• 한국유체기계학회 논문집
• /
• 제5권1호
• /
• pp.27-32
• /
• 2002

The turbopump inducer cavitation is very important for the success of a liquid rocket engine. In this study, the performance test and cavitation performance test were carried out at various rotational speeds with two inducers of different diameter. The rotational speed was varied by 4000, 6000, and 8000 rpm, and the size effect was tested for the normal inducer and twice-enlarged one. The hydraulic performance results showed that the similarity was satisfied over the entire test range of the present study. The blade thickness effect was examined and showed that the increased blade thickness resulted in decreased efficiency and worse cavitation performance for the large tip clearance. The cavitation performance test results showed that the breakdown NPSH increased as the flow coefficient, and was not affected by the rotational speed.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2001년도 유체기계 연구개발 발표회 논문집
• /
• pp.229-234
• /
• 2001

The turbopump inducer cavitation is very important for the success of a Liquid rocket engine. In this study the performance test and cavitation performance test were carried out at various rotational speed with two different diameter inducers. The rotational speed were varied 4000, 6000, 8000 rpm and the variation to the diameter of an inducer were taken as design size and 2 times enlarged size. The major results of the present study were as follows. 1. The hydraulic performance results showed that the similarity was met over the entire test range of the present study. 2. The blade thickness effect was examined and showed that the increased blade thickness resulted in decreased efficiency and worse cavitation performance for large tip clearance. 3. The cavitation performance test results showed that the breakdown NPSH increases as the flow coefficient and does not affected by the rotational speed.

• 한국안전학회지
• /
• 제15권1호
• /
• pp.86-92
• /
• 2000

Recently, more advanced electronic elements become, they consume powerful and radiate more heat in devices. So the most suitable packaging technique is keenly needed. The most important purpose of packaging is to protect devices within a system for a long time and to prevent life of devices from external environments; floating ions such as humidity or sodium, and exposure from ultraviolet rays. In order to study the electrical properties of silicone gels often used as packing material due to the curing condition, volume resistivity and AC breakdown experiment are performed. Specimens are made up at several cured times and temperatures condition ; 0.5[H], 1[H] and 2[H] at 100[$^{\circ}C$], 125[$^{\circ}C$], 150[$^{\circ}C$], 160[$^{\circ}C$], 170[$^{\circ}C$] and 180[$^{\circ}C$]. It is confirmed that from volume resistivity experiment liquid silicone become get state at 90~100 [$^{\circ}C$] and cured specimen for 1~2[H] at 170[$^{\circ}C$] are superior in electrical properties.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.213-217
• /
• 2003

In this paper, we studied electric Insulation characteristics of synthetic Laminated Polypropylene Paper (LPP) in liquid nitrogen (L$N_2$) for the application to high temperature super-conducting (HTS) cable. And, we selected the insulation paper/L$N_2$composite insulation type for the electric insulation design of a HTS cable. Furthermore, we compared the breakdown characteristics of the butt gap and bended mini-model cable that comes into being in this kind of cryogenic insulation type. It is necessary to understand the winding parameter of insulation paper/L$N_2$composite insulation.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2003년도 춘계학술대회 논문집 유기절연재료 방전 플라즈마연구회
• /
• pp.61-64
• /
• 2003

In the response to an increasing demand for electrical energy, much effort aimed to develop and commercialise HTS power equipments is going on around the world. For the development, it is necessary to establish the dielectric technology in $LN_2$. Hence many types of dielectric tests should be carried out to understand the dielectric phenomena at cryogenic temperature and to gather various dielectric data. Among the many types dielectric tests, the barrier effect were conducted with the simulated electrode after analysing the insulating configuration of the pancake coil type HTS transformer. The influence of a barrier on the dielectric strength was measured according to the size and the position of the barrier. It was shown that the effectiveness, the ratio of the breakdown voltage in presence of barrier to the voltage without barrier, is highest when the barrier is placed at the needle electrode side. And the barrier effect was not depend on the electrode array. The life time to breakdown with decreasing the applied voltage was increased remarkably having wide error band but the shape parameter in Weibull distribution was almost constant.

