• Korean Journal of Environmental Agriculture
• /
• v.39 no.3
• /
• pp.246-252
• /
• 2020

BACKGROUND: Pesticides are broadly used to control weeds and pests, and the residues remaining in crops are managed in accordance with the MRLs (maximum residue limits). Therefore, an analytical method is required to quantify the residues, and we conducted a series of analyses to select and validate the quick and simple analytical method for tolpyralate in five agricultural products using QuEChERS (quick, easy, cheap, effective, rugged and safe) method and LC-MS/MS (liquid chromatography-tandem mass spectrometry). METHODS AND RESULTS: The agricultural samples were extracted with acetonitrile followed by addition of anhydrous magnesium sulfate, sodium chloride, disodium hydrogencitrate sesquihydrate and trisodium citrate dihydrate. After shaking and centrifugation, purification was performed with d-SPE (dispersive-solid phase extraction) sorbents. To validate the optimized method, its selectivity, linearity, LOD (limit of detection), LOQ (limit of quantitation), accuracy, repeatability, and reproducibility from the inter-laboratory analyses were considered. LOQ of the analytical method was 0.01 mg/kg at five agricultural products and the linearity of matrix-matched calibration were good at seven concentration levels, from 0.0025 to 0.25 mg/L (R²≥0.9980). Mean recoveries at three spiking levels (n=5) were in the range of 85.2~112.4% with associated relative standard deviation values less than 6.2%, and the coefficient of variation between the two laboratories was also below 13%. All optimized results were validated according to the criteria ranges requested in the Codex Alimentarius Commission (CAC) and Ministry of Food and Drug Safety (MFDS) guidelines. CONCLUSION: In conclusion, we suggest that the selected and validated method could serve as a basic data for detecting tolpyralate residue in imported and domestic agricultural products.

• Research in Plant Disease
• /
• v.15 no.2
• /
• pp.112-119
• /
• 2009

We discovered two novel phytotoxins produced by the pathogenic fungus, Botrytis cinerea. Among the twenty-five B. cinerea isolates, which were obtained from various host plants in 1994 and 1996, twenty-two showed strong or moderate pathogenicity on five plants such as cucumber, tomato, red pepper, tobacco and Chinese cabbage. The culture filtrate of the B. cinerea 2-16 strain showed the most potent phytotoxic activity in a tobacco leaf-wounding assay. Two novel phytotoxins were isolated from the liquid cultures of B. cinerea 2-16 by ethyl acetate extraction, flash silica gel column chromatography, silica gel column chromatography, Sephadex LH-20 column chromatography, preparative TLC and subsequently preparative HPLC. Their chemical structures were determined to be 3-O-acetyl botcinol and 3-O-acetyl botcinolide, respectively, by mass and NMR spectral analyses. These two phytotoxins caused leaf necrosis in a leaf-wounding bioassay, and significant electrolyte leakage from leaf tissues of tobacco. In the two bioassays tested, 3-O-acetyl botcinol exhibited stronger phytotoxic activity than 3-O-acetyl botcinolide. This is the first report on the production of both 3-O-acetyl botcinol and 3-O-acetyl botcinolide from B. cinerea.

• Journal of Food Hygiene and Safety
• /
• v.32 no.5
• /
• pp.389-395
• /
• 2017

A simultaneous determination of 5 phenolic acids (gallic acid, chlorogenic acid, caffeic acid, pcoumaric acid, trans ferulic acid) and 9 flavonoids (procyanidin b1, aspalathin, rutin, vitexin, hyperoside, isoquercitrin, luteolin, quercetin, chrysoeriol) in rooibos tea has been carried out by ultra-high performance liquid chromatography coupled to tandem mass spectrometry (UPLC-MS/MS). A validated analysis method in this study was applied to rooibos aqueous infusions. Rooibos tea is an antioxidant-rich tea which has anti-cancer, anti-aging, anti-inflammatory, anti-diabetic effect. Extraction yield of phenolics depends on steeping time and temperature of water. Tea infusions were prepared by placing 1 g of tea leaves or 1 tea bag in 100 mL of boiled water, and then at 3, 6 and 30 minutes intervals the infused teas were taken to carry out the analysis of phenolic contents. Another tea infusion was conducted with cold water ($25-30^{\circ}C$) for 30 minuntes. As a result, the total amount of phenolics was highest in rooibos tea steeped with hot water for 30 minutes, followed by 6 minutes, 3 minutes and cold water 30minutes and the result has statistical significance.

