• Nuclear Engineering and Technology
• /
• 제35권2호
• /
• pp.165-170
• /
• 2003

We developed an improved 3-PM liquid scintillation counting (3-PM LSC) method in which three detectors can be displaced to back and forth directions, and a data acquisition system being able to provide the values for all parameters required for the method. The detectors are entirely located in a 20-mm lead chamber of an inner diameter of 500 mm. A saw-toothed gear ties up all detectors so as to move them uniformly, up to 50 mm with unit of 1 mm. The data acquisition system was designed in an integrated circuit to perform the necessary works such as fast amplification, discrimination, coincidence and logic analysis. It generates values of nine parameters among twelve's generated in the 3-PH LSC method. The dead time of each counting channel is of extending type, valving from 10 to 100 $mutextrm{s}$. We measured the TDCR values with an unquenched liquid scintillation source 1"C by displacing the detectors with a step of 2.5 mm away from counting vial. Their values were derived on the range from 0.9 to 0.6. The extent is three times wider than those regions observed by applying the defocalization technique.ique.

• 한국세라믹학회지
• /
• 제27권4호
• /
• pp.447-456
• /
• 1990

ZnWO4 single crystals were grown by Czochralski method. And the orientation of grown crystals were determined by Laue back reflection, and the crystals were siliced at (100), (010), (001) face before polishing. The morphologys and distribution of etch pits on each face were observed by optical microscopy. In the present study, we understood that dislocation distributjioon rely on shape of solid-liquid interface, and secondary phase acts on the dislocation source. We also observed dislocation trace(etch pits) of (100) slip plane on (010) cleavage plane.

• 한국광학회:학술대회논문집
• /
• 한국광학회 1989년도 제4회 파동 및 레이저 학술발표회 4th Conference on Waves and lasers 논문집 - 한국광학회
• /
• pp.5-6
• /
• 1989

The overall design of the optical isolator system is prepared for the 1 TW Nd pulse laser. Two pockels cell optical switches are employed to suppress the amplified spontaneous emission and the backward reflection. The role of two Farady rotators is to protect the laser system from the light amplified after back reflection. One saturable absorber dye and one liquid crystal polarizer/isolator will also serve as optical isolator.

• 한국분무공학회지
• /
• 제8권2호
• /
• pp.1-6
• /
• 2003

The liquid phase LPG injection (LPLI) system (the third generation technology) has been considered as one of the next generation fuel supply systems for LPG vehicles, since it has a very strong potential to accomplish the higher power, higher efficiency, and lower emission characteristics than the mixer type(the second generation technology) fuel supply system However. when a liquid LPG fuel is injected into the inlet duct of an engine, a large quantity of heat is extracted due to evaporation of fuel. This leads to freezing of the moisture in the air around the outlet of a nozzle, which is called icing phenomenon. It may cause damage to the outlet nozzle of an injector or inlet valve seat. In this work, the experimental investigation of the icing phenomenon was carried out The results showed that the icing phenomenon and process were mainly affected by humidity of inlet air instead of air temperature in the inlet duel. Also, it was observed that the total ice formed around the nozzle weighs at about $150mg{\sim}260mg$ after injection for ten minutes. And some fuel species were found in the ice attached at the front side of a nozzle, while frozen ice attached at the back of a nozzle was mostly' consisted of moisture of inlet air. Therefore, some frozen ice deposit. detached from front nozzle of an injector, may cause a problem of unfavorable air fuel ratio control in the small LPLI engine.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제4권1호
• /
• pp.51-58
• /
• 1999

A mathematical model for a three phase fluidized bed bioreactor (TFBBR) was proposed to describe oxygen utilization rate, biomass concentration and the removal efficiency of Chemical Oxygen Demand (COD) in wastewater treatment. The model consisted of the biofilm model to describe the oxygen uptake rate and the hydraulic model to describe flow characteristics to cause the oxygen distribution in the reactor. The biofilm model represented the oxygen uptake rate by individual bioparticle and the hydrodynamics of fluids presented an axial dispersion flow with back mixing in the liquid phase and a plug flow in the gas phase. The difference of setting velocity along the column height due to the distributions of size and number of bioparticle was considered. The proposed model was able to predict the biomass concentration and the dissolved oxygen concentration along the column height. The removal efficiency of COD was calculated based on the oxygen consumption amounts that were obtained from the dissolved oxygen concentration. The predicted oxygen concentration by the proposed model agreed reasonably well with experimental measurement in a TFBBR. The effects of various operating parameters on the oxygen concentration were simulated based on the proposed model. The media size and media density affected the performance of a TFBBR. The dissolved oxygen concentration was significantly affected by the superficial liquid velocity but the removal efficiency of COD was significantly affected by the superficial gas velocity.

• 대한화학회지
• /
• 제41권9호
• /
• pp.471-482
• /
• 1997

기체크로마토그래피/질량분석법(GC/MS)을 이용하여 소변 내에 존재하는 유기산들을 동시에 분리 정량분석할 수 있는 최적의 분석조건을 확립하기 위해 액체-액체추출법을 이용하여 분리하였고 이 때 pH의 영향 및 역추출방법과 그리고 옥심화 과정 첨가의 효과를 알아보았다. 그 결과 옥심화 과정 없이 pH가 0.5일 때 회수율이 좋았고 RSD값은 0.3-12.4%로 가장 적었다. 역추출과정을 통하여 방해물질이 제거되어 15-16분대의 머무름 값을 갖는 몇가지 유기산 검출이 확실시 되었다. 이를 토대로 51종의 유기산들에 대한 검량곡선을 작성하여 한국 정상어린이(n=16) 요시료 중의 유기산 함량분포를 얻었다.