• 한국주조공학회지
• /
• 제21권4호
• /
• pp.253-259
• /
• 2001

There are many methods to produce metal foams, which can be classified into three groups according to the state of the starting metal i.e. liquid or powder or solid. Three types of defects such as cell closing, cell deformation or breakdown and cell misrun are thought to be occurred when we make the open cell aluminum foams by precision casting. Filling ability of the mold slurry between preform is related with cell closing, mold collapsibility is related with cell deformation or breakdown, mold temperature and pouring pressure are related with cell misrun. These factors can be evaluated by measuring slurry fluidity, burnout strength and permeability of the mold. Properties of the plaster mold were evaluated to find optimum mold conditions for high quality open cell aluminum foam in this study. Permeability was almost zero independent of burnout conditions, however, crack initiation was found on the surface of all specimens one or two minutes after taking out from the furnace. Crack has grown and disappeared with time. This crack may facilitate the mold filling when molten metal is poured, because of the improved mold permeability. It was considered that crack initiation and disappearance was closely related with temperature difference between the surface and inner part. Knocking-out the mold is a difficult problem due to the small cell size, because continuous mesh structure of the metal foam is not strong. It is not easy to remove molding material after pouring. We can expect that water quenching can facilitate the knocking-out the mold after solidification without damaging cell structures. Collapsed particles after water quenching became bigger with the increase in time.

• 한국재료학회지
• /
• 제21권6호
• /
• pp.309-313
• /
• 2011

The power capacitors used as vehicle inverters must have a small size, high capacitance, high voltage, fast response and wide operating temperature. Our thin film capacitor was fabricated by alumina layers as a dielectric material and a metal electrode instead of a liquid electrolyte in an aluminum electrolytic capacitor. We analyzed the micro structures and the electrical properties of the thin film capacitors fabricated by nano-channel alumina and metal electrodes. The metal electrode was filled into the alumina nano-channel by electroless nickel plating with polyethylene glycol and a palladium catalyst. The spherical metals were formed inside the alumina nano pores. The breakdown voltage and leakage current increased by the chemical reaction of the alumina layer and $PdCl_2$ solution. The thickness of the electroless plated nickel layer was 300 nm. We observed the nano pores in the interface between the alumina layer and the metal electrode. The alumina capacitors with nickel electrodes had a capacitance density of 100 $nF/cm^2$, dielectric loss of 0.01, breakdown voltage of 0.7MV/cm and leakage current of $10^4{\mu}A$.

• 한국식품과학회지
• /
• 제43권2호
• /
• pp.235-239
• /
• 2011

홍국 배아미 5%와 10% 벌꿀용액으로 제조한 홍국 발효액종을 10-40% 첨가하여 밀가루 반죽의 레올로지 특성으로 falling number, RVA(rapid visco analyzer), farinograph, alveograph 등을 분석하였다. 홍국 발효액종 첨가량이 증가할수록 falling number 값이 낮아졌으며 10% 첨가시 $363{\pm}7.8s$, 20% 첨가시 $318{\pm}2.1s$이었다. 호화도 특성에서 홍국 발효액종 첨가량이 증가할수록 초기점도 온도와 breakdown은 상승하였고, 최고점도와 set-back값은 낮아졌다. Farinograph에서 대조구와 시험구간에 흡수율은 64.3-65.0%로 유의적 차이가 없었으나 반죽형성시간은 발효액종의 첨가량이 증가할수록 빨라졌고, 안정도는 저하되어 20% 첨가시는 9.3 min, 40% 첨가시는 3.0 min이었으며 약화도도 빨라졌다. Alveograph에서 $P_{max}(mm)$는 대조구가 158.0 mm이었으나 발효액종 첨가량이 많을수록 증가하여 40% 첨가시 190.0 mm이었다. 그러나 L, G, W 등의 값은 낮아졌다. 이상의 실험으로 홍국 발효액종을 20% 첨가까지는 반죽의 레올로지 특성인 제빵적성에 영향이 적어 빵 제조가 가능한 것으로 나타났다.

