• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.428-439
• /
• 2015

In this study, we present an approach for reducing the information inaccuracy of existing star aggregation based on bypass links when there are multi-constraint QoS parameters in asymmetric networks. In our approach, bypass links with low similarity are selected. Links that are not chosen as bypass links are included in each group depending on the star's link characteristics. Moreover, each link group is aggregated differently according to the similarity of the links that make up the group. The selection of a bypass link by using link similarity reduces the existing time complexity of O($N^3$) to O(N) by virtue of the simplification of the selection process. In addition, the adaptive integration according to the characteristics of the links in each group is designed to reduce the information inaccuracy caused by static aggregation. Simulation results show that the proposed method maintains low information distortion; specifically, it is 3.8 times lower than that of the existing method, even when the number of nodes in a network increases.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.9
• /
• pp.46-53
• /
• 2007

The link-fault recovery in the normal Ethernet bridged networks has relied on the Spanning Tree Protocol(STP) or Rapid STP. However, STP can not offer fast error recovery which is needed real-time services such as aircraft. In this paper, we compare automatic protection switching(APS) providing fault-tolerant function in the BcN back bone system with Avionic Full Duplex Switched Ethernet(AFDX) which is recently equipped in the A380 for Airbone Databuses. Also, we propose a link-bypass scheme for improving fault-tolerant performance of the AFDX by connecting switches and bypass fault section when a fault is originated on the link. For comparing and verifying the performance of proposed scheme, we simulated Ethernet, AFDX, APS and proposed AFDX with link-bypass scheme using NS-2. The proposed AFDX with link-bypass scheme can be applied to aircrafts, BcN backbone networks and industrial automatic networks.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.34S no.8
• /
• pp.45-55
• /
• 1997

To design a ATM Switch which ahs advantages in high sped packet switching, it is essential to set multiple paths between input ports and output ports and to design a new packet transfer technique on that paths for decreasing Packet Loss by conflicts in internal Switch Plane. We propose new packet transfer method, Alternate Path Transfer Mechanism by Dynamic Bypass Transfer Method which can solve conflict problem in Banyan network easily. Proposed ATM Switch consists of Banyan networks, Input/Ouput Port, Bypass Link, and Bypass Link Controller. Packets caused conflicts in SEs have another chances of packet transfer over alternate switching planes by using this mechanism.

• Journal of Information Processing Systems
• /
• v.15 no.1
• /
• pp.100-115
• /
• 2019

Malicious code distribution on the Internet is one of the most critical Internet-based threats and distribution technology has evolved to bypass detection systems. As a new defense against the detection bypass technology of malicious attackers, this study proposes the automated tracing of malicious websites in a malware distribution network (MDN). The proposed technology extracts automated links and classifies websites into malicious and normal websites based on link structure. Even if attackers use a new distribution technology, website classification is possible as long as the connections are established through automated links. The use of a real web-browser and proxy server enables an adequate response to attackers' perception of analysis environments and evasion technology and prevents analysis environments from being infected by malicious code. The validity and accuracy of the proposed method for classification are verified using 20,000 links, 10,000 each from normal and malicious websites.

• KIISE Transactions on Computing Practices
• /
• v.20 no.12
• /
• pp.694-699
• /
• 2014

In mobile ad-hoc networks (MANET), the network topology and neighboring nodes change frequently, since MANET is composed of nodes that have mobility without a fixed network infrastructure. The AODV routing protocol is advantageous for MANET, but AODV has a delay in the transmission of data packets because AODV can not transmit data during route recovery. This paper proposes solving the above problem of AODV by using a bypass generation mechanism for data transmission during route recovery. For further improvement, additional mechanisms that coordinate the reception threshold of a hello packet are proposed in order to improve the accuracy of the information obtained from the neighboring nodes when the bypass is generated due to a link failure and the immediacy of the route recovery. Simulation results show that the proposed technique improves the performance in terms of the delay in transmission compared to traditional AODV.