• 융합신호처리학회논문지
• /
• 제7권4호
• /
• pp.161-168
• /
• 2006

본 논문에서는 LCD 조립이 완료된 제품에 대해 색상보정 기법을 이용한 LCD 패턴검사 방법을 제안하였다. 기존의 검사 시스템은 패턴 매칭에 의한 검사 기법을 많이 사용하고 있다. 이러한 방법은 LCD의 백라이트(back light) 장치의 휘도차이, 액정의 광특성, 구동특성에 의해 투과되는 빛의 차이, 주위 조명에 의한 색차 등을 보정 할 수 없으며, 또한 이로 인해 불량검출의 효율성을 저하시키는 원인이 된다. 제안하는 검사 방법은 다양한 원인에 의해 발생하는 LCD의 색상 차를 보정한 후 패턴 매칭을 통해 불량을 검출하는 방법이다. 먼저, 검사 대상인 LCD 패턴의 색상을 기준 영상에서 설정된 색상으로 보정한다. 색상이 보정된 영상은 다양한 전처리 기법을 적용하여 패턴 검사를 수행한다. 실험을 통하여 본 연구에서 제안한 알고리듬은 LCD 패널에서 여러 가지 불량품을 검출 할 수 있었고, 또한 제안된 방식은 기존의 방식과 비교하여 불량 검출이 용이함을 알 수 있었다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.421-422
• /
• 2011

The first part is about development of a liquid target for a neutron source, which is designed to overcome many of the limitations of traditional beam-target neutron generators by utilizing a liquid target neutron source. One of the most critical aspects of the beam-target neutron generator is the target integrity under the beam exposure. A liquid target can be a good solution to overcome damage to the target such as target erosion and depletion of hydrogen isotopes in the active layer, especially for the one operating at high neutron fluxes with no need for water cooling. There is no inherent target lifetime for the liquid target neutron generator when used with continuous refreshment of the target surface exposed to the energetic beam. In this work, liquid target containing hydrogen has been developed and tested in vacuum environment. Potentially, liquid targets could allow a point neutron source whose spatial extension is on the order of 1 to $10{\mu}m$. And the second is about the vacuum ultraviolet (VUV) spectrometer which is designed as a five-channel spectral system for ITER main plasma measurement. To develop and verify the design, a two-channel prototype system was fabricated with No. 3 (14.4 nm~31.8 nm) and No. 4 (29.0 nm~60.0 nm) among the five channels. For test of the prototype system, a hollow cathode lamp is used as a light source. The system is composed of a collimating mirror to collect the light from source to slit, and two holographic diffraction gratings with toroidal geometry to diffract and also to collimate the light from the common slit to detectors. The two gratings are positioned at different optical distances and heights as designed. To study the appropriate detector for ITER VUV system, two different electronic detectors of the back-illuminated charge coupled device and the micro-channel plate electron multiplier were installed and the performance has been investigated and compared in the same experimental conditions. The overall system performance was verified by measuring the spectrums.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1196-1200
• /
• 2004

Micropump is very useful component in micro/nano fluidics and bioMEMS applications. In this study, a bubble-powered micropump was fabricated and tested. The micropump consists of two-parallel micro line heaters, a pair of nozzle-diffuser flow controller and a 1 mm in diameter, 400 ${\mu}m$ in depth pumping chamber. The two-parallel micro line heaters with 20 ${\mu}m-width$ and 200 ${\mu}m-length$ were fabricated to be embedded in the silicon dioxide layer of a wafer which serves as a base plate for the micropump. The pumping chamber, the pair of nozzle-diffuser unit and microchannels including the liquid inlet and outlet port were fabricated by etching through another silicon wafer. A glass wafer (thickness of $525{\pm}15$ ${\mu}m$) having two holes of inlet and outlet ports of liquid serve as upper plate of the pump. Finally the silicon wafer of the base plate, the silicon wafer of pumping chamber and the glass wafer were aligned and bonded (Si-Si bonding and anodic bonding). A sequential photograph of bubble nucleation, growth and collapse was visualized by CCD camera. Clearly liquid flow through the nozzle during the period of bubble growth and slight back flow of liquid at the end of collapsing period can be seen. The mass flow rate was found to be dependent on the duty ratio and the operation frequency. As duty ratio increases, flow rate decreases gradually when the duty ratio exceeds 60%. Also as the operation frequency increases, the flow rate of the micropump decreases slightly.

• 공업화학
• /
• 제19권6호
• /
• pp.661-667
• /
• 2008

본 연구에서는 LCD 백라이트용 휘도향상 편광필름으로 사용하기 위해, 콜레스테릭 액정(CLC)을 합성하여 네미틱 액정과 혼합한 다음 이들이 충진된 모듈을 제작하였다. 광확산필름에 의해 면광원화된 빛을 통과시킬 때, LCD 백라이트상에서 이들의 투과광 증폭 및 편광능력에 대한 특성을 연구하였다. 합성된 콜레스테릭 액정의 특성은 UV/Visible 스펙트럼과 편광현미경(POM) 등으로 평가하였다. 여러 종류의 선형 카르복실산을 콜레스테롤 분자에 도입하여 콜레스테릭 메소젠 사이의 유연격자를 이루도록 유도하여 각 층에서 일정한 방향성을 유지하도록 하였다. 또한 CLC필름을 적층하여 가시광선대에서 편광능력, 휘도향상 및 투과파장영역을 넓히고 백라이트 유니트의 밝기를 향상시키는 모듈로 적용할 수 있었다.