• Applied Chemistry for Engineering
• /
• v.24 no.1
• /
• pp.10-17
• /
• 2013

Heavy oil residue upgrading process was being used in conventional refinery process. Recently, as the importance of non conventional energy development is growing up, the commercial projects of heavy oil upgrading are getting more active than before. For having competitive business model in the resource competition, non conventional energy development should be considered as an important business strategy. In developing oil sands, extra heavy oil, and shale gas, canadian oil sands and extra heavy oil have great importance in substitution of conventional oil consumption. In oil sands development, the bitumen, which is extracted from oil sands, has great value after upgrading or refining process. Similar process is being used current conventional refinery process. The bitumen is highly viscous hydrocarbon. This bitumen includes impurities which can not be treated in conventional refinery process. As this reason, specified process is needed in bitumen or extra heavy oil upgrading process. Moreover, there will be additional specified facilities in the process of production, transportation and marketing. In oil sands, there are various kinds of commercial upgrading process. Extraction, dilution, coking and cracking method were being used commercially.

• Korean Journal of Food Science and Technology
• /
• v.43 no.3
• /
• pp.277-281
• /
• 2011

A rapid and very sensitive high-performance liquid chromatography/atmospheric-pressure chemical-ionization mass spectrometry method to detect ethylenethiourea (ETU) fungicide residues in fruits was developed. Methylene chloride was used as the surface extraction solvent for the target component. Recovery rates improved when cysteine hydrochloride and sodium carbonate were added to product prior to fortification. The limits of detection and quantification were approximately 0.006 and 0.02 mg/kg, respectively, from mandarin oranges. Recoveries from mandarin oranges, oranges, bananas, and pears, spiked in the range of 0.05-0.5 mg/kg, averaged 80-100%. The proposed method was used to monitor the presence of ETU in commercial fruits purchased from different markets in Seoul, Korea. ETU was found in four orange peels and in three mandarin orange peel samples. The highest ETU residue levels were $73.6{\mu}g/kg$ and $29.8{\mu}g/kg$.

• Korean Journal of Environmental Agriculture
• /
• v.39 no.2
• /
• pp.130-137
• /
• 2020

BACKGROUND: Mefentrifluconazole and triticonazole are the triazole fungicides. The maximum residue levels for agricultural products need to be set up. Therefore, development of the official analytical method for determination of mefentrifluconazole and triticonazole residues from agricultural crops was necessary due to safety management, and then a simultaneous analytical method was developed for the determination of mefentrifluconazole and triticonazole in agricultural crops. METHODS AND RESULTS: Samples were extracted using acetonitrile and purified using dispersive solid phase extraction, and then detected with liquid chromatograph-tandem mass spectrometry (LC-MS/MS). Matrix-matched calibration curves (0.0025-0.25 ㎍/mL) were linear into a sample extract with r²>0.99. For validation, the recovery test was carried out at three fortification levels (LOQ, 10 LOQ and 50 LOQ) from agricultural samples. The results for mefentrifluconazole and triticonazole ranged between 92.3 to 115.3% and 91.4 to 108.5%, respectively and RSD (relative standard deviation) values were also below 6.0%. Furthermore, inter-laboratory was conducted to validate the method. CONCLUSION: All values were corresponded with the criteria ranges requested by both the CODEX (CAC/GL 40-1993, 2003) and MFDS guidelines (2016). Therefore, the proposed method can be used as an official analytical method for determination of mefentrifluconazole and triticonazole (triazole fungicides) in the Republic of Korea.

