• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2001.11a
• /
• pp.65-72
• /
• 2001

Power system stabilizer act efficiently to damp the electromechanical oscillations in interconnected power systems. This paper presents an algorithm for the optimal parameter selection of a power system stabilizer in two-area power systems with a series HVDC link. This method is one of the classical techniques by allocating properly pole-zero positions to fit as closely as desired the ideal phase lead between the voltage reference and the generator electrical power and by changing the gain to produce a necessary damping torque over the matched frequency range. Control of HVDC converter and inverter are used a constant current loop. Proper parameters of PI controllers are obtain based on the Root-locus technique in other to have sufficient speed and stability margin to cope with charging reference values and disturbance. The small signal stability arid transient stability studies using the PSS parameters obtained from this method show that a natural oscillation frequency of the studycase system is adequately damped. Also the simulation results using the HVDC converter and inverter parameters obtained from this proposed method show proper current control characteristics. The simulation used in the paper was performed by the Power System Toolbox software program based on MATLAB.

• Wind and Structures
• /
• v.23 no.4
• /
• pp.301-311
• /
• 2016

The numerous benefits of Savonius turbine such as simple in structure, has appropriate self-start ability, relatively low operating velocity, water acceptance from any direction and low environmental impact have generated interests among researchers. However, it suffers from a lower efficiency compared to other types of water turbine. To improve its performance, parameters such flow pattern, pressure and velocity in different conditions must be analyzed. For this purpose, a detailed description on the flow field of various types of Savonius rotors is required. This article presents a numerical study on a nonlinear two-dimensional flow over a classic Savonius type rotor and a Benesh type rotor. In this experiment, sliding mesh was used for solving the motion of the bucket. The unsteady Reynolds averaged Navier-Stokes equations were solved for velocity and pressure coupling by using the SIMPLE (Semi-Implicit Method for Pressure linked Equations) algorithm. Other than that, the turbulence model using $k-{\varepsilon}$ standard obtained good results. This simulation demonstrated the method of the flow field characteristics, the behavior of velocity vectors and pressure distribution contours in and around the areas of the bucket.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.37-40
• /
• 1999

ETRI has successfully completed and delivered to KARI the KOMPSAT Mission Control System. This system was designed to work in the conventional TT&C modulation scheme with the pre-assigned frequencies. As a way to accelerate in catching up with future TT&C technology evolutions, a preliminary study needs to be carried out to prepare for the development of a spread spectrum applicable to TT&C. A brief study was carried out to review some points to be considered in designing and implementing spread spectrum schemes to the ground TT&C system intended for a LEO spacecraft. Also a simulation and link design revisit was performed to see the operational and technical benefits with the KOMPSAT TT&C parameters. An experiment concept is proposed to test as many functions at a time once the prototype is developed. In this configuration, a ground-model TT&C transponder is connected via LAN to the ETRI-developed KOMPSAT S/W simulator and linked to the KOMPSAT TM/TC processing s/w via spread spectrum signals through a GEO satellite bent-pipe link. A satellite data relay link simulation could be carried out in this configuration.

• Journal of Korean Society on Water Environment
• /
• v.25 no.3
• /
• pp.432-440
• /
• 2009

The effect of selecting hydrologic item for calculating objective function on calibration of stream flow was evaluated by Hydrologic Simulation Porgram-Fortran (HSPF) linked with Model Independent Parameter Optimizer (PEST). Daily and monthly stream flow and flow duration were used to calculate objective function. Automated calibration focused on monthly stream was proper to analyze seasonal or yearly water budget but not proper to predict daily stream flow or percent chance flow exceeded. Calibration result focused on flow duration is proper to predict precent chance flow exceeded but not proper to analyze water budget or predict peak flow. These results indicate that hydrologic item calculated for objective function on calibration procedure could influence calibration results and watershed modeler should select carefully hydrologic item for the purpose of model application. Current, the criteria of stream flow of Korean TMDL is generated based on percent chance flow exceeded, so flow duration should be included to calculate objective function on calibration procedure for the estimation of criteria of stream flow using hydrologic model.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.700-705
• /
• 2006

The latest system of GIS has been changing from 2 dimension to 3 dimension. According to the rapid growth of the fields linked to 3D GIS, 3D GIS has variously affected the public field, the national defense field. and the industrial field. This study estimated sight distance safety of curve section considering the environmental impact based on 3D GIS. Sight distance is calculated from the relation between road which keeps the three-dimension character and driver gaze, so it needs to consider both plane and vertical for the accurate measuring. This study made analysis of the sight distance through considering the environmental impact with driving simulation of design speed 80km/h and running speed 60-120km/h.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2006.11a
• /
• pp.571-573
• /
• 2006

