• Title/Summary/Keyword: Link level factors

Search Result 105, Processing Time 0.027 seconds

A Study on Estimation and Factors of VHF Data Link Range (VHF 데이터통신 통달거리 예측 및 요소 분석)

  • Lee, Young-Joong;Kim, In-Seon;Park, Joo-Rae
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.13 no.3
    • /
    • pp.413-420
    • /
    • 2010
  • An Estimation of VHF data link range for EW(Electronic Warfare) equipment in the sea environment was studied to predict the data link range between transmitting and receiving station. The theoretical estimation predicts within 3% error with actual measurement of VHF data link range at sea. Data link range factors including refraction and reflection are added in the basic wave propagation equation. The effect of refraction and reflection to the range is analysed with quantity level.

Analysis of Joule-heat Characteristics according to the DC-link Capacitor Film Geometrics (DC-link Capacitor필름 형상에 따른 Joule-heat특성 분석)

  • Jeon, Yong Won;Kim, Young Shin;Jeon, Euy Sik
    • Journal of the Semiconductor & Display Technology
    • /
    • v.19 no.1
    • /
    • pp.42-48
    • /
    • 2020
  • As global warming accelerates, eco-friendly electric cars are being developed to reduce carbon dioxide emissions, and power conversion inverters are used to drive motors. Among inverter components, DC-link capacitor is heated by high current usage, which causes problems such as performance and life-saving of inverter. Although metal cases with good thermal performance have been used to solve this problem, it is difficult to apply them in practice due to insulation problems with other parts. In this paper, the Heat-Generation influence factor of DC-link capacitor is analyzed. Variables on heat-generation are set at 3 levels for film width, inductance, and film thickness. Box-Behnken to 13 tests using the design and minimal deviations, e.g. through the experiment three times by each level. The surface of the film k type by attaching the sensor current is measured temperature. Capacitance was set to a minimum level of 200 ㎌ and had a frequency of 16 kHz with Worst case, ambient temperature of 85℃ and a ripple current of 50 Ams was applied. The temperature at the measurement point was collected in the data logger after sampling at 1 minute intervals for 2 hours after saturation with the ambient temperature. This experiment confirmed that setup factors are correlated with heat-generation.

Traffic analysis and storage allocation in a hierarchical two level network for VOD service (2계층 VOD 서비스망에서의 트래픽 분석과 저장용량 결정)

  • 김여근;김재윤;박승현;강성수
    • Proceedings of the Korean Operations and Management Science Society Conference
    • /
    • 1996.04a
    • /
    • pp.89-92
    • /
    • 1996
  • It is generally recognized that Video On Demand (VOD) service will become a promising interactive service in B-ISDN. We consider a hierarchical two level network architecture for VOD service. The first level consists of connected Local Video Servers(LVSs) in which a limited number of high vision programs are stored. The second level has one Central Video Server(CVS) containing all the programs served in the network. The purpose of this paper is to analyze the network traffic and to propose the storage policy for LVSs. For this purpose, we present an analysis of program storage amount in each LVS, transmission traffic volume between LVSs, and link traffic volume between CVS and LVSs, according to changing the related factors such as demand, the number of LVSs is also presented on the basis of the tradeoffs among program storage cost, link traffic cost, and transmission cost.

  • PDF

The Link between Health-related Physical Fitness Level and Cardiovascular Disease-related Risk Factors (건강체력 수준과 심혈관질환 관련 위험인자와의 관련성)

  • Ka, Sung-Soon;Kim, Jung-Soo;Lee, Mi-Young;Kim, Seok-Han;Jeong, Hae-Cheon;Lee, Min-Ki;Lee, Gyu-Seung
    • Korean Journal of Occupational Health Nursing
    • /
    • v.23 no.2
    • /
    • pp.97-105
    • /
    • 2014
  • Purpose: The purpose of this study was to identify the link between health-related physical fitness level and cardiovascular disease-related risk factors in adult male workers. Methods: We tested cardiovascular disease-related risk factors (waist circumference, SBP, DPB, fasting glucose, TC, HDL-C, TG, LDL-C) and health-related physical fitness ($VO_2max$, grip, Sit-up, Flexibility, Body fat) and divided health-related physical fitness level of the subjects into 3 groups - A (very good, n=56), B (good, n=59), and C (below-average, n=57) according to the criterion of the Health and Fitness counseling guidelines of KOSHA. The statistical techniques such as standard deviation, one-way ANOVA and multiple regression (p<.05) were used. Results: There were significant differences between group C and group B & A (p<.001) in waist circumference, DBP, Fasting glucose, HDL-C, TG, LDL-C. In TC/HDL-C, TG/HDL-C, LDL-C/HDL-C, Group C was higher than group B and A. Conclusion: On the basis of these results, we identified that improvement of health-related physical fitness level positively effects on the decrease of cardiovascular disease-related risk factors.

