• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.252.2-252.2
• /
• 2013

ZnO nanostructures have a lot of interest for decades due to its varied applications such as light-emitting devices, power generators, solar cells, and sensing devices etc. To get the high performance of these devices, the factors of nanostructure geometry, spacing, and alignment are important. So, Patterning of vertically- aligned ZnO nanowires are currently attractive. However, many of ZnO nanowire or nanorod fabrication methods are needs high temperature, such vapor phase transport process, metal-organic chemical vapor deposition (MOCVD), metal-organic vapor phase epitaxy, thermal evaporation, pulse laser deposition and thermal chemical vapor deposition. While hydrothermal process has great advantages-low temperature (less than $100^{\circ}C$), simple steps, short time consuming, without catalyst, and relatively ease to control than as mentioned various methods. In this work, we investigate the dependence of ZnO nanowire alignment and morphology on si substrate using of nanosphere template with various precursor concentration and components via hydrothermal process. The brief experimental scheme is as follow. First synthesized ZnO seed solution was spun coated on to cleaned Si substrate, and then annealed $350^{\circ}C$ for 1h in the furnace. Second, 200nm sized close-packed nanospheres were formed on the seed layer-coated substrate by using of gas-liquid-solid interfacial self-assembly method and drying in vaccum desicator for about a day to enhance the adhesion between seed layer and nanospheres. After that, zinc oxide nanowires were synthesized using a low temperature hydrothermal method based on alkali solution. The specimens were immersed upside down in the autoclave bath to prevent some precipitates which formed and covered on the surface. The hydrothermal conditions such as growth temperature, growth time, solution concentration, and additives are variously performed to optimize the morphologies of nanowire. To characterize the crystal structure of seed layer and nanowires, morphology, and optical properties, X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and photoluminescence (PL) studies were investigated.

• FLOWER RESEARCH JOURNAL
• /
• v.17 no.1
• /
• pp.9-14
• /
• 2009

This study was conducted to find out the commercial in vitro propagation methods through protocom-like bodies (PLB) induced from shoot tip culture of Miltonia spp. Among several culture media for induction PLB from shoot tip in Miltonia spp., MS basal medium was better than Hyponex, Vacin & Went basal medium and other media supplemented with natural additives. PLB's proliferation and differentiation in Hyponex medium including $20g{\cdot}L^{-1}$ banana + $20g{\cdot}L^{-1}$ sucrose(pH 5.2) was better than in MS medium. It was tendency that solid media showed higher PLB fresh weight than liquid medium or other cotton bridge culture. The dark culture for 1~2 weeks and adding $10{\sim}20g{\cdot}L^{-1}$ sucrose on hyponex basal medium was the most effective to increase the PLBs growth and shoot number.

• Applied Chemistry for Engineering
• /
• v.30 no.1
• /
• pp.34-38
• /
• 2019

A cement industrial by-product was used as a Ca source for the carbonation process. It was confirmed that the most of cement industrial by-products was composed of CaO and KCl through ICP and XRD analyses. The optimal extractant type and concentration was 1.5 M of hydrochloric acid, and the solid/liquid ratio was 0.1 g/mL. It was assumed that the cation extraction efficiency was dependent of the pair ions and their binding formation and also the solubility from extraction efficiency results by varing extractants. After extraction process, it was also confirmed that the cation could be selectively separated from the solution with respect to the kind of additives and the injection order. When NaOH was injected into the solution to control pH values ranging from 9.5 and 13, impurities and $Ca(OH)_2$ were precipitated, whereas the separated K ion was precipitated in the form of KCl under the injected $C_2H_5OH$.

