• The Korean Journal of Community Living Science
• /
• v.23 no.2
• /
• pp.199-206
• /
• 2012

In order to evaluate the aroma compounds in Korean traditional alcoholic beverages, volatile compounds of the commercial wines, Makgeolli were analyzed and quantified using the conventional method. Eight volatile compounds including three kinds of alcohols, two kinds of organic acids and three kinds of ether were extracted by Liquid-Liquid Extraction with Dichloromethane. For the separation and quantification, Gas chromatography coupled with mass spectrometry (GC/MS) was used to analyze these compounds. Also, the separation efficiency of these compounds was performed and compared with GC column. The results of this study were as follows ; Eight kinds of volatile compounds were separated well on the HP-88 column better than on the DB-5MS column. Short chain fatty acids, butyric acid and isovaleric acid were not detected in two brands of makgeolli samples. The higher alcohols were detected in the range of 0.86~225.68 ${\mu}g/mL$ and ethyl esters were detected in the range of 0.86~225.68 ${\mu}g/mL$, respectively. There compounds are known to be associated with sensory and odorant.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.653-659
• /
• 1997

Due to the rising cost of energy, new separation processes based on extraction are becoming more attractive than before. Thus, the need for calculating and predicting liquid-liquid equilibria(LLE) compositions has very much increased. The purpose of this study is to determine the binodal curves, tie line, plait point, distribution and selectivity for the ternary systems of 2-propanol-water with methyl ethyl ketone, methyl isobutyl ketone, ethylacetate, toluene and o-xylene as solvents at $25^{\circ}C$. And those tie line data were used to examine thermodynamic consistency. The experimental tie line data were correlated with NRTL and UNIQUAC models.

• Applied Chemistry for Engineering
• /
• v.5 no.6
• /
• pp.1016-1023
• /
• 1994

In process of manufacturing acrylonitrile azeotrope of acetonitrile-water was come into being as by-product. For the purpose of recovering acetonitrile through solvent extraction process benzene, toluene, o-xylene, ethylacetate and monochlorobenzene as solvents were selected in order to separate acetonitrile from azeotrope of acetonitrile-water. In this study liquid-liquid equilibrium data were determined and consistency of the experimental data was investigated. The tie line and plait point for solvent(1)-water(2)-acetonitrile(3) system were determined at $25^{\circ}C$. The parameters in the NRTL, UNIQUAC and modified UNIQUAC model were predicted, distribution coefficient and selectivity of each solvent were determined respectively.

• YAKHAK HOEJI
• /
• v.36 no.3
• /
• pp.259-268
• /
• 1992

A procedure for the determination of KR-30075 and its metabolites in plasma and urine by high performance liquid chromatography is described. For the study of pharmacokinetic properties of KR-30075, a new PDE III inhibitor, the plasma concentration and urinary excretion after an oral administration of KR-30075 (4 mg/kg) in the male rat (Sprague Dawley) were determined by high performance liquid chromatography. The best extraction efficiency of KR-30075 and KR-30072 is obtained with ethyl ether adjusted to pH 4.0. Retention times of both KR-30072 and KR-30075 were within 5 min and resolution was complete at the flow rate of 1.0 ml/min. The sensitivity and specificity of this HPLC assay appears to be satisfactory for the pharmacokinetic study of KR-30075 and its metabolites. One-compartment open model with first-order absorption was applied to evaluate the pharmacokinetic parameters of KR-30075 according to Minimum AIC Estimation. $T_{max}$ was 1 hr, $C_{max}$ was $0.789{\pm}0.31\;{\mu}g/ml$ and elimination half $T_{1/2}$ was 6.31 min after oral administration of 4 mg/kg KR-30075 to male rats.

• Proceedings of the Korean Society of Applied Pharmacology
• /
• 1998.11a
• /
• pp.123-123
• /
• 1998

A number of uracil derivatives have been developed as anti-AIDS drugs having a mechanism of inhibiting cellular reverse transcriptase. A simple and rapid assay technique for recently synthesized KR-V analogues was developed using a high-performance liquid chromatography, and oral pharmacokinetics was examined for assessing their oral bioavailabilites. Plasma samples were analyzed by reversed-phase HPLC using an ODS column with an ultraviolet detection system. All the analogues were eluted within 12 min and the LOQ was 15-30 ng/$m\ell$. The extraction recoveries were higher than 85%, except KR-V1039, 1068 and 1720 having ester group. This chromatic method was well applied to the kinetic studies for KR-V analogues. Among 16 analogues tested in the present work, the 6 compounds including KR-V1123, 1122, 1784, 1783, 1736 and 1700 were found to be bioavailable for oral administration to rats.

