• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.249-252
• /
• 1998

ETSI(European Telecommunications Standards Institute) 300 34701, ITU-T(International Telecommunication Union) G.965 recommended PSTN, CONTROL, LINK CONTROL, BCC, PROTECTION protocols on V-Interfaces. But it is possible to occur misalignment between LE(Local Exchange) and AN(Access Network), especially in link identification procedure because there isn't any comment about V5.2 system management. In this paper we propose S/W guard timer to improve reliability in V5.2 link identification procedure in scope of Recommendation.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1586-1594
• /
• 2011

LED-ID (light emitting diode - identification) technology is the new paradigm in the identification technology environment. LED-ID system typically needs line of sight (LOS) that supports narrow FOV transceivers links to achieve high data rate. On the other hand, narrow FOV reduces the coverage area. Therefore, the number of tags is increased significantly to cover the whole area. In this case number of link switching is increased when the reader moves within whole coverage area. Link switching delay is the important factor for the moving reader to maintain the communication with high data rate and better QoS. In this paper we propose in literature a new link switching scheme and measure the link switching delay time for LED-ID system. The simulation results show that the proposed link switching scheme is a possible candidate for multi-tag LED-ID system.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.11B
• /
• pp.722-729
• /
• 2005

Ethernet passive optical networks (EPONs) are an emerging access network technology which has a point-to-multipoint topology. EPONs operate point-to-multipoint in the OLT-ONU direction, and point-to-point in the ONU-OLT direction. To support point-to-point emulation and shared LAM emulation, EPONs use multi-point control protocol (MPCP). The MPCP uses logical link identification (LLID) field for frame tagging and filtering between the OLT and ONUs. In this paper, I propose logical-group identification (LGID) for logical link-based multicasting or VLAN services in EPONs. Using LGID with new frame tagging and filtering rules, EPONs support differentiated multimedia broadcasting or multicasting services. Additionally, EPONs can support logical link-based VLAN services that divides ONUs into several subsets.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.2
• /
• pp.160-168
• /
• 1997

A $H_{\infty}$self-tuning control scheme for the tip position of a flexible link robot handling unknown loads is presented here. The scheme essentially comprises a recursive least-squares identification algorithm and $H_{\infty}$self-tunning controller. The $H_{\infty}$control low is designed to be robust to uncertain parameters and the self-tunning action provides adaption to unknown parameters. Through numerical study, the performance comparison of the $H_{\infty}$self-tuning controller with a constant gain $H_{\infty}$controller as well as a LQG self-tuning controller clearly shows its superior ability in handling load changes in quiescent states.nt states.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.4
• /
• pp.1566-1577
• /
• 2018

This paper presents a stability analysis of AC-DC power system feeding a speed controlled DC motor in which this load behaves as a constant power load (CPL). A CPL can significantly degrade power system stability margin. Hence, the stability analysis is very important. The DQ and generalized state-space averaging methods are used to derive the mathematical model suitable for stability issues. The paper analyzes the stability of power systems for both speed control natural frequency and DC-link parameter variations and takes into account controlled speed motor dynamics. However, accurate DC-link filter and DC motor parameters are very important for the stability study of practical systems. According to the measurement errors and a large variation in a DC-link capacitor value, the system identification is needed to provide the accurate parameters. Therefore, the paper also presents the identification of system parameters using the adaptive Tabu search technique. The stability margins can be then predicted via the eigenvalue theorem with the resulting dynamic model. The intensive time-domain simulations and experimental results are used to support the theoretical results.

• Proceedings of the KIEE Conference
• /
• 1993.11a
• /
• pp.304-306
• /
• 1993

In this paper, the authors show a link between a heuristic controller used in industry and a theoretical generalized controller. First, we clarify the internal structure of the generalized two-degree-of-freedom controller which yields a link between the theoretical researches and the practical applications. Secondly, we indicate how to blend identification and control together without any modification of the controller. This is in fact the problem of closed-loop identification. Thirdly, we propose a design technique of a free parameter taking into account a robust stability based on the information obtained from the identification. Finally, we apply the proposed algorithm to trajectory control of DD robot.

• Journal of IKEEE
• /
• v.14 no.4
• /
• pp.297-304
• /
• 2010

This paper presents a link layer design of DisplayPort interface with a state machine based on packet processing. The DisplayPort link layer provides isochronous video/audio transport service, link service, and device service. The merged video, audio main link, and AUX channel controller are implemented with 7,648 LUTs(Loop Up Tables), 6020 register, and 821,760 of block memory bits synthesized using a FPGA board and it operates at 203.32MHz.

• Journal of Internet Computing and Services
• /
• v.16 no.1
• /
• pp.75-82
• /
• 2015

Major corporations and portals have implemented a link server that connects Content Management Systems (CMS) to the physical address of content in a database (DB) to support efficient content use in web-based environments. In particular, a link server automatically connects the physical address of content in a DB to the content URL shown through a web browser screen, and re-connects the URL and the physical address when either is modified. In recent years, the number of users of digital content over the web has increased significantly because of the advent of the Big Data environment, which has also increased the number of link validity checks that should be performed in a CMS and a link server. If the link validity check is performed through an existing URL-based sequential method instead of petabyte or even etabyte environments, the identification rate of dead links decreases because of the degradation of validity check performance; moreover, frequent link checks add a large amount of workload to the DB. Hence, this study is aimed at providing a link server that can recognize URL link deletion or addition through analysis on the B-tree-based Information Identifier count per interval based on a large amount of URLs in order to resolve the existing problems. Through this study, the dead link check that is faster and adds lower loads than the existing method can be performed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.10
• /
• pp.2543-2554
• /
• 1993

In this paper, the kinematic and dynamic analyses of spatial complex kinematic chain are studied. Through the new method both using the set of identification numbers and applying the DenavitHartenberg link representation method to the spatial complex kinematic chain, the kinematic configuration of the chain is represented. Some link in the part of closed chain being fictitiously cutted, the complex kinematic chain is transformed to the branched chain. The kinematic constraint equations are derived from the constraint conditions which the cutted sections of the link have to satisfy. And the joint variables being partitioned in the independent joint variables and the dependent joint variables, the dependent variables are calculated from the independent variables by using the Newton-Raphson iterative method and the pseudoinverse matrix. The equations of motion are derived under the independent joint variables by using the principle of virtual work. Algorithms for dynamic analysis are presented and simulations are done to verify accuracy and efficiency of the algorithms.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.6 no.3
• /
• pp.487-492
• /
• 2002

In this paper, we proposed a control method of an unknown nonlinear system using a dynamical neural network. The proposed method is composed of neural network of state space model type, performs for a unknown nonlinear system, identification with using the dynamical neural network, and then a nonlinear adaptive controller is designed with these identified informations. In order to verify the effectiveness of the proposed method, we simulated one-link manipulator. The simulation results showed the effectiveness of using the dynamical neural network in the adaptive control of one-link manipulator.