• Journal of Food Hygiene and Safety
• /
• v.35 no.4
• /
• pp.312-318
• /
• 2020

A method using liquid chromatography-tandem mass spectrometry (LC-MS/MS) was developed for neonicotinoid pesticide analysis in agricultural products. Four compounds (imidacloprid, clothianidin, acetamiprid, thiacloprid) were extracted with acetonitrile from agricultural products and cleaned up by NH₂ solid-phase extraction procedure, and eluted with 0.1% formic acid in methanol/dichloromethane (5/95, v/v). The limit of detection and quantification were 0.0001-0.0005 mg/kg and 0.001 mg/kg, respectively. The mean recoveries of neonicotinoid pesticide from agricultural products were in the range of 90.7-100.9% and 94.4-99.8%, as spiked at 0.2 mg/kg and 0.02 mg/kg, respectively. This validation satisfied the national criteria for pesticide analytical methods. In summary, The present method is fast, precise and sensitive enough for the Positive List System (PLS), and we conclude that the method is also suitable for neonicotinoid pesticide determination in a wide range of agricultural products.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.6C
• /
• pp.349-354
• /
• 2011

Passive millimeter wave imaging has the capability of detecting concealed objects under clothing. Also, passive millimeter imaging can obtain interpretable images under low visibility conditions like rain, fog, smoke, and dust. However, the image quality is often degraded due to low spatial resolution, low signal level, and low temperature resolution. This paper addresses image registration and fusion between passive millimeter images and visual images. The goal of this study is to combine and visualize two different types of information together: human subject's identity and concealed objects. The image registration process is composed of body boundary detection and an affine transform maximizing cross-correlation coefficients of two edge images. The image fusion process comprises three stages: discrete wavelet transform for image decomposition, a fusion rule for merging the coefficients, and the inverse transform for image synthesis. In the experiments, various types of metallic and non-metallic objects such as a knife, gel or liquid type beauty aids and a phone are detected by passive millimeter wave imaging. The registration and fusion process can visualize the meaningful information from two different types of sensors.

• The Korean Journal of Mycology
• /
• v.37 no.1
• /
• pp.96-103
• /
• 2009

For the control of pathogenic microorganisms, Bacillus spp. were isolated from diseased pepper fruits in Korea. Among them, Bacillus sp. IUB158-03 showed high inhibitory effect on mycelial growth and spore germination of C. gloeosporioides and Botrytis cinerea. The strain was identified as B. amyloliquefaciens IUB158-03 based on its physiological, biochemical characteristics and Microlog analysis. The highest level of antifungal substances by B. amyloliquefaciens IUB158-03 were obtained when the bacterium was cultured in medium containing 2% soluble starch, 3% yeast extract, 0.5% tryptone, 0.5% $NH_4H_2PO_4$, and 1% NaCl (pH 6.0) at $25^{\circ}C$ for 72 hrs. The antifungal substances were purified by butanol extraction, silica gel column chromatography, preparative thin layer chromatography, and high performance liquid chromatography. The purified antifungal substance was confirmed $R_f$ 0.27 by TLC. This substance exhibited antifungal activity against Fusarium solani, Rhizoctonia solani, Botrytis cineria, Alternata alternaria of plant pathogenic fungi and Trichophyton mentagrophytes, Epidermophyton floccosum, Cryptococcus neoformans of human pathogenic fungi.

• Polymer(Korea)
• /
• v.38 no.5
• /
• pp.656-663
• /
• 2014

Atorvastatin calcium-loaded polyoxalate (POX) microspheres were prepared by an emulsion solvent-evaporation/ extraction method of oil-in-oil-in-water ($O_1/O_2/W$) for sustained release. We investigated the release behavior according to initial drug ratio, molecular weight ($M_w$) and concentration of POX and concentration of emulsifier. The microsphere was characterized on the surface, the cross-section morphology and the behavior of atorvastatin calcium release for 10 days by scanning electron microscopy (SEM) and high performance liquid chromatography (HPLC). The analysis of crystallization was analyzed to use X-ray diffraction (XRD), differential scanning calorimeter (DSC) and Fourier transform infrared (FTIR). These results showed that the release behaviors can be controlled by preparation conditions.