• Journal of Digital Contents Society
• /
• v.19 no.1
• /
• pp.67-73
• /
• 2018

Researchers have increased their interest in effectively managing the disaster that appear in large scale and complex form. There are two types of disaster information, which are unstructured text data and structured data. Unstructured text data usually refers to text documents that have been referenced by disaster management personnel such as disaster manuals and related regulations, while structured data refers to various disaster information build in the disaster related organization system. This paper proposes a methodology of constructing a disaster information sharing system that enables joint use of disaster related organizations through the establishment of a mutual linkage system by utilizing both unstructured and structured form of disaster information. Especially, Based on the linkage information between structured earthquake information in earthquake related system and earthquake manuals and countermeasures against earthquake disaster, we propose a service that provides the necessary information for earthquake management. It is expected that the task manager will perform effective earthquake state management by acquiring the integrated structured and unstructured earthquake information of the ministries and related organizations.

• Korean Journal of Food Science and Technology
• /
• v.31 no.3
• /
• pp.600-605
• /
• 1999

Methyl linoleate was oxidized at 60, 90, 120 and $150^{\circ}C$, respectively, with sparging oxygen for different periods of time. On the basis of the peroxide values determined at four temperatures, four heating times were chosen for the analysis of physicochemical parameters, such as peroxide value, total oxidation products, polymer content, viscosity, refractive index and characteristics of thermal degradation by DSC (Differential Scanning Calorimeter). The content of peroxide linkage (C-O-O-C) polymer and ether or carbon to carbon linkage (C-O-C/C-C) polymer were analyzed by High Performance Size Exclusion Chromatography (HPSEC). The polymer formed at four temperatures was qualitatively identified as dimer. The polymer with peroxide linkage (C-O-O-C) were detected from methyl linoleate oxidized at $60^{\circ}C\;and\;90^{\circ}C$, but they were not detected from methyl linoleate oxidized at $120^{\circ}C\;and\;150^{\circ}C$. The enthalpy changes increased as peroxide value increased whereas maximum degradation temperature decreased. The highest correlation coefficients were obtained between maximum degradation temperature $(T_m)$, exothermic enthalpy changes and peroxide value, peroxide linkage (C-O-O-C) polymer content.

• Applied Chemistry for Engineering
• /
• v.26 no.4
• /
• pp.445-451
• /
• 2015

Semi-flexible liquid crystalline polymers containing a mesogenic group and an octamethylene flexible spacer in the main chain were synthesized by solution polycondensation. The mesogenic group in the polymer consists of four aromatic rings connected by ester and ketone, ether, sulfide, methylene, sulfone, or isopropylidene linkage groups. This paper discusses effects of the central linker of the mesogenic group on polymer properties. The structures and properties of synthesized polymers were investigated by $^1H$-NMR, FT-IR, differential scanning calorimeter (DSC), thermogravimetric analyzer (TGA), X-ray diffractometer (XRD), and polarizing optical microscope (POM). Polymers having bent linkage groups exhibited low thermal transition temperatures, narrow mesophase temperature ranges, low liquid crystallinity, and good solubilities in organic solvents, while those having bulky linkage groups were amorphous and exhibited high glass transition temperatures.

• Toxicological Research
• /
• v.24 no.1
• /
• pp.69-78
• /
• 2008

Mutant mouse which show dwarfism has been developed by N-ethyl-N-nitrosourea (ENU) mutagenesis using BALB/c mice. The mutant mouse was inherited as autosomal recessive trait and named Small Body Size (SBS) mouse. The phenotype of SBS mouse was not apparent at birth, but it was possible to distinguish mutant phenotype from normal mice 1 week after birth. In this study, we examined body weight changes and bone mineral density (BMD), and we also carried out genetic linkage analysis to map the causative gene(s) of SBS mouse. Body weight changes were observed from birth to 14 weeks of age in both affected (n = 30) and normal mice (n = 24). BMD was examined in each five SBS and normal mice between 3 and 6 weeks of age, respectively. For the linkage analysis, we produced backcross progeny [(SBS${\times}$C57BL/6J) $F_1{\times}$ SBS] $N_2$ mice (n = 142), and seventy-four microsatellite markers were used for primary linkage analysis. Body weight of affected mice was consistently lower than that of the normal mice, and was 43.7% less than that of normal mice at 3 weeks of age (P < 0.001). As compared with normal mice at 3 and 6 weeks of age, BMD of the SBS mice was significantly low. The results showed 15.5% and 14.1 % lower in total body BMD, 15.3% and 8.7% lower in forearm BMD, and 29.7% and 20.1% lower in femur BMD, respectively. The causative gene was mapped on chromosome 10. The map order and the distance between markers were D10Mit248 - 2.1 cM - D10Mit51 - 4.2 cM - sbs - 0.7 cM - D10Mit283 - 1.4cM - D10Mit106 - 11.2cM - D10Mit170.