Analysis on the Residential Satisfaction of Individual, Household and Area-Level Characteristics using Multi-Level Models - Focusing on Public Housing in Seoul - (다층모형을 활용한 개인, 가구, 지역차원에서의 주거만족도에 관한 연구 - 서울시 공공임대주택 사례를 중심으로 -)

  • Sung, Jin-Uk;Nam, Jin
    • Journal of Korea Planning Association
    • /
    • v.54 no.4
    • /
    • pp.26-37
    • /
    • 2019
  • It is necessary to implement a wide range of housing welfare policies that citizens can experience in order to improve residents' the quality of life, as it emphasizes the balance of supply and management of public housing. The purpose of this study is to analyze the factors affecting residential satisfaction considering the three hierarchical levels of individual, household, and area. In the background of the study, the individuals' quality-of-life satisfaction determined not only by the individual but also by the various influencing environmental factors. This study targets 1,736 households, 3,239 persons in 464 areas in Seoul. The main research results are as follows. At the level one, there were influencing factors such as age(-), education level and income, and housing area per person, recipient of basic living(-), period(-) and RIR (at the level two). At the level three, west-south region(-) and social mix affect the complex of public housing. In consideration of living infrastructure, the closer to public transportation, public facilities, and medical facilities, the higher the satisfaction of public housing. The results of this analysis suggest that public support needs to focus on individual household members, but there is a need for ways to link it with the complex and the region.

A Case for Using Service Availability to Characterize IP Backbone Topologies

  • Keralapura Ram;Moerschell Adam;Chuah Chen Nee;Iannaccone Gianluca;Bhattacharyya Supratik
    • Journal of Communications and Networks
    • /
    • v.8 no.2
    • /
    • pp.241-252
    • /
    • 2006
  • Traditional service-level agreements (SLAs), defined by average delay or packet loss, often camouflage the instantaneous performance perceived by end-users. We define a set of metrics for service availability to quantify the performance of Internet protocol (IP) backbone networks and capture the impact of routing dynamics on packet forwarding. Given a network topology and its link weights, we propose a novel technique to compute the associated service availability by taking into account transient routing dynamics and operational conditions, such as border gateway protocol (BGP) table size and traffic distributions. Even though there are numerous models for characterizing topologies, none of them provide insights on the expected performance perceived by end customers. Our simulations show that the amount of service disruption experienced by similar networks (i.e., with similar intrinsic properties such as average out-degree or network diameter) could be significantly different, making it imperative to use new metrics for characterizing networks. In the second part of the paper, we derive goodness factors based on service availability viewed from three perspectives: Ingress node (from one node to many destinations), link (traffic traversing a link), and network-wide (across all source-destination pairs). We show how goodness factors can be used in various applications and describe our numerical results.

Effect of Demographic Factors, Radiation Knowledge Level, Radiation Awareness on Radiation Benefit by Hierarchical Regression Analysis Model (위계적 회귀분석 모형에 의한 인구학적 요인, 방사선 지식수준, 방사선 인식도가 방사선 이익성에 미치는 영향)

  • Myeong-Hoon Ji;Youl-Hun Seoung
    • Journal of radiological science and technology
    • /
    • v.46 no.5
    • /
    • pp.435-444
    • /
    • 2023
  • The purpose of this study was to analyze the factors that demographic factors, radiation knowledge level, and radiation awareness could be affecting the benefits of radiation. From July 2022 to July 2023, after receiving consent to participate by using the link of Naver through Social Network Service (SNS) for the general public, 312 people were surveyed by self-registration method without collecting personal information. The questionnaire consisted of a total of 25 questions following demographic factors (5 questions including age group by life cycle, sex, monthly household income, residence), radiation knowledge level (8 questions including basic physical, biological effects, radiation protection technology), radiation awareness (12 questions including risk, management, benefit). Independent sample T-test and ANOVA tests were performed for significant differences in the average radiation awareness between variables, and hierarchical regression was performed to identify influencing factors on radiation benefits. As a result, the benefit of radiation was significantly high among the radiation awareness, but the awareness of the danger of radiation was insufficient to the level of recognizing it as safe. Men had significantly higher awareness of radiation management and benefits than women, and the awareness of radiation management was significantly higher in the middle class with a monthly household income of 4.31 million won or more. The higher the knowledge level of radiation, the higher the awareness of the benefits of radiation. The factors that had a positive effect on radiation benefits were the high level of radiation knowledge and awareness of radiation management.