• Mycobiology
• /
• v.41 no.3
• /
• pp.149-154
• /
• 2013

An ${\alpha}$-glucosidase inhibitor was developed from Aspergillus oryzae N159-1, which was screened from traditional fermented Korean foods. The intracellular concentration of the inhibitor reached its highest level when the fungus was cultured in tryptic soy broth medium at $27^{\circ}C$ for five days. The inhibitor was purified using a series of purification steps involving ultrafiltration, Sephadex G-25 gel permeation chromatography, strong cation exchange solid phase extraction, reverse-phase high performance liquid chromatography, and size exclusion chromatography. The final yield of the purification was 1.9%. Results of the liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis indicated that the purified ${\alpha}$-glucosidase inhibitor was a tri-peptide, Pro-Phe-Pro, with the molecular weight of 360.1 Da. The IC50 value of the peptide against ${\alpha}$-glucosidase activity was 3.1 mg/mL. Using Lineweaver-Burk plot analysis, the inhibition pattern indicated that the inhibitor acts as a mixed type inhibitor.

• Food Science of Animal Resources
• /
• v.34 no.6
• /
• pp.749-756
• /
• 2014

A rapid and simple analytical method for L-carnitine was developed for infant and toddler formulas by liquid chromatography tandem mass spectrometry (LC-MS/MS). A 0.3 g of infant formula and toddler formula sample was mixed in a 50 mL conical tube with 9 mL water and 1 mL 0.1 M hydrochloric acid (HCl) to chemical extraction. Then, chloroform was used for removing a lipid fraction. After centrifuged, L-carnitine was separated and quantified using LC-MS/MS with electrospray ionization (ESI) mode. The precursor ion for L-carnitine was m/z 162, and product ions were m/z 103 (quantitative) and m/z 85 (qualitative), respectively. The results for spiked recovery test were in the range of 93.18-95.64% and the result for certified reference material (SRM 1849a) was within the range of the certificated values. This method could be implemented in many laboratories that require time and labor saving.

• Archives of Pharmacal Research
• /
• v.19 no.5
• /
• pp.396-399
• /
• 1996

High-performance liquid chromatographic method with UV detecction was developed for the determination of theophylline and its metabolites in human urine using ${beta}$-hydroxyethyl theophylline$({beta} -HET)$ as an internal standard. For extraction of urine sample, quality control sample and xanthine-free blank urine were mixed with decylamine (ion-paring reagent) and ${beta}$-HET. After saturation with ammonium sulfate, the mixture was then extracted with organic solvent at pH values of 4.0-4.5. All separations were performed with ion-pair chromatography using decylamine as an ion-pairing reagent and 3mM sodium acetate buffered mobile phase (pH 4.0) containing 1% (v/v) acetonitrile and 0.75 mM decylamine. The detection limits of theophylline, 1, 3-DMU, 1-MU, 3-MX and 1-MX in human urine were 0.17, 0.17, 0.39, 0.19 and 0.19 ${\mu}g$/ml, based on a signal-to-noise ratios of 3.0. The mean intraday coefficients of variation (C.V.s) of each compound on nine replicates were lower than 2.0%, while mean interday C.V.s on three days were lower than 1.6%. All separations were finished within 40miutes.

• Bulletin of the Korean Chemical Society
• /
• v.28 no.5
• /
• pp.745-750
• /
• 2007

An isotope dilution-liquid chromatography/tandem mass spectrometric method was developed as a candidate reference method for the accurate determination of folic acid in infant milk formula. Sample was spiked with 13C5-folic acid and then extracted with phosphate buffer (pH 6) solution. The extract was further cleaned up by deproteinization followed by a C18 solid-phase extraction cartridge. The extract was analyzed by using LC/ ESI/MS/MS with selectively monitoring the collisionally induced dissociation channels of m/z 442 → m/z 295 and m/z 447 → m/z 295, which are the neutral glutamyl loss from the [M+H]+ ions of folic acid and 13C5-folic acid, respectively. LC/MS/MS chromatograms showed substantially reduced background from chemical noises compared to LC/MS chromatograms. Repeatability and reproducibility studies showed that the LC/MS/ MS method is a reliable and reproducible method which can provide less than 1.5 relative percentage of method precision.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.10
• /
• pp.2034-2043
• /
• 2002

The process design to produce a near net shape home-appliance compressor component using semi-solid die casting process is performed. In order to obtain a good component without defects such as liquid segregation and porosity, the relationship between pressure and time, and plunger tip displacement and injection velocity are proposed with repeated trial and error. The effect of the velocity variation in the process parameters on liquid segregation and extraction is investigated to produce the aluminum frame part(a kind of compressor part) with good mechanical properties. The mechanical characteristic of semi-solid die casting formed parts for AlSi7Mg0.65r(A357) and AlSi17Cu4Mg(A390) are investigated with a view to minimizing the occurrence of defects. To investigate of application possibility at industry field, A380 aluminum alloy with 8∼9% silicon contents used for the squeeze casting process. The obtained mechanical properties is compared with semi-solid die casting.