• Korean Journal of Food Science and Technology
• /
• v.28 no.3
• /
• pp.446-450
• /
• 1996

To investigate the effect of heating conditions on the polymerization of methyl linoleate, the esters were heated at $60^{\circ}C,\;90^{\circ}C,\;120^{\circ}C$ and $150^{\circ}C$, respectively, with sparging oxygen for different periods of time. On the basis of the peroxide curve obtained at each of the four temperatures, four heating times were chosen for the analysis of the polymers and total oxidation products. Significant linear relationships were found between polymer contents and total oxidation product contents. The contents of polymers and their linkage types were analyzed by High Performance Size Exclusion Chromatography. The polymers formed at four temperatures were qualitatively identified as dimers. The dimers with peroxide linkages were detected from methyl linoleate oxidized at $60^{\circ}C\;and\;90^{\circ}C$ but they were not detected from methyl linoleate oxidized at $120^{\circ}C\;and\;150^{\circ}C$. Therefore, all dimers formed at $120^{\circ}C\;and\;150^{\circ}C$ seemed to be the ones with ether linkage or carbon to carbon linkage. The degradation rate of the dimers with peroxide linkages at $90^{\circ}C$ was faster than at $60^{\circ}C$.

• Journal of applied mathematics & informatics
• /
• v.26 no.3_4
• /
• pp.493-500
• /
• 2008

In this paper, we first construct a mathematical model for tagSNP selection based on LD measure $r^2$, then aiming at this kind of model, we develop an efficient algorithm, which is called approximate greedy algorithm. This algorithm is able to make up the disadvantage of the greedy algorithm for tagSNP selection. The key improvement of our approximate algorithm over greedy algorithm lies in that it adds local replacement(or local search) into the greedy search, tagSNP is replaced with the other SNP having greater similarity degree with it, and the local replacement is performed several times for a tagSNP so that it can improve the tagSNP set of the local precinct, thereby improve tagSNP set of whole precinct. The computational results prove that our approximate greedy algorithm can always find more efficient solutions than greedy algorithm, and improve the tagSNP set of whole precinct indeed.

• Journal of the Korean Society for Precision Engineering
• /
• v.28 no.7
• /
• pp.851-858
• /
• 2011

Nanopositioning technologies play an important role in the progress of electronics, optics, bio-engineering and various nano-scale technologies. As a result, various practical nanopositioning methods have been successfully introduced. Flexure mechanism is a valuable method in nanopositioning because of smooth and friction-free motion and the infinitesimal movement near to sub-nm. In this study a modularized nanopositioner based on parallelogram four-bar linkage structure with right-circular flexure hinge was developed. The positioning performance of a single axis nanopositioner and a XY nanopositioner which was extended from single axis one were demonstrated using control experiments. Consequently, it was shown that the developed single axis nanopositioner possessed high performance and could be extended to various multi-axis nanopositioners.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.862-863
• /
• 2015

This paper presents an improved estimation procedure for the contribution to no-load flux linkage created by the permanent magnet (PM) in interior permanent magnet synchronous machines. In the proposed method, the saturation effect in stator and rotor cores are taken into account by utilizing the frozen permeability method (FPM). This improved procedure can evaluate the contribution for each local element in the PM to the no-load flux linkage. According to the analysis results, an effective PM topology optimal design can be carried out to achieve high utilization ratio of PM in the machine. In order to determine the threshold of the low contribution of PM for removing, one multi-objective optimization model is proposed. Based on the optimal threshold, the final optimal topology design of PM can be achieved.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2001

This paper examines the structural characteristics of fern lignins (deer fern (Blechnum spicant), sword fern (Polystichum munitum) and maidenhair fern (Adiantum pedatum)) by chemical degradation methods of thioacidolysis and nitrobenzene oxidation as well as 13C NMR. Phloroglucinol-HCI staining indicates that the lignins are specifically accumulated at the sclerenchyma cells beneath the epidermis and vascular bundles. The fern lignins consist of only guaiacyl units. Remarkably, the frequency of the -O-4 linkages is extremely low in fern lignins (only 9 to 11 %). Furthermore, the presence of lignin is ambiguous in maidenhair fern, due to very rare amount of -O-4 linkage. Biphenyl (5-5) and 1,2 bis arylpropane (-1) are main condensed dimeric substructures in fern lignins over 70%. In addition, 13C NMR analysis strongly evidenced the integration of phenolics or their derivatives into the fern lignins.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.110-117
• /
• 2021

The purpose of the study is to develop effective teaching methods to strengthen the major learning capabilities of electronic engineering learners through inquiry learning using computing thinking ability. To this end, first, in the electronic engineering curriculum, we performed teaching-learning through an inquiry and learning model related to mathematics, probability, and statistics under the theme of various majors in electronic engineering, focusing on understanding computing thinking skills. Second, an efficient electronic engineering subject inquiry class operation using computing thinking ability was conducted, and electronic engineering-linked education contents based on the components of computer thinking were presented. Third, by conducting a case study on inquiry-style teaching using computing thinking skills in the electronic engineering curriculum, we identified the validity of the teaching method to strengthen major competency. In order to prepare for the 4th Industrial Revolution, by implementing mathematics, probability, statistics-related linkage, and convergence education to foster convergent talent, we tried to present effective electronic engineering major competency enhancement measures and cope with innovative technological changes.