• Particle and aerosol research
• /
• v.15 no.1
• /
• pp.1-13
• /
• 2019

Current desulfurization and denitrification technologies have reached a considerable level in terms of reduction efficiency. However, when compared with the simultaneous reduction technology, the individual reduction technologies have issues such as economic disadvantages due to the difficulty to scale-up apparatus, secondary pollution from wastewater/waste during the treatment process, requirement of large facilities for post-treatment, and increased installation costs. Therefore, it is necessary to enable practical application of simultaneous SOx and NOx treatment technologies to remove two or more contaminants in one process. The present study analyzes a technology capable of maintaining simultaneous treatment of SOx and NOx even at low temperatures due to the electrochemically generated strong oxidation of the wet-pulse complex system. This system also reduces unreacted residual gas and secondary products through the wet scrubbing process. It addresses common problems of the existing fuel gas treatment methods such as SDR, SCR, and activated carbon adsorption (i.e., low treatment efficiency, expensive maintenance cost, large installation area, and energy loss). Experiments were performed with varying variables such as pulse voltage, reaction temperature, chemicals and additives ratios, liquid/gas ratio, structure of the aeration cleaning nozzle, and gas inlet concentration. The performance of individual and complex processes using the wet-pulse discharge reaction were analyzed and compared.

• Journal of the Korean Applied Science and Technology
• /
• v.36 no.3
• /
• pp.813-820
• /
• 2019

The influence of cholesterol on the physicochemical properties of the oleic acid was clarified through the measurements of density, viscosity, IR, $^1H$ NMR, self-diffusion coefficient for the oleic acid samples containing a small amount of additives such as cholesterol, cholestanol, cholestane, cholesteryl oleate, benzene, and ethanol. Cholesterol, possessing one OH group and one double bond in its molecular structure, largely increased the viscosity and reduced the self-diffusion coefficient and the intramolecular movement of oleic acid. Oleic acid forms a complex with cholesterol as well as with ethanol. On the basis of these complex formations and the existence of the clusters composed of oleic acid dimers, it was known the role and the fundamental mechanism of cholesterol to the intermolercular and intramolecular movements of oleic acid in the liquid state.

• Journal of Animal Science and Technology
• /
• v.63 no.1
• /
• pp.16-24
• /
• 2021

The suppressive effect of monensin as an ionophore-feed additive on enteric methane (CH4) emission and renewable methanogenesis were evaluated. To clarify the suppressive effect of monensin a respiratory trial with head cage was performed using Holstein-Friesian steers. Steers were offered high concentrate diets (80% concentrate and 20% hay) ad libitum with or without monensin, galacto-oligosaccharides (GOS) or L-cysteine. Steers that received monensin containing diet had significantly (p < 0.01) lower enteric CH4 emissions as well as those that received GOS containing diet (p < 0.05) compared to steers fed control diets. Thermophilic digesters at 55℃ that received manure from steers fed on monensin diets had a delay in the initial CH4 production. Monensin is a strong inhibitor of enteric methanogenesis, but has a negative impact on biogas energy production at short retention times. Effects of the activity of coprophagous insects on CH4 and nitrous oxide (N2O) emissions from cattle dung pats were assessed in anaerobic in vitro continuous gas quantification system modified to aerobic quantification device. The CH4 emission from dungs with adults of Caccobius jessoensis Harold (dung beetle) and the larvae of the fly Neomyia cornicina (Fabricius) were compared with that from control dung without insect. The cumulative CH4 emission rate from dung with dung insects decreased at 42.2% in dung beetles and 77.8% in fly larvae compared to that from control dung without insects. However, the cumulative N2O emission rate increased 23.4% in dung beetles even though it reduced 88.6% in fly larvae compared to dung without coprophagous insects. It was suggested that the antibacterial efficacy of ionophores supplemented as a growth promoter still continued even in the digested slurry, consequently, possible environmental contamination with the antibiotics might be active to put the negative impact to land ecosystem involved in greenhouse gas mitigation when the digested slurry was applied to the fields as liquid manure.

