• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.67-70
• /
• 2015

We studied the state of the dual liquid crystal (LC) alignment which displays both homeotropic and homogeneous alignment on blended polyimide (PI) layer. The research was conducted using rubbing method at different imidizing temperatures and the blended PI was made using homeotropic PI having an alkyl side chain and homogeneous PI without the side chain. The uniform LC alignments were achieved, and have thermal stability. The results of contact angles were similar to that of pretilt angles.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.15 no.10
• /
• pp.902-908
• /
• 2002

Homogeneously aligned nematic liquid crystal displays (LCDs) driven by in-plane or fringe field were known to exhibit wide viewing angle and appeared to be black in the off state. However, the existence of spacers inside the cell causes the deformation of the liquid crystal molecules. Such a deformation of the liquid crystal causes light-leakage in the dark state, which lowers contrast ratio of the display. We found that the light-leakage due to deformation of the LC director near the spacer mainly depends on the dielectric anisotropy and the ratio of elastic constants of the LC. In this paper, the mechanism on deformation of the LC near spacer is investigated by optical polarizing microscopy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.427-429
• /
• 2002

In this paper, we investigated dynamic behaviors of liquid crystal director profiles by simulating two different modeling equations based on vectorial and tensorial approaches. By performing 3-dimensional simulation for a unit pixel, we found that the simulation results from the each of modeling equations lead to different motional behaviors of liquid crystal directors around the disclination line. This is due to the fact that the vectorial approach has a physically meaningless sign of liquid crystal director ${\overline{n}}$. Consequently, it is clarified that the tensorial approach gives more realistic behaviors for the rotation of the directors around the disclination line when the voltages were removed since it maintains nematic symmetry that gives an equivalence of ${\overline{n}}$ and its opposite - ${\overline{n}}$.

• Journal of Information Display
• /
• v.10 no.4
• /
• pp.175-179
• /
• 2009

As the physical properties of nematic liquid crystals vary with respect to temperature, the performances of liquid crystal displays (LCDs) are highly dependent on temperature. Additionally, it is well known that the electro-optic characteristics of LCDs, such as transmittance and threshold voltage, also rely on the LCD switching modes. The temperature dependence of the electro-optic characteristics of the wide-viewing-angle LCD modes, such as in-plane switching (IPS), multidomain vertical alignment by patterned electrode (PVA), and fringe-field switching (FFS), have been studied, and the results showed that the FFS mode has lower temperature dependence compared to the IPS and PVA modes. Since the liquid crystal (LC) reorients in different ways in each mode, this result is associated with the temperature dependence of LC's bend and twist elastic constants, and also with the position of the main reorientation, either in the middle or on the surface of the LC layer.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.834-838
• /
• 2004

We report on a simple method of fabricating multimode transflective liquid crystal displays (LCDs) using the photoalignment technique. Using a self-masking process of ultraviolet light by the reflector as a photomask as well as a reflective mirror, the periodic multimode is obtained with no additional fabrication processes. Moreover, variations of the cell gap are not required for such trasflective LCDs

• 한국정보디스플레이학회:학술대회논문집
• /
• 2004.08a
• /
• pp.379-382
• /
• 2004

Microoptics has become the key technology in liquid crystal display systems due to its capabilities of miniaturization and design flexibility. We successfully demonstrate five different microoptical components for enhancing the image quality, providing better functions, increasing light efficiency, and generating 3D images in LCD applications.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.305-308
• /
• 2003

We fabricated a flexible ferroelectric liquid crystal (FLC) device containing polymer walls and networks which fix plastic film substrates. The device using 100-${\mu}m$-thick substrates could be bent in a radius of 7mm without disordering the FLC alignment. When sandwiched between polarizers a roll-up display with high-speed grayscale capability for moving-image displays was created.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.943-946
• /
• 2002

Liquid Crystal Spatial Light Modulators (LC-SLMs) provide many interesting applications in laser optics and opto-electronic systems, in addition to displays. Among them, three topics developed at Thales Research & Technology are reviewed: wavefront correction for laser beam control, microwave processing in radar systems and holography for TN-LCDs viewing angle compensation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.97-100
• /
• 2005

The recent Bistable Nematic ($BiNem{(R)}$) LCD technology presents long term bistability, high level passive matrix multiplexing and high optical quality. The BiNem device, based on anchoring breaking, needs specific low anchoring strength materials - alignment layers and liquid crystal mixtures. We present here our approach to develop nematic mixtures with wide enough temperature range and low zenithal anchoring energy.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2007.08a
• /
• pp.897-899
• /
• 2007

Transparent electrodes for a flexible display based on the liquid crystal (LC) were formed by carbon nanotubes (CNTs) on polyethylene terephthalate (PET) substrates. The thin multi wall carbon nanotubes (t-MWNTs) networks for electrodes were obtained by filtration- transfer method from welldispersed CNTs solution.