• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.589-596
• /
• 2002

Tn the data transmission service of the mobile host, it is needed to reduce the bandwidth and to make a reliable error recovery. there are two appropriate methods in that. One is FEC which retransmits the parity of error recovery, in case of happening of the loss after forming the parity of error recovery by grouping original data. The other is local recovery based on server which can block the implosion of transmission. The use of FEC and local recovery based on server at the same time enables the reliable multicast. This paper suggests algorithm that recovers the loss by FEC and local recovery based on server through the solution of the problems about triangle routing, tunnel convergence by dividing mobile host into two parts-the sender and the receiver. This model about the loss of algorithm tested the efficiency of performance by the homogeneous independent loss, the heterogeneous independent loss, the shared source link loss model. The suggested algorithm confirms effectiveness in the environment where there are much data and many receivers in mobile host.

• Journal of Digital Convergence
• /
• v.13 no.9
• /
• pp.235-242
• /
• 2015

Social network technology has been increasing interest in the big data service and development. However, the data stored in the distributed server and not on the central server technology is easy enough to find and extract. In this paper, we propose a big data management techniques to minimize the processing time of information you want from the content server and the management server that provides big data services. The proposed method is to link the in-group data, classified data and groups according to the type, feature, characteristic of big data and the attribute information applied to a hash chain. Further, the data generated to extract the stored data in the distributed server to record time for improving the data index information processing speed of the data classification of the multi-attribute information imparted to the data. As experimental result, The average seek time of the data through the number of cluster groups was increased an average of 14.6% and the data processing time through the number of keywords was reduced an average of 13%.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.835-837
• /
• 1999

Failover subsystem of computer consists four modes In this paper, These modes will be discussed in more detail. - dual computer mode - failover mode - single computer mode - standby synchronization mode we have suggested the method of dual/redunancy configulation of server computer. Failover is activated by the standby computer, active computer receives a failover request across the inter-computer link immediatly. The active computer controls the scada system and maintains the current state in it's data base and channel system safety.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2002.05a
• /
• pp.205-208
• /
• 2002

The vericut is one of the best CAM application for manufacturing data verification system. It is much applied in most manufacturing company for checking the manufacturing work. Using it a off-line manufacturing system is connected for on-line working on local area network. First, we choose the serial communication to chain an off-line manufacturing system and a personal computer which link with the server running the vericut.

• Journal of KIISE:Information Networking
• /
• v.29 no.5
• /
• pp.573-582
• /
• 2002

We propose centralized server based QoS routing schemes, where a route server is responsible for determining QoS paths on behalf of all the routers in a routing domain. In the proposed server based schemes, the dynamic link QoS state information, which is required for a QoS path computation, is implicitly maintained at route server as it assigns or gets back QoS paths. By maintaining the network state information this way, we may not only eliminate the overhead to exchange network state update message but also achieve higher routing performance by utilizing accurate network state information in path computation. We discuss path caching techniques for reducing the amount of path computation overhead at the route server, and evaluate the performance of the proposed schemes using simulation. The simulation results show that the path caching schemes may significantly reduce the route server load. The proposed schemes are also compared to the distributed QoS routing schemes proposed in the literature. It has been shown that the proposed server based schemes not only enhance the routing performance, but they are also competitive with respect to routing overheads.

• The Transactions of the Korea Information Processing Society
• /
• v.5 no.6
• /
• pp.1441-1456
• /
• 1998

The concept of a hyperpresmtation, as an extension of a hypermedia, is the presentation in which time-varying multimedia presentations are dynamically linked together and a hyperlink's context can be changed over time at any time during a continuous presentation. Problems caused by integrating the hyperpresentation into an existing multimedia system which handles a sequential presentation only are, how to describe the hyperprcsentation, how to set up a hyperlink on a continuous media, and how to check the consistency of the synchronized presentations. In this paper. a new synchronization description method for the hyperpresentation and a method for setting a hyper link on a continuous media during" presentation are proposed after havin!; SHrvey of existing methods, The proposed method deals with only the DC value in a stream ut a DCT based compressed data for checking a condition of te link. Finally, the method for checking the consistency of mixed presentations before actual play of the hnlerpresentation is described. Proposed methods are implemented on MuX(Multimedia IO Server) where a sample scenario is tested.

• Journal of IKEEE
• /
• v.14 no.1
• /
• pp.17-24
• /
• 2010

This paper presents calorie expenditure prediction model of daily activity of elderly living alone for LBS(Location Based Service) applications. The proposed method is to describe the daily activity patterns of older adult using PIR (Passive InfraRed) motion sensors and to examine the relationships between physical activity and calorie expenditure. The developed motion detecting system is composed of a sensing system and a server system. The motion detecting system is a set of wireless sensor nodes which has PIR sensor to detect a motion of elder. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to caregivers for more effective services. The experiment results show the adaptability and feasibility of the calorie expenditure model.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.49 no.1
• /
• pp.39-46
• /
• 2012

We can adapt telemedicine systems in advancement of information technology capabilities and increase of network bandwidth. The telemedicine service can be applied to a public health center, a school, a prison and islands in lacks of medical equipments and medical staffs. The telemedicine services which can be provided high quality medical services. We designed the multiple control server system consisting 3 sub-function, patients and doctors name list, network types, connection states and computer equipments. The telemedicine link configuration was decided as 'Flowing', or 'By-passing' in accordance the network type and bandwidth of patient systems or doctor systems. The multiple control server system was performed the best communication configuration over heterogeneous networks. This system was achieved high quality telemedicine services through dynamic wired and wireless networks at any time. This study represented a hybrid multimedia telemedicine system over heterogeneous networks. We expected that the designed system could provide not only the high quality services, tele-diagnosis and tele-consultation, but also the effective emergency telemedicine services to multi-patients in the heterogeneous network environments.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.12
• /
• pp.45-52
• /
• 2005

This paper proposes low latency handover procedure for seamless connectivity and QoS support between wired (e.g. Ethernet) and wireless (e.g. WLAN, WiBro(802.16-compatible), CDMA) networks by the mobile-assisted and server-initiated handover strategy. It is assumed that the server decides the best target network considering network status and user preferences. In this procedure, a mobile terminal associates with the wireless link decided at the server in advance and receives CoA as well. When handover occurs without the prediction in wired networks, the server performs fast binding update using physical handover trigger through the MIH (media independent handover) function. As a result, a mobile terminal does not need to perform L2 and L3 handover during handover so that this procedure decreases handover latency and loss.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.6
• /
• pp.1223-1230
• /
• 2021

Recently, energy resource management is a major concern around the world. Energy management activities minimize environmental impacts of the energy production. This paper presents design and prototyping of a home electric energy monitoring system that provides residential consumers with real time information about their electricity use. The developed system is composed of an in-house sensing system and a server system. The in-home sensing system is a set of wireless smart plug which have an AC power socket, a relay to switch the socket ON/OFF, a CT sensor to sense current of load appliance and a Kmote. The Kmote is a wireless communication interface based on TinyOS. Each sensing node sends its detection signal to a home gateway via wireless link. The home gateway stores the received signals into a remote database. The server system is composed of a database server and a web server, which provides web-based monitoring system to residential consumers. We analyzed and presented energy consumption data from electrical appliances for 3 months in home. The experimental results show the promising possibilities to estimate the energy consumption patterns and the current status.