• 설비공학논문집
• /
• 제17권2호
• /
• pp.125-130
• /
• 2005

This study was peformed to investigate the phase change temperature, the supercooling, the maintenance time of liquid phase and the change rate of volume of TMA 30 $wt\% clathrate compound with additives. TMA 30 $wt\% clathrate compound with additive was cooled at heat source temperature of $-6^{circ}C$. The additives are ethylene glycol and chloroform. Their concentration are 0.1$wt\% respectively. The experimental results showed that the phase change temperature was not affected by additives and this was average $5.3^{circ}C$. Also the supercooling and the maintenance time of liquid phase were decreased by additives. Especially, the average value of supercooling showed by $8.8^{circ}C$ and the maintenance time of liquid phase was by 19 minutes in the case of chloroform 0.1$wt\%. Additionally, the average change rate of volume showed by $1.26{\~}1.31\%$ according to additives and the volume was decreased by the phase change from liquid to solid.

• 환경위생공학
• /
• 제16권2호
• /
• pp.79-90
• /
• 2001

Commercial liquid seeds are used for supplying active microbial flora to organic wastewater treatment plants of high feed-to-microorganism ratio and to maintain optimal microbial condition during unsteady state operation of the biological wastewater treatment plant. In addition to bacterial cells, the liquid weeds contain various additives for special purposes as well as organic substrates for energy supply. The additives give physical stability for the maintenance of microbial decomposition activity and ability to control the overgrowth of seed strains. In this work, the effects of addition of two kinds of typical substrate additives, poly aluminum chloride(PAC) and poly aluminum sulfate(PAS) on the consitutional total cell counts(CFU/ml) of four kinds of reorganization liquid seeds(RLS I, RLS II, RLS III and RLS IV) were studied experimentally. The addition of PAC and PAS gave negative effect on TCC constitution for the four seeds studied.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.307-310
• /
• 2007

We describe effects of ionic and neutral additives on phase and structural behavior of the lyotropic chromonic liquid crystals used in preparation of optical elements such as polarizers and compensators.

• International Journal of Safety
• /
• 제4권2호
• /
• pp.24-29
• /
• 2005

An experimental study was presented for extinguishing characteristics of liquid fuel fire by water mist($Dv_{0.99}{\leq}200{\mu}m$) containing potassium acetate and sodium acetate trihydrate. To evaluate the extinguishing performance of water mist containing additives, the evaporation characteristics of a water droplet on a heated surface was examined. The evaporation process was recorded by a charge-coupled-device camera. Also, small-scale extinguishing tests were conducted for n-heptane pool fire in ventilated space. During the experiments, flame temperatures were measured, and concentrations of oxygen and carbon monoxide were analyzed by a combustion gas analyzer. The average evaporation rate of water droplet containing additives was lower than that of pure water at a given surface temperature and decreased with the concentration increase due to the precipitation of salt in the liquid-film and change of surface tension. In case of using additives, the fire extinguishing times was shorter than that of pure water at a given discharge pressure and it was because the momentum of a water droplet containing additives was increased. And also dissociated metal atoms, potassium or sodium, were reacted as a scavenger of the major radical species OH, H which were generated for combustion process. Moreover, at a high pressure of 4 MPa, the fire was extinguished through blowing effect as well as primary extinguishing mechanisms.

• 한국식품과학회지
• /
• 제45권5호
• /
• pp.545-549
• /
• 2013

본 연구에서는 GC-FID를 이용하여 식품첨가물공전에 사용량이 정해져 있는 빵류, 캡슐류, 건조과실류 채소류 및 과실류 채소류 중 유동파라핀의 함량을 측정하였다. 시료에서 n-hexane으로 유동파라핀을 추출하고 $KMnO_4$ 산화반응을 통해 추출물 중 불포화탄화수소의 극성을 증대시킨 다음 aluminium oxide를 충진한 SPE 카트리지로 정제하여 GC-FID로 측정하였다. 검출한계와 정량한계는 각각 10 mg/kg과 20 mg/kg으로 개별 n-alkane으로 정량하는 방법이 아닌 넓은 봉우리로 나타나는 유동파라핀의 면적의 합으로 정량하는 문헌들(15,17)의 값과 유사하게 나타났다. 유동파라핀은 빵류, 건조과실류 채소류 및 캡슐류에서 이형제 등으로 사용되고 있으나 최종 완제품에서 사용기준 이하로 검출되었고, 과실류 채소류에서 모두 불검출로 나타남에 따라 안전한 수준으로 관리되고 있음을 알 수 있었다.

