• Structural Engineering and Mechanics
• /
• v.47 no.6
• /
• pp.881-898
• /
• 2013

This paper describes analytical investigation into a new dual function system including a couple of shear links which are connected in series using chevron bracing capable to correlate its performance with magnitude of earthquakes. In this proposed system, called Chevron Knee-Vertical Link Beam braced system (CK-VLB), the inherent hysteretic damping of vertical link beam placed above chevron bracing is exclusively utilized to dissipate the energy of moderate earthquakes through web plastic shear distortion while the rest of the structural elements are in elastic range. Under strong earthquakes, plastic deformation of VLB will be halted via restraining it by Stopper Device (SD) and further imposed displacement subsequently causes yielding of the knee elements located at the bottom of chevron bracing to significantly increase the energy dissipation capacity level. In this paper first by studying the knee yielding mode, a suitable shape and angle for diagonal-knee bracing is proposed. Then finite elements models are developed. Monotonic and cyclic analyses have been conducted to compare dissipation capacities on three individual models of passive systems (CK-VLB, knee braced system and SPS system) by General-purpose finite element program ABAQUS in which a bilinear kinematic hardening model is incorporated to trace the material nonlinearity. Also quasi-static cyclic loading based on the guidelines presented in ATC-24 has been imposed to different models of CK-VLB with changing of vertical link beam section in order to find prime effectiveness on structural frames. Results show that CK-VLB system exhibits stable behavior and is capable of dissipating a significant amount of energy in two separate levels of lateral forces due to different probable earthquakes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.1
• /
• pp.5-10
• /
• 2015

D2D (Device-to-Device) communication underlaying LTE-advanced networks is a promising technology to improve the system capacity and spectral efficiency. By sharing the same radio resources with cellular user equipments, D2D communications can significantly enhance the overall spectral efficiency. However, it may cause interference between D2D link and cellular link. Careful resource allocation and interference coordination between cellular and D2D communications are very important and need to be properly handled. This paper proposes a radio resource allocation scheme based on FFFR (Flexible Fractional Frequency Reuse) for D2D communication underlaying cellular networks. The base station selects randomly resource blocks assigned to cellular users, and reuses them for a D2D pair. Through simulations, we have confirmed that the proposed scheme improves the system throughput, reduces the computational complexity, and mitigates the interference of D2D link and cellular link.

• Journal of Energy Engineering
• /
• v.26 no.3
• /
• pp.123-130
• /
• 2017

The district heating system has been successfully implemented with higher efficiency levels of energy production and reduction of carbon emissions during heat generation. Traditionally the system consisted of small number of production and demand sites, but, recently it has evolved into a network with large number of sites interconnected each other. By connecting multiple sites into a network, heat from low-cost production sites can be supplied to distant demand sites so as to lower the total operation cost. In this study, we simulate and analyze distict heating networks focused on critical links. a critical link is defined as a link in which capacity is fully utilized. If a newtork has critical links, then those cricial links become bottlenecks and it is difficult to improve the overall network efficiency.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.193-200
• /
• 2013

Recently, network coding has been actively studied to increase the spectral efficiency of two-way relay wireless channels such as cellular systems as well as broadcasting systems. In this paper, we derive the average transmission capacity and the outage probability of a network coding system, which utilizes two-way data transmission via the best relay rather than multiple relays. Since the data unbalance between the forward and the reverse link in two-way communication systems exists, we include the asymmetric link as well as the symmetric link in the analysis. It is noticed that the space diversity gain increases as the increase of the number of relays. Also we obtain 11.4 dB signal-to-noise ratio (SNR) gain with 9 relays compared to that with single relay in symmetrical link at the given conditions. In asymmetrical links, we denotes that the outage probability is more sensitive to the number of relays rather than data unbalance between the links.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.123-128
• /
• 2024

When mid-span spectral inversion (MSSI), which inverts the propagated wave into phase-conjugated wave in the middle of the entire transmission distance, is combined with dispersion-managed link, it is very effective in compensating for the wavelength division multiplexed (WDM) signal distortion due to chromatic dispersion and nonlinear effects. In this MSSI combined dispersion-managed link, the shape of the dispersion map, channel data rate, channel wavelength and wavelength spacing, etc. affect the compensation and, consequently, determine the transmission distance and capacity of the WDM signal. In this paper, the compensation according to the extinction ratio of the return-to-zero (RZ) pulse that constitutes the WDM signal in the MSSI combined distributed control link was numerically analyzed. As a result of the simulation, it was conformed that the extinction ratio to obtain the best compensation should be determined depending on the shape of the dispersion map and the size of the residual dispersion per span, which determines the specific shape of the dispersion map. These results show a significant difference from the results in a general optical transmission system, where as the extinction ratio increases, the power difference between the '1' and '0' signals increases, thereby improving reception performance.

• Proceedings of the Korean Statistical Society Conference
• /
• 2002.11a
• /
• pp.119-124
• /
• 2002

We consider a multi-state flow network consisted of undirected links and focus on how to find efficiently the union of minimal paths transmitting a required flow when minimal paths are known.

• Information and Communications Magazine
• /
• v.24 no.5
• /
• pp.107-123
• /
• 2007

Multiple antenna technologies have received high attention in the last few decades for their capabilities to improve the overall system performance. Multiple-input multiple-output systems include a variety of techniques capable of not only increase the reliability of the communication but also impressively boost the channel capacity. In addition, smart antenna systems can increase the link quality and lead to appreciable interference reduction.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.6 no.8
• /
• pp.49-53
• /
• 1983

The purpose of this study is to consider models for the production planning of multiproduct. Because these multiproducts use common facilities, labor, and materials, they are able to be considered jointly instead of planned independently. Initially linear programming models will be considered, followed by some examples of modeling and analysis when the cost structure is nonlinear. Basic model components are the following ; (1) inventory balance equations for each product to link successive time periods, and (2) capacity constraints for each period to represent resource limitations.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2008.11a
• /
• pp.1314-1315
• /
• 2008

Recent research work has unearthed that multi-radio multi-channel wireless mesh networks offer considerable capacity gains over single-radio wireless mesh networks. In this paper, we present a new routing metric for multi-radio multi-channel wireless mesh networks. The goal of the metric is to choose multiple link/node disjoint paths between a source and destination node that, when used concomitantly, impart high end-to-end throughput. The proposed metric selects high fidelity paths that will produce elevated throughput with maximum fault tolerance.

• Proceedings of the IEEK Conference
• /
• 2000.11a
• /
• pp.149-152
• /
• 2000

In this paper, the reverse link performance of an imperfect power controlled DS/CDMA cellular system that uses a base station array antenna which can effectively remove the multiple access interference is analyzed considering both beam forming algorithm and power control error in shadowing. The blocking probability of the DS/CDMA cellular system based on array parameters, Eb/No and statistics of interference is derived, and then the system capacity corresponding to a certain blocking probability is calculated. On the assumption that the blocking probability is set 1 ％, the system capacity using MCGM algorithm with 12 antenna arrays is increased about 59 % than that using 8 antenna arrays when power control error is 2.5 ㏈.