A $0.18{\mu}m$ CMOS 3.2-Gb/s 4-PAM Serial Link Receiver Using Current Mode Signaling (Current Mode Signaling 방법을 이용한 $0.18{\mu}m$ CMOS 3.2-Gb/s 4-PAM Serial Link Receiver)

  • Lee, Jeong-Jun;Jeong, Ji-Kyung;Burm, Jin-Wook;Jeong, Young-Han
    • Journal of the Institute of Electronics Engineers of Korea SD
    • /
    • v.46 no.10
    • /
    • pp.79-85
    • /
    • 2009
  • The design of a 3.2 Gb/s serial link receiver in $0.18{\mu}m$ CMOS process is presented. The major factors limiting the performance of high-speed links are transmission channel bandwidth, timing uncertainty. The design uses a multi-level signaling(4-PAM) to overcome these problems. Moreover, to increase data bit-rate and lower BER, we designed this circuit by using a current mode amplifier, Current-mode Logic(CML) sampling latches. The 4-PAM receiver achieves 3.2 Gb/s and BER is less than $1.0\;{\times}\;10^{-12}$. The $0.5\;{\times}\;0.6\;mm^2$ chip consumes 49 mA at 3.2 Gb/s from a 1.8-V supply.

A Study on Designing Link Type Percussion Lock (링크식 격발기구 설계에 관한 연구)

  • Lee, Joon-Ho;Yeo, Woon-Joo;Choe, Eui-Jung
    • Journal of the Korea Institute of Military Science and Technology
    • /
    • v.12 no.3
    • /
    • pp.259-265
    • /
    • 2009
  • In the traditional percussion locks of small arms, a firing pin is struck by a hammer rotating on a single center of rotation, which makes the percussion mechanism simple and reliable. In order to strike the firing pin by the hammer, however, the firing pin should be located within the radius of rotation of the hammer. As the distance between the striking point of the firing pin and the center of rotation of the hammer becomes longer, the radius of rotation of the hammer should also be increased, which results in the increase of the volume and weight of the small arms because the hammer needs the more space for its operation inside of the small arms. In this paper, a link type percussion lock was newly proposed in order to overcome the limitation of designing small arms when using traditional percussion locks, as mentioned above. The link type percussion lock was modeled by using multi-body dynamics software and designed to satisfy the requirements such as striking force level of the hammer exerting on the firing pin enough to detonate the percussion cap of ammunitions and the safety on the accidental drop. It was applied to the newly developed dual-barrel weapon system, in which the weight and overall length are important design factors, and verified by durability test and drop test on the ground.

Analysis and Control of NPC-3L Inverter Fed Dual Three-Phase PMSM Drives Considering their Asymmetric Factors

  • Chen, Jian;Wang, Zheng;Wang, Yibo;Cheng, Ming
    • Journal of Power Electronics
    • /
    • v.17 no.6
    • /
    • pp.1500-1511
    • /
    • 2017
  • The purpose of this paper is to study a high-performance control scheme for neutral-point-clamping three-level (NPC-3L) inverter fed dual three-phase permanent magnet synchronous motor (PMSM) drives by considering some asymmetric factors such as the non-identical parameters in phase windings. To implement this, the system model is analyzed for dual three-phase PMSM drives with asymmetric factors based on the vector space decomposition (VSD) principle. Based on the equivalent circuits, PI controllers with feedforward compensation are used in the d-q subspace for regulating torque, where the cut-off frequency of the PI controllers are set at the twice the fundamental frequency for compensating both the additional DC component and the second order component caused by asymmetry. Meanwhile, proportional resonant (PR) controllers are proposed in the x-y subspace for suppressing the possible unbalanced currents in the phase windings. A dual three-phase space vector modulation (DT-SVM) is designed for the drive, and the balancing factor is designed based on the numerical fitting surface for balancing the DC link capacitor voltages. Experimental results are given to demonstrate the validity of the theoretical analysis and the proposed control scheme.