This study suggests a reasonable method for visualizing risk management level by risk weight linked with 4D model. This study defines risk management procedures as preparation, identification, analysis, response and management to manage potential risks in the construction project. The modules for computerizing in this system consist of planning, construction, application of WBS (Work Breakdown Structure) and RBS (Risk Breakdown Structure), and risk analysis. The final results include a method for visualizing risk level by each element of the project by using 4D simulation technique. It can be used as a visualized risk management tool instead of current system using numerical data.

• Proceedings of the KSRS Conference
• /
• 2007.10a
• /
• pp.134-137
• /
• 2007

In this paper the heat health alert system, which is operated this year by way of showing an example, is a simulator linked to the Geographic Information System (GIS), and it uses meteorological data that are observed at Automatic Weather Systems (AWSs) in Seoul, Korea. Simulation results show that it is possible to use meteorological data observed by AWSs when the Korea Meteorological Administration (KMA) has issued alerting the public to the threat of heat waves, and to connect meteorological data to spatial data when the KMA offers local forecasts and weather-related information. However, most AWSs that were installed to manage urban disasters do not measure humidity, so general humidity is used in all districts. Therefore, to issue heat wave warnings about different localities on a small scale, we will study how to complement this problem and to examine the accuracy of data observed at AWS in the future.

• Korean System Dynamics Review
• /
• v.15 no.3
• /
• pp.5-36
• /
• 2014

The purpose of this paper is to develop a System Dynamics model for estimating the volume of forest resources in the future and simulating the volume of function of public benefit linked to forest resources in dynamic manner. Also it is to analyze the impact when the volume of forest land conversion is controlled by policy using the SD model. The analysis was done at nation-wide for the simulation period 2000 to 2040. Estimated forest area was 6.2 million ha and estimated growing stock was $4.7\;billion\;m^3$ in 2040 from the future forecast without policies. Changing of forest resources, 13.9 billion tons of forest-ground-water storage was estimated, $1.8\;million\;m^3$ of erosion control of forest was estimated and 377 million tons of $CO_2$ absorption was estimated. As a result of simulation with two alternatives, forest area was less reduced and growing stock was bigger than do nothing policy. Also, function of public benefit reflected by changes of forest resources was enhanced. This study contributes to estimate the quantitatively measured volume of forest resources and function of public benefit over the 30 years in Korean forest land in scientific way. Using this SD model, decision maker would develop forest land policies more delicately for deserving forest resources and increasing the volume of function of public.

• Journal of the Korea Society for Simulation
• /
• v.20 no.1
• /
• pp.29-37
• /
• 2011

Cookie file can be properly protected by designing security zone to enhance the safety of cookie file vulnerable to cyber attacks. In this paper, the model, in which cookie file is stored in the security area and the current visiting page is closely linked with cookie, is proposed to help users utilize in the same existing way, as well as enhance the security of user cookie files. Even if attacker tries to compromise web browser's cookie folder, the security of other cookies can be preserved. It is possible since the folder has the only cookie for the current web page where user is visiting.

• International Journal of Control, Automation, and Systems
• /
• v.6 no.2
• /
• pp.243-252
• /
• 2008

It has been reported that long-term exercise on a treadmill (running machine) may cause injury to the joints in a human's lower extremities. Previous works related to analysis of human walking motion are, however, mostly based on clinical statistics and experimental methodology. This paper proposes an analytical methodology. Specifically, this work deals with a comparison of normal walking on the ground and walking on a treadmill in regard to the external and internal impulses exerted on the joints of a human's lower extremities. First, a modeling procedure of impulses, impulse geometry, and impulse measure for the human lower extremity model will be briefly introduced and a new impulse measure for analysis of internal impulse is developed. Based on these analytical tools, we analyze the external and internal impulses through a planar 7-linked human lower extremity model. It is shown through simulation that the human walking on a treadmill exhibits greater internal impulses on the knee and ankle joints of the supporting leg when compared to that on the ground. In order to corroborate the effectiveness of the proposed methodology, a force platform was developed to measure the external impulses exerted on the ground for the cases of the normal walking and walking on the treadmill. It is shown that the experimental results correspond well to the simulation results.