• Journal of Digital Contents Society
• /
• v.14 no.4
• /
• pp.429-437
• /
• 2013

Recently, wireless mesh network has been focused as a core technology for resolving the issues of shadow zone and distributed bypass route as it has broad service coverage as well as good scalability features. It, however, provides users with relatively lower QoS than infrastructure-based networks. In order for addressing this QoS issue and also enhancing the routing performance of mobile WiMax mesh network, this paper proposes a load sensing QoS routing (LSQR) scheme. In the proposed LSQR, each node figures out network congestion status and selects a bypass route accordingly. With this scheme, we can expect good load balancing effect by changing the routing paths from centralized links to distributed links under a heavy traffic condition. From the simulation results using NS-2, it has been verified that the LSQR shows lower packet loss rates and data transmission delays than the existing representative routing schemes.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.63 no.4
• /
• pp.361-367
• /
• 2014

This paper is related to a new solar power conditioner for a built-in step-up chopper function. In the first step-up chopper proposed solar PV power conditioner for mutually connected in series with the input voltage of the bypass diodes are respectively connected to the positive terminal should install the mutual boosting chopper diode connected in series with the boost chopper switching element between the two power supply and at the same time the first and the second was connected to a second diode and a resonance inductor and a snubber capacitor in series with each other. And the common connection point between the bypass diode and the step-up chopper and the step-up chopper diode common connection point of the switching elements of the input voltage was set to the boost inductor for storing energy. In addition, between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point of the first auxiliary diode and the second common connection point of the auxiliary diode was provided, the resonance capacitor. Between the step-up chopper and the step-up chopper diode and a switching element of a joint connection point and the common connection point of the resonance inductor snubber capacitor and connecting the third secondary diode, between two power supply lines is characterized by configuring the DC link capacitor bus lines in parallel. Therefore, it is possible to suppress the switching loss through, DC link bus lines, as well as there could seek miniaturization and weight reduction of the power conditioner itself by using a common capacitor of the non-polar non-polar electrolytic capacitor having a capacitor, the service life of the circuit can be extended and it is possible to greatly reduce the loss can be greatly improve the reliability of the product and the operation of the product itself.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.10A
• /
• pp.796-806
• /
• 2003

Mobile Node usually communicate with CN bia only it's own HA but Nested Mobile Networks correspond with CN bia all HA involved with them. when Mobile Network of a MR moves from its home link to a foreign link in the stationary network. then Mobile Network of another MR moves from its home link in stationary network to foreign link in previous mobile network. CN send Packet destined to the latter MR via both Home Agent of the former MR and the latter MR. There are two problem in this scenario. One is inefficient routing path that bypass via several HA. the other is waste of transmission resource and delay of Registration process which change of Nested Mobile Network Architecture cause Mobile Router. so We propose MRA(Mobile Relay Agent) to support effective routing by local mobility management.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.1
• /
• pp.195-204
• /
• 2015

In this paper, the development of a cost-effective active power filter/uninterruptible power supply (APF/UPS) system with seamless mode transfer is described. The proposed scheme employs a pulse-width-modulation (PWM) voltage-source inverter and has two operational modes. First, when the source voltage is normal, the system operates as an APF, which compensates for the harmonics and power factor while boosting the DC-link voltage to be ready for the disturbance, without an additional DC charging circuit. A simple algorithm to detect the load current harmonics is also proposed. Second, when the source voltage is out of the normal range (owing to sag, swell, or outage), it operates a UPS, which controls the output voltage constantly by discharging the DC-link capacitor. Furthermore, a seamless transfer method for the single-phase inverter between the APF mode and the UPS mode is also proposed, in which an IGBT switch with diodes is used as a static bypass switch. Dissimilar to a conventional SCR switch, the IGBT switch can implement a seamless mode transfer. During the UPS operation, when the source voltage returns to the normal range, the system operates as an APF. The proposed system has good transient and steady-state response characteristics. The APF, charging circuit, and UPS systems are implemented in one inverter system. Finally, the validity of the proposed scheme is investigated with simulated and experimental results for a prototype APF/UPS system rated at 3 kVA.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.47-50
• /
• 1998

In recent years, it is required that computing support mobile user with computer. The advantage of mobile computing is that users may access all their applications from any location, whether they are in another building or a different state. So, Internet combines with mobile computing technology to make new communication environment for supporting mobility. The research for solving the problem of mobility is actively in progress. This paper describes the implementation of tunneling method for flexible bypass between specific region. Tunneling method provide mobile service to mobile hosts. IP datagram's address tranform method is IP-within-IP encapsulation by which an IP datagram may be encapsulated within an IP datagram. The developed IP-within-IP protocol can provide not only enhanced performance because it is implemented in kernel mode, but also convenience of usage to the application developers because it gives user interface as a dynamic link library. Verification of IP packet tunneling was text file transfer program.