• 자원환경지질
• /
• 제40권5호
• /
• pp.563-574
• /
• 2007

LIBS는 시료 표면에서 발생된 플라즈마로부터 방출되는 원자들의 분광선을 측정함으로써 물질의 화학적 조성을 감지, 확인, 정량화할 수 있는 최신의 분석기술로 기존의 전형적인 원소분석방법에 비해 현장분석기술로서의 더 많은 장점을 가지고 있다. LIBS는 최소한의 시료로 복잡한 분석과정을 피함으로 신속한 분석을 가능케 하고, 기기의 다방면적의 적용가능성과 단순함으로 인해 신속하게 가스, 고체, 액체상에서 다원소를 동시에 분석할 수 있는 레이저 기반의 분석기술로 지구화학적 분석, 탐사 혹은 환경분석에서 현장 이동성을 가진 센서로의 가능성 측면에서 매력적인 도구가 된다. 그러나 현장분석기술로서 토양환경에 적용하기에는 여전히 해결해야 할 문제들이 있다. 문헌연구를 통해 기본적인 작용원리인 플라즈마 형성과 물질붕괴과정을 고찰하고 현장분석기술로서 LIBS의 현 위치를 살펴본다. 또한 토양환경에 적용하기 위해 매질의 특성, 레이저 특성 및 분석신호에 영향을 미치는 다양한 인자들을 살펴보아 LIBS에 대한 기본적 이해를 돕고자 한다. 또한 분석에 미치는 영향 인자들을 보정해 분석 결과의 정확도, 정밀도 및 검출 한계 등 분석의 질을 향상 시킬 수 있는 기법 등을 다양한 문헌 연구를 통해 살펴봄으로써 추후 국내 토양환경분야의 LIBS 현장기술의 적용가능성을 고찰해보고자 한다.

• 전기학회논문지
• /
• 제56권9호
• /
• pp.1561-1565
• /
• 2007

According to thermal degradation on power transformers, it is known that electrical, mechanical and chemical characteristics for power transformer's oil-paper are changed. In the chemical property, especially, when the kraft paper is aged, the cellulose polymer chains break down into shorter lengths. It causes decrease in both tensile strength and degree of polymerization of paper insulation. Also the paper breakdown is accompanied by an increase in the content of various furanic compounds within the dielectric liquid. It is known that furanic components in transformer oil come only from the decomposition of insulating paper rather than from the oil itself. Therefore the analysis of furanic degradation products provides a complementary technique to dissolved gas analysis for monitoring transformers when we evaluate the aging of insulating paper by the total concentration of carbon monoxide and carbon dioxide dissolved in oil only. Recently, the analysis of furanic compounds by high performance liquid chromatography(HPLC) using IEC 61198 method for estimating degradation of paper insulation in power transformers has been used more conveniently for assessment of oil-paper. It is know that the main products which is produced by aging are 2-furfuryl alcohol, 2-furaldehyde(furfural), 2-furoic acid, 2-acetylfuran, 5-methyl-2-furaldehyde, and 5-hydroxymethyl-2-furaldehyde. For investigating the accelerated aging process of oil-paper samples we manufactured accelerating aging equipment and we estimated variation of insulations at $140^{\circ}C$ temp. during 500 hours. Typical transformer proportions of copper, silicon steel and iron have been added to oil-paper insulation during the aging process. The oil-paper insulation samples have been measured at intervals of 100 hours. Finally we have analyzed that 2-furoic acid and 2-acetylfuran products of furanic compounds were detected by HPLC, and their concentrations were increased with accelerated aging time.