural parameters. Moreover, the theoretical formulation is more applicable than the previous criterions to design the layout of the fully balanced hoist vertical ship lift for the ensuring of the stability.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.41 no.3
• /
• pp.205-209
• /
• 2017

Unlike spherical drop impact, ellipsoidal drop impact can control the bouncing height on a heated surface by significantly altering impact behavior. To scrutinize the effect of the aspect ratio (AR) of the drop on the bounce suppression, in this study, non-axisymmetric spreading behaviors are observed from two side views and characterized based on the spreading width of the drop for horizontal principal axes. In addition, the maximum spreading width is investigated for various ARs. The results show that as the AR increases, the maximum spreading width of the minor axis increases, whereas that of the major axis shows no significant variation. In the regime of high AR and high impact velocity, liquid fragmentations by three parts are observed during bouncing. These fragmentations are discussed in this work. The hydrodynamic features of ellipsoidal drop impact will help understand bouncing control on non-wetting surfaces for several applications, such as self-cleaning and spray cooling.

• Korean Journal of Medicinal Crop Science
• /
• v.14 no.2
• /
• pp.107-112
• /
• 2006

Two Atractylodes species, A. japonica Koidz. ex Kitam. (AJ) and A. macrocephala Koidz (AM) were used in this study. AJ population had higher amounts of Sesquiterpenoids and stronger tolerance to root rot but less vigor of root growth than AM population. Two populations (AJ and AM) were crossed to make interspecific hybrid population. A total of 98 lines propagated clonally were selected from a cross of AJ and AM, and evaluated for contents of sesquiterpenoids, atractylon (ATLN) and atractylenolide III (AT3) using high performance liquid chromatography (HPLC), and growth characters such as plant height, stem number and root weight. HPLC profiles of the hybrids were compared with those of parent plants, and it demonstrated the production of introgression hybrid by crossing between AJ and AM. Of 98 clonal lines,10 lines were selected by 10% level based on the growth vigor and tolerance to root rot, and AJM2102-51 line showed the heaviest root weight (117.1 g/plant) among them. A total of 98 hybrid lines contained on average $0.16\;{\pm}\;0.10\;mg/g$ of $AT3,\;2.00\;{\pm}\;1.37\;mg/g$ of ATLN, and $2.16\;{\pm}\;1.40\;mg/g$ of total sesquiterpenoids, showing high coefficients of variation (above 65%). Ten lines having high contents of sesquiterpenoids were selected, and AJM2101-15 had the highest amount (9.83 mg/g) of ATLN, and showed 40.8 g/plant of root weight similar to mean value (39.9 g/plant) of hybrid lines. The result showed that the introgression of both characters of vigorous growth from AM and high sesquiterpenoids content from AJ could be possible to make new hybrid lines by crossing between AJ and AM.

• Journal of the Korean Institute of Gas
• /
• v.3 no.2 s.7
• /
• pp.77-84
• /
• 1999

The XX company that is handling the class IV hazardous materials, located in Bu-Chon City and the LPG station in front of the XX company which is about 20 meters apart, was chosen as the standard model for this study In carrying out the consequence analysis, PHAST and Super-Chems were used for the study and utilizing the output of the simulation, we have evaluated the consequences throughout the probit analysis and explosion overpressure analysis. In case of Acetone, the effect distance of the damage on facilities-that is the result of radiation heat flux of $37.5kW/m^2$ by TNO model-is 68.51m by PHAST model and 40.93m by Super-Chem model. The risk assessment of the LPG station which is based on the explosion resulted as the analysis of the fire ball showed the diameter 125.2m, the height 206.2m and the duration 11.28sec and the effect distance for the radiant heat flux $37.5kW/m^2$ was 137.0m.

• Journal of Microbiology and Biotechnology
• /
• v.15 no.4
• /
• pp.809-814
• /
• 2005

Gibberellins (GAs) play an important role in plant growth and development. Fifteen fungi were isolated from Physalis alkekengi var francheti plant roots, and among them, four isolates showed GA-production activity. A bioassay using waito-c rice was carried out with the culture fluid of the GA-producing fungi. The GA-producing fungi were cultured for 7 days in Czapek's liquid medium at $30^{\circ}C$, 120 rpm, under dark conditions. The culture broth was concentrated 30-fold and 10 ${\mu}l$ of that concentrate was applied to 2-leaf rice sprouts. The height of the rice seedlings treated with the culture fluid of isolate PA08 was 26 cm high, while that of the seedlings treated with the wild-type Gibberella fujikuroi was 13 cm high. As such, the plant growth-promoting activity exhibited by isolate PA08 was 2 times stronger than that exhibited by the wild-type G fujikuroi. The amounts of $GA_l,\;GA_3,\;GA_4,\;GA_7,\;GA_9,\;GA_{20}$, and $GA_{24}$ in the medium were measured using gas chromatography-mass spectrometry (GC-MS), and the quantities produced by isolate PA08 were 4.85 ng/ml, 4.79 ng/ml, 17.30 ng/ml, 6.01 ng/ml, 16.61 ng/ ml, 0.08 ng/ml, and 17.30 ng/ml, respectively. Isolate PA08 was also identified as Fusarium proliferatum KGL0401 by a genetic analysis of the nucleotide sequences of the internal transcribed spacer region of the ribosomal DNA.