• KSBB Journal
• /
• 제25권5호
• /
• pp.459-465
• /
• 2010

A simple and efficient analytical method for the simultaneous determination of seven tar color additives was developed using ion pair high performance liquid chromatography. The conditions for HPLC analysis were as follows: column, ${\mu}$-Bondapak C18 (10 ${\mu}m$, 300 ${\times}$ 3.9 mm i.d.); gradient mobile phase, 0.025 mol/L ammonium acetate (containing 0.01 mol/L tetrabutylammonium bromide)-acetonitrile-methanol (65:25:10) as a mobile for fraction A and 0.025 mol/L ammonium acetate (containing 0.01 mol/L tetrabutylammonium bromide)-acetonitrilemethanol (40:50:10) as a mobile for fraction B; flow rate, 1.0 mL/ min; detection wavelength, 254/520/620 nm. We could attain to the detection limits as 0.01~0.05 ${\mu}$g/mL (254 nm) and 0.005~0.01 ${\mu}$g/mL (520 nm) for six red tar color additives, and 0.05 ${\mu}$g/mL (254 nm) and 0.002 ${\mu}$g/mL (620 nm) for Fast green FCF. This analytical method was applicable to determine the tar color additives contained in several commercial cold syrups.

• 한국축산시설환경학회지
• /
• 제14권2호
• /
• pp.97-104
• /
• 2008

본 연구는 지금까지 활용되었거나 새로이 제안된 액상 첨가제를 돈사에 살포하여 분진 농도의 경시적 변화를 관찰하여 제거 효과에 대해 객관적으로 비교 평가하기 위한 것으로 다음과 같은 결론들을 도출했다. 1. 살포 전 밀폐형 돈사내 분진 농도는 다른 연구자의 결과와 비교시 전반적으로 낮았다. 2. 온도의 경우는 살포 후 24시간까지 돈사 내부와 외부 큰 차이가 없었으나, 상대습도는 살포 후 1시간까지 증가하여 외부와 약 10% 가량의 차이를 보였다. 3. 평가대상 모든 액상 첨가제들의 살포직후 분진 평균 저감율은 살포 전 농도 대비 약 30%로 나타났다(p<0.05). 4. 살포 3시간 이후부터는 콩기름을 제외하고 다른 액상 첨가제들의 분진 농도에 대한 경시적 저감 효과가 관찰되지 않았다. 5. 평가대상 모든 액상 첨가제들 중 콩기름의 살포가 제거 효율성 및 안전성 측면 모두 돈사 분진 제어에 대해 가장 효과적인 첨가제였다.

• Toxicological Research
• /
• 제8권1호
• /
• pp.144-156
• /
• 1992

The residue of drug in foods of animal origin has increasingly become of interest to the entire livestock industry as growing consumer health concerns. The current overvie of feed additives and veterinary drugs used in Japan and their residual analysis has been reviewed. High performance liquid chromatographic technique(HPLC) with various detectors can be expected to be successfully applied for the routine analysis of residual feed additives and veterinary drugs including anabolic agents in livestock products.

• Carbon letters
• /
• 제15권3호
• /
• pp.187-191
• /
• 2014

This study reports on the influence of N-butyl-N-methylpyrrolidinium tetrafluoroborate ($PYR_{14}BF_4$) ionic liquid additive on the conducting and interfacial properties of organic solvent based electrolytes against a carbon electrode. We used the mixture of ethylene carbonate/dimethoxyethane (1:1) as an organic solvent electrolyte and tetraethylammonium tetrafluoroborate ($TEABF_4$) as a common salt. Using the $PYR_{14}BF$ ionic liquid as additive produced higher ionic conductivity in the electrolyte and lower interface resistance between carbon and electrolyte, resulting in improved capacitance. The chemical and electrochemical stability of the electrolyte was measured by ionic conductivity meter and linear sweep voltammetry. The electrochemical analysis between electrolyte and carbon electrode was examined by cyclic voltammetry and electrochemical impedance spectroscopy.

• Macromolecular Research
• /
• 제17권11호
• /
• pp.856-862
• /
• 2009

This study examined the effects of liquid and solid additives on the morphological, mechanical and thermal insulating properties of rigid polyurethane foams (PUFs). The PUFs synthesized with tetramethylsilane (TEMS) as a liquid-type additive showed a smaller average cell size and lower thermal conductivity than those with the aerosil 200 and clay 30B as solid-type additives. When TEMS was added, the average cell size of the PUF became more uniform and finer due to the reduced surface tension of the polymer solution, which increased the nucleation rate and number of bubbles produced and reduced cell size. The PUFs with TEMS showed the highest closed cell contents among the PUFs prepared using TEMS, aerosil 200 and clay 30B. This suggests that the insulation properties of PUF can be determined by both the size of the cell structure and the amount of closed cell contents in the system. The compression and flexural strengths of the PUF increased slightly when the aerosil 200, clay 30B and TEMS were added compared those of the neat PUF. The reaction profiles of the PUFs showed a similar gel and tack tree time with the reaction time among the PUFs synthesized with three different additives and neat PUF. This suggests that the nucleating additives used in this study do not affect the bubble growth of the chemical reaction, and the additives may act as nucleating agents during the formation of PUF. From the above results of the cell size, thermal conductivity, closed cell contents and reaction profile of the PUFs, liquid-type nucleating agent, such as TEMS, is more effective in decreasing the thermal conductivity of the PUF than solid-type nucleating agent, such as aerosil 200 and clay 30B.