• Journal of the Korean Society of Food Culture
• /
• v.36 no.1
• /
• pp.66-75
• /
• 2021

Microalgae are unicellular microorganisms inhabiting various ecosystems of the world, including marine and freshwater systems and extreme environments. Only a few species have been actively used as food. Microalgae are attracting attention as a means of biological CO2 reduction because they play an important role in absorbing atmospheric CO2 through their rapid growth by photosynthesis in water. Besides, microalgae are considered to be an eco-friendly energy source because they can rapidly produce biomass containing a large quantum of lipids that can be converted into biodiesel. Several microalgae, such as Chlorella spp., Spirulina spp. and Haematococcus spp. have already been commercialized as functional health supplements because they contain diverse nutrients including proteins, vitamins, minerals, and functional substances such as docosahexaenoic acid (DHA), β-glucan, phycocyanin, astaxanthin, etc. Moreover, they have the potential to be used as food materials that can address the protein-energy malnutrition (PEM) which may occur in the future due to population growth. They can be added to various foods in the form of powder or liquid extract for enhancing the quality characteristics of the foods. In this review, we analyzed several microalgae which can be used as food additives and summarized their characteristics and functions that suggest the possibility of a role for microalgae as future food.

• Journal of Environmental Science International
• /
• v.30 no.12
• /
• pp.1041-1051
• /
• 2021

The purpose of this study was to identify for extenders, adhesives, colorants, and fungicides suitable for the production of high-quality film-coated seeds of Chinese cabbage. In addition, the effect of various additives used for film coating on the germination of coated seeds and seedling vigor was investigated to establish appropriate treatment conditions for film coating efficiency. The germination rate and germination speed in Chinese cabbage film-coated seeds did not differ significantly depending on the type and concentration of the extender, while the use of Talc resulted in superior granulation capacity and adhesion of the seed coat in comparison to Zeolite. There was no significant difference in the germination rate depending on the type of adhesive used for film coating of Chinese cabbage seeds, but the germination rate was slightly slower in the film-coated seeds using carboxymethyl cellulose as an adhesive. On the other hand, the seeds coated with a film using 1% PVA as an adhesive not only maintained hardness enough to withstand external pressure, but also showed a high germination rate. In addition, the suitable disinfectant for film coating was venoram, and the treatment concentration was good at 250 mg·L^-1. The type of colorant used in the film-coated seeds of Chinese cabbage did not significantly affect the germination rate, germination speed, and seedling vigor. The seeds film-coated using the liquid colorant were superior in appearance to the seeds film-coated with the solid colorant, which implies the possibility of reduction in the manufacturing costs by using the water-soluble paints as colorants for film-coated seeds.

• Korean Chemical Engineering Research
• /
• v.59 no.3
• /
• pp.305-315
• /
• 2021

An intermeshing corotating twin screw extruder is mainly used for compounding polymeric materials. Twin screw extruder can adopt modular-type screw configurations, which directly controls the quality and productivity of the products. The types, shapes, and specifications of the screw and kneading elements are summarized, and the effects of screw configuration on the processabiliy of the materials are discussed. The principles of screw configuration universally applied to mass production of general-purpose resins are explained, and the guidelines of screw combination according to the roles of feeding, melt mixing, and metering zones are listed. The strategies of screw combination suitable for various cases, such as side feeding of liquid additives or inorganic fillers, reactive extrusion, devolatilization process, production of products requiring bright color and transparency, and processing of materials with low apparent specific gravity, are presented.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.4
• /
• pp.139-144
• /
• 2023

Stone papers made of inorganic filler and plastic polymer do not use pulp, which is the main raw material of existing papers, so they contribute to the preservation of nature and can be used as more eco-friendly materials when they have biodegradability. Since most stone papers are manufactured by hot extrusion, the amount of ceramic fillers and related physical properties are limited to control manufacturing workability. In this study, the stone paper composition was prepared in a liquid form using solvents, so that there was little limitation on the amount of ceramic filler added and it was also easy to add additives to control biodegradability. They were fabricated from eco-friendly raw materials using waste oyster shells as an inorganic filler and (recyclable) PVC materials as an organic binder. After making a solution using common solvents for PVC, inorganic filler and cellulose to impart biodegradability were mixed and processed into sheets to prepare solvent-based stone papers, and their